Best quality and factory M Metal Slurry Pump to Russia Factory
Short Description:
Introduction Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc. AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pu...
Product Detail
Product Tags
Related Video
Feedback (2)
Best quality and factory M Metal Slurry Pump to Russia Factory Detail:
Introduction
Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc.
AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pump is mainly used for transport low density high head or high density low abrasive high head slurry.
M(R) is a kind of middle duty slurry pump, is used to transport the fine particle size and middle density slurry.
The liner and impeller of AH(R) and M(R) model can be changeable and material can be either anti-abrasive metal or rubber, but material of liner and impeller of HH model only can be metal version. Rubber material wet parts are mainly used for transport the slurry which contains fine, non-sharp particle size.
The shaft seals for type AH(R), M(R) and HH pumps can be adoptable of gland seal, expeller seal and mechanical seal. The discharge can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Advantages
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Selection Chart and Performance
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) | Max.Eff. (%) |
NPSH (m) | Impeller. Dia. (mm) | |||
m3/h | l/s | |||||||
1.5 / 1 B -AH | 15 | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 152 |
2 / 1.5 B -AH | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 |
3 / 2 C – AH | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 |
4 / 3 C – AH | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
4 / 3 D – AH | 60 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
6 / 4 D – AH | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
6 / 4 E – AH | 120 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
8 / 6 E – AH | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
8 / 6 R – AH | 300 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
10 / 8 ST -AH | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 |
12 / 10 ST – AH | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 |
14 / 12 ST – AH | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 |
16 / 14 TU – AH | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 |
20 / 18 TU – AH | 1200 | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5-10 | 1370 |
1.5 /1 B -AH(R) | 15 | 10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | 2-4 | 152 |
2 / 1.5 B – AH(R) | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 178 |
3 / 2 C – AH(R) | 30 | 36-75.6 | 10-21 | 13-39 | 1300-2100 | 55 | 2-4 | 213 |
4 / 3 C – AH(R) | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
4 / 3 D – AH(R) | 60 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
6 / 4 D – AH(R) | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
6 / 4 E – AH(R) | 120 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
8 / 6 E – AH(R) | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
8 / 6 R – AH(R) | 300 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
10 / 8 ST – AH(R) | 560 | 540-1188 | 150-330 | 12-50 | 400-750 | 75 | 4-12 | 686 |
12 / 10 ST -AH(R) | 560 | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 762 |
14 / 12 ST – AH(R) | 560 | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3-8 | 965 |
16 / 14 TU – AH(R) | 1200 | 1224-2754 | 340-765 | 9-43 | 250-450 | 82 | 3-8 | 1067 |
20 / 18 TU – AH(R) | 1200 | 2268-4860 | 630-1350 | 11-46 | 200-350 | 82 | 2-8 | 1372 |
10 / 8 E – M | 120 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
10 / 8 R – M | 300 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
1.5 / 1 C -HH | 30 | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 330 |
3 / 2 D -HH | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 |
4 / 3 E -HH | 120 | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 508 |
6 / 4 F – HH | 260 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 711 |
8 / 6 S – HH | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 |
Remark: 1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed |
Construction
The M type slurry pumps have pump bodies that consist of replaceable wear-resistant metal liners or wear-resistant rubber liners, and impellers can also apply wear-resistant metal material or wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and impellers.
Application
M series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
As a way to provide you advantage and enlarge our organization, we even have inspectors in QC Crew and guarantee you our greatest assistance and product or service for Best quality and factory M Metal Slurry Pump to Russia Factory, The product will supply to all over the world, such as: Hongkong, Bermuda, UK, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
[https://www.homogenisers.net/] Welcome to Harvest Pumps, manufacturer & Exporter of Industrial Homogenizers. Established in the year 1994, we are an ISO 9001:2001 & 2008 certified company catering to Dairy, Cosmetics, Pharma industries with clients like ISRO, ITC and more across the globe, under our brand name “Harvest Pumps” With our precise & durable products, vast range & customized solutions, constant research & development, we are a major player in the industry. Triplex Plunger & Pressure Pumps, Pressure Homogenizers, Stuffing Box & Drive End Spares are our specialized products. Our Triplex plunger pump’s range consists of Plunger Pumps, Industrial Plunger Pumps and High Pressure Triplex Plunger Pumps. Our pressure pumps are available in varied ranges, with or without gear boxes & accessories. We provide pressure homogenisers for Dyes & Chemicals, laboratory, fruit juice, Icecream & other uses. Our Stuffing box product includes Assembly, Secondary Stuffing Box, Homogenizer Valves & Spare Parts, and Pump Valve Assembly & Spacer .We provide drive end spares which includes Oil Seal Cover, Cross Head Sleeve, Connecting Rod Assembly, Main Housing DE & NDE Cover, Tapered Roller Bearing, Crank Shaft & Main Housing Assembly.
Description
By Johnny 2016-10-09 13:47
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Marco 2016-9-28 14:43