Excellent quality for M Metal Slurry Pump for Iceland Factory
Short Description:
Introduction Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc. AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pu...
Product Detail
Product Tags
Related Video
Feedback (2)
Excellent quality for M Metal Slurry Pump for Iceland Factory Detail:
Introduction
Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc.
AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pump is mainly used for transport low density high head or high density low abrasive high head slurry.
M(R) is a kind of middle duty slurry pump, is used to transport the fine particle size and middle density slurry.
The liner and impeller of AH(R) and M(R) model can be changeable and material can be either anti-abrasive metal or rubber, but material of liner and impeller of HH model only can be metal version. Rubber material wet parts are mainly used for transport the slurry which contains fine, non-sharp particle size.
The shaft seals for type AH(R), M(R) and HH pumps can be adoptable of gland seal, expeller seal and mechanical seal. The discharge can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Advantages
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Selection Chart and Performance
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) | Max.Eff. (%) |
NPSH (m) | Impeller. Dia. (mm) | |||
m3/h | l/s | |||||||
1.5 / 1 B -AH | 15 | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 152 |
2 / 1.5 B -AH | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 |
3 / 2 C – AH | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 |
4 / 3 C – AH | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
4 / 3 D – AH | 60 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
6 / 4 D – AH | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
6 / 4 E – AH | 120 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
8 / 6 E – AH | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
8 / 6 R – AH | 300 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
10 / 8 ST -AH | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 |
12 / 10 ST – AH | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 |
14 / 12 ST – AH | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 |
16 / 14 TU – AH | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 |
20 / 18 TU – AH | 1200 | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5-10 | 1370 |
1.5 /1 B -AH(R) | 15 | 10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | 2-4 | 152 |
2 / 1.5 B – AH(R) | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 178 |
3 / 2 C – AH(R) | 30 | 36-75.6 | 10-21 | 13-39 | 1300-2100 | 55 | 2-4 | 213 |
4 / 3 C – AH(R) | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
4 / 3 D – AH(R) | 60 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
6 / 4 D – AH(R) | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
6 / 4 E – AH(R) | 120 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
8 / 6 E – AH(R) | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
8 / 6 R – AH(R) | 300 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
10 / 8 ST – AH(R) | 560 | 540-1188 | 150-330 | 12-50 | 400-750 | 75 | 4-12 | 686 |
12 / 10 ST -AH(R) | 560 | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 762 |
14 / 12 ST – AH(R) | 560 | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3-8 | 965 |
16 / 14 TU – AH(R) | 1200 | 1224-2754 | 340-765 | 9-43 | 250-450 | 82 | 3-8 | 1067 |
20 / 18 TU – AH(R) | 1200 | 2268-4860 | 630-1350 | 11-46 | 200-350 | 82 | 2-8 | 1372 |
10 / 8 E – M | 120 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
10 / 8 R – M | 300 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
1.5 / 1 C -HH | 30 | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 330 |
3 / 2 D -HH | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 |
4 / 3 E -HH | 120 | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 508 |
6 / 4 F – HH | 260 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 711 |
8 / 6 S – HH | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 |
Remark: 1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed |
Construction
The M type slurry pumps have pump bodies that consist of replaceable wear-resistant metal liners or wear-resistant rubber liners, and impellers can also apply wear-resistant metal material or wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and impellers.
Application
M series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
Innovation, good quality and reliability are the core values of our enterprise. These principles today extra than ever form the basis of our success as an internationally active mid-size organization for Excellent quality for M Metal Slurry Pump for Iceland Factory, The product will supply to all over the world, such as: Nigeria, New Delhi, Denver, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance will be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
A quick video about the VISCOLINE, a patented instrument which allows the measurement of viscosity inline. Viscosity is a critical variable for the control of several industrial processes. Knowing real time viscosity and controlling an industrial process accordingly increases productivity and optimizes the quality of finished products.
VIONEC Technologies inc. / KROHNE now offer rheological measurements for plastic fluids.
Its VISCOLINE®, a patented process pipe rheometer, can now measure yield stress and plastic viscosity of fluids like yogurts, process cheese, paints, plasters, oils, tailings, drilling muds, etc.
This new method is based on running through the VISCOLINE® by means of a volumetric pump, different flow rates of the process fluids. The data recorded by the VISCOLINE® system can provide yield stress and plastic viscosity in real-time. Pilot trials have been successfully completed in VIONEC Technologies inc. pilot facility. The results obtained overcame the expectations. Now, this complete solution is offered to our customers.
For more information please visit:
https://www.gvelondon.com/pre-owned/mercedes/sl55-amg-sport-30
Roadandtrack says:
“Think of it as a Viper with breeding. More is better.
And faster. How about 0-60 mph in 4.5 seconds with strong acceleration to 155 mph when the computer caps the power? Or active suspension that offers the option of how much body roll you’d like?
It isn’t magic, it’s AMG, and it begins with the engine under that long, graceful hood. Each AMG V-8 is hand-built in Affalterbach, Germany, from pieces balanced and matched to work as a functional family. That alone, plus the stroke increase to 5.5 liters, would be enough to make many drivers happy, but AMG adds a high-pressure screw-type Lysholm supercharger with Teflon-coated rotors to pump out 11.6 psi of boost. Add the air/water intercooler, put the engine through the dyno test and up come 493 bhp at 6100 rpm and — sorry, Viper guys — 516 lb.-ft. of torque at 2650-4500 rpm.
This is also one of the best-looking supercar performance powerplants — strong and splendid with its sand-cast finish and supercharger ribbing.”
By Julie 2016-10-11 12:41
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Ray 2015-10-15 14:15