Special Design for 100RV-SPR Rubber Sump Pump to Pretoria Factory
Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...
Special Design for 100RV-SPR Rubber Sump Pump to Pretoria Factory Detail:
Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .
The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
– Metal or rubber lined wet parts.
– Vertical construction, less Installation Space.
– Equipped with replaceable shaft protection sleeve.
– Double suction semi-open impeller.
– No submerged bearing or packing.
– Recessed impeller option passes over-sized material.
– Agitator option keeps solids in suspension.
– Can be run in insufficient suction duties.
– Smooth and stable operation.
– Special materials or casting for specific liquid.
||Allowable Max.Power (kw)||Clear Water Performance|
|Capacity Q||Head H (m)||Speed n (r/min)||Max.Eff. (%)||Impeller Dia. (mm)|
Standard Type Extension Type
|NO.||Parts Name||NO.||Parts Name|
|3||Bearing Housing||11||Pump Casing|
|4||Bearing Spacer||12||Lower Strainer|
|8||Strainer||16||Middle Support Part|
Over 20 years’ experience in pumps.
Various pump types.
Wear resistant materials.
Specialized Test Equipment.
Large quantity spare parts.
Anti-rust treatment casting.
Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…
Product detail pictures:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for Special Design for 100RV-SPR Rubber Sump Pump to Pretoria Factory, The product will supply to all over the world, such as: Stuttgart , Holland , Rwanda , Our products have mainly exported to south-east Asia Euro-America, and sales to all of our country. And depending on excellent quality, reasonable price, best service, we've got got good feedback from customers overseas. You are welcomed to join us for more possibilities and benefits. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
(Ms.) Helen Liu
Hefei SUNTON Machinery Manufacturing Co., Ltd.
Add. No.4 Shuangfeng Avenue, Shuangfeng Industrial Zone, Hefei City, China
Tel: +86 18668916700 Fax: +86 551 66335808
QQ: 847607056 Skype ID: nita_seafood
Amphibious Excavator, which is also named as Swamp Excavator, Swamp Backhoe, Marsh Buggy Excavator, Marsh Buggies, Amphibians, Amphibia Excavator, Dredging Excavator, Floating Backhoe, Marsh Excavator, Pontoon Excavator, Mud Buggy, Swamp Buggy Excavator or Swamp buggies etc.
Different from the conventional undercarriage of the construction machinery, the undercarriage of an amphibious excavator or marsh buggy is built on two large steel pontoons with the tracks mounted around them.
Amphibious Excavator’s working conditions are mainly wetlands and soft terrains. Wetlands are areas where water covers the soil, or is present either at or near the surface of the soil all year or for varying periods of time during the year, including during the growing season. They can be saltwater, freshwater, or brackish. The most common categories of wetland are marsh, swamp, and peat bog. Soft-terrain is any ground condition that will not support traditional heavy equipment, even a person can’t stand in that ground.
Amphibious Excavator’s mainly performing the heavy works as below:
1. Dredging projects as cleaning and maintenance of waterways as rivers, lakes, shorelines and river delta etc
2. Swamp marsh or wet terrain construction, Coastal restoration and landscaping.
3. Soil Boring and Levee & wet lands reclamation and development
4. Improving drainages in civil works
5. Environmental remediation and disaster recovery as flood protection and maintenance works or hurricane debris removal
6. Forestry transportation (including right of way clearing and marsh fire fighting)
7. Oil spill and contaminated sediment cleanup,
8. .Storage pit maintenance
9. Highway construction clearing
10. Oil and gas exploration & survey equipment transportation
11. Phone & cable and pipe line works,
Manufacturer or Supplier:
Hefei SUNTON Machinery Manufacturing Co., Ltd., hereinafter referred to as SUNTON, ISO9001:2008 certificated, is the earliest and the most professional OEM manufacturer specializing in amphibious dredging equipment and providing integral dredging solution in China. SUNTON’s major products includes amphibious excavator, amphibious undercarriage and kinds of custom-built amphibious equipment as amphibious draglines, drill buggy, cargo buggies, transporters or carriers and amphibious dumper etc. SUNTON was built in 2005, located in Hefei City, one of the largest industrial centers of heavy duty construction machinery in China. SUNTON Production facility covers 6875 square meters, 74000 square feet, supported by 165 employees.
Series of SUNTON products get the CE certificates and are sold to over 20 overseas countries with good market feedback. On domestic market of amphibious excavators, SUNTON owns a market share more than 60%. It is the appointed and listed equipment supplier of CMC of China for the Government Dredging and Drought Projects. The unique design and sound performance of the amphibious excavators was repeatedly broadcast by CCTV. Thanks to over 10-years consistent dedication of every team member, SUNTON brand image is always top listed in China in the field of amphibious equipment.
Main Product Categories:
1. Amphibious Excavators
Brand New Amphibious Excavators (8-36tons)
Used Amphibious Excavators (20-30tons)
2. Amphibious Undercarriage
Standard Amphibious Undercarriages (5-47tons)
Extendable Amphibious Undercarriage (5-47tons)
3. Supplementary/Additional/Side Pontoons and Spud Stabilizers (5-47tons)
4. Amphibious Cargo Buggies (3-15tons)
5. Amphibious Dumps/Dumpers (3-15tons)
6. Parts and Accessories of Amphibious Equipment
Cutter Suction Dredger
Jet suction dredger
Bucket Chain dredger
8. Mining Machinery
Gold Dredging Machinery
Iron Mining Machinery
9. Aquatic Weed Harvester
10. Sand Processing and Screening Machinery
11. Dredge Pumps
12. Long Reach/High Reach Front Parts
Long Reach Boom
High Reach Demolition Boom
Excavator Short Boom
Grab / Grapple / Gripper / Grappler
Quick Hitch / Coupler / Coupling
13. Oil Drilling Machinery
Steel Wire Rope-Furling Machine
14. Other Custom-Built Amphibious Equipment
SUNTON Amphibious Undercarriage for Drill Rig
Through rubber pipes sand and water mixture is extracted from cleaning tank into slurry pump. The fine sand is collected by the centrifugal force of the cyclone, then fed to the polyurathane screen from the apex spray. The 0.16-3mm fine sand and water are efficiently separated through the vibration screen. The waste water willflow back to the return box, through weld chute or pipes flowing to a settling pond.
By Sara 2016-2-24 14:25
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Aaron 2016-11-25 12:01