Reasonable price for ZGB High Performance Slurry Pump to Australia Factory
Introduction In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main ...
Reasonable price for ZGB High Performance Slurry Pump to Australia Factory Detail:
In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main technical features are as follows,
CAD modern design , super hydraulic performance, high efficiency and lower abrasive rate;
Wide passage, non-clogging and good performance of NPSH;
Expeller seal combined with packing seal and mechanical seal have be adopted to guarantee the slurry from leakage;
Reliability design ensures long MTBF (mean time between events);
The metric bearing with oil lubrication, reasonable lubrication and cooling systems ensure the bearing to be operated under the low temperature;
The materials of wet parts have the good performance of anti-wearing and anti-corrosion.
The pump can be used for seawater ash-removing to prevent it from the corrosion of seawater, salt and mist, and electrochemical corrosion;
The pump can be operated in series with multi-stage within permissible pressure.
The permissible maximum working pressure is 3.6MPa.
The series of pump has the advantages of reasonable construction, high efficiency, reliable operation and easy maintenance. It can be widely used for handling the mixture contained of abrasive and corrosive solids in electric power, metallurgy, mine, coal, constructional material and chemical industry departments, especial for removing ash and sludge in electric power station.
1. The series ZGB(P) slurry pump is of horizontal, single-stage, single-suction, cantilever, double-casing, centrifugal slurry pump. The pump rotates in clockwise viewed from the drive end.
2. The wet parts of ZGB and ZGBP pump at the same outlet diameter can be interchangeable. Their outline installation dimensions are one and the same. For the drive part of the series ZGB(P) slurry pump, the horizontal split frame with oil lubrication and two sets of water cooling systems inside and outside has been adopted. If necessary, cooling water can be supplied. The prepared joint for cooling water and the pressure of the cooling water can be seen in table 1.
3. Two kinds of shaft seal—expeller seal combined with packing and mechanical seal have been used for series ZGB(P) slurry pump.
4. The mechanical seal supplied with high pressure sealing water is recommended when the slurry pump is operated in series(two stages and above two stages), and the expeller seal combined with packing is used in single-stage pump.
|Pump Model||Speed n(r/min)||Capacity Q (l/s)||Head H (m)||Max.Eff.
|Shaft Power (kw)||Impeller Dia (mm)||Pump Weight (kg)||Outlet Dia./Inlet Dia. (mm)
|65ZGB||1480||31.7-15.8||58-61||62.5-47.4||4.5-3.0||28.8-19.9||390||1850||65 / 80|
|80ZGB||980||56.7-28.3||87.5-91.6||66.1-48.7||5.2-2.7||73.7-52.2||485||2500||80 / 100|
|100ZGB||1480||116.7-58.3||85.1-91.8||77.9-57.4||6.0-2.6||124.9-91.4||500||3000||100 / 152|
|150ZGB||980||200-100||85.2-90.0||77.7-53.3||3.8-2.7||215.0-165.5||740||3450||150 / 200|
|200ZGB||980||300.0-150.0||89.0-94.2||76.3-63.2||6.7-2.7||342.9-219.1||740||4000||200 / 250|
|250ZGB||980||400.0-200.0||84.0-90.1||78.2-63.2||7.3-3.3||421.2-275.6||740||4500||250 / 300|
|300ZGB||980||533.3-266.7||84.3-93.4||81.2-68.3||6.9-3.5||542.8-357.6||760||5500||300 / 350|
The water pressure and amount of all kinds of the shaft seal is as follows
Sealing water pressure
For single-stage pump with the expeller seal combined with packing, the water pressure of the shaft seal is 0.2-0.3MPa.
For multi-stage(two and above two stages) in series operation with the expeller seal combined with packing, the sealing water pressure should be:
The lowest sealing water pressure of n stage
Pn= Hi+0.7Hn;Hi is i stage pump head；Hn is n stage pump head.
For mechanical seal, the sealing water pressure of each stage of pump is higher 0.1MPa than pump discharge pressure.
Sealing water pressure(see table 1)
Product detail pictures:
All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for Reasonable price for ZGB High Performance Slurry Pump to Australia Factory, The product will supply to all over the world, such as: India , Spain , United Arab emirates , Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
In this video I show you the Buy GENUINE OEM REDDY HEATER PARTS – ROTOR KIT HA3004 PP204: Space Heater Replacement Parts – ✓ FREE DELIVERY possible on eligible purchases. For more details please visit: http://sekut.top/bestseller/-genuine-oem-reddy-heater-parts-rotor-kit-ha3004-pp204-h-B008TSXGRE.html Thank You!
GENUINE OEM REDDY HEATER PARTS – ROTOR KIT HA3004 PP204 H
Rossmont – Mover M Series
Visit our website http://www.rossmont.com/
M Series specifies a precise range of pumps with same dimensions but different performances. The range is divided in 8 models:
M3400 L/h – 5W
M4600 L/h – 8W
M5800 L/h – 10W
M7200 L/h – 15W
MX9800 L/h – 16W
MX11600 L/h – 18W
MX13400 L/h – 20W
MX15200 L/h – 24W
Developed to have extra compact dimensions but with very high performances, Mover M series is actually the smallest in the world among orientable circulation pumps of its category for marine and freshwater Aquariums.
With its wide and turbulent flow with an action cone of about 120°, concentrable to about 60° with the concentrator nozzle included, Mover has been studied especially to recreate the effect of the natural marine currents on barrier reef.
Compatible also for the utilization with a programmed timer for on/off cycles every 6 hours, thanks to the protection grid (applicable with or without the concentrator nozzle), also the smaller fishes are safe.
Thanks to the 2m long cable and to the magnetic support very compact suitable for glass panes up to 15mm thick, it’s possible to position freely Mover in every point of the tank and to direct it by rotating it on its spherical joint, also with only one hand.
Thanks to the innovative axial rotor with high efficience propeller, the energy consumption is very reduced and therefore the heat transmitted in aquarium it’s extremely low.
With the new VAS technology (Vibration Absorbing System), the normal vibrations of the system are absorbed by apposite components made of special rubber and they are not transmitted to the environment, so guaranteeing an excellent level of silence of the product.
The new ACS technology (Auto Cleaning System) consists in a group of windows and openings positioned in well-defined points that let the water to recirculate in a forced way and so eliminating the residual air, lubricating and cleaning continuously every part of the pump.
This system guarantees the continuous operation of the pump 24/24h without any particular attention and it reduces the maintenance frequency exponentially, increasing remarkably the life of the product.
Thanks to the specific brush, the cleaning of Mover results very quick and it’s easy to reach also the smaller openings.
Made in Italy, it’s for us the possibility to follow each production process in first person.
Each single product is checked for the 100% and this check ends with the apposition of the Serial Number, the identification code that let us understand instantly the history and the technical composition of a product, accessory or spare part of Mover M series.
The High Quality with Rossmont products is not an optional, it comes as standard equipment. With this certainty, we have given to Mover M series an extra 12 months warranty (for a total period of 36 months).
*Available also the optional magnetic support for glasses up to 25mm thick
…and it’s so small?
Rossmont – Mover M Series
Visit our website http://www.rossmont.com/
By Aaron 2016-11-25 12:01
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Andy 2016-6-18 17:47