Ordinary Discount DT Series FGD Pump for Muscat Factory
Short Description:
Product Description Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump. The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pu...
Product Detail
Product Tags
Related Video
Feedback (2)
Ordinary Discount DT Series FGD Pump for Muscat Factory Detail:
Product Description
Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump.
The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pump, recycling pump, sump pump and so on.
Structure Form
Series of DT FGD pump is a horizontal, single casing, single stage, single suction, pedestal or suspension structure pump.
1. Impeller 5. Frame plate liner insert 9. Coupling
2. Volute liner 6. Stuffing box 10. Base plate
3. Suction short pipe 7. Mechanical seal
4. Discharge short pipe 8. Frame
Series of LT FGD pump is vertical, single casing pump. Adding suction pipe can meet the requirements of various operating conditions.
1. Impeller 5. Left support plate 9. Coupling
2. Volute liner 6. Bearing housing 10. Discharge pipe
3. Frame plate liner insert 7. Motor support 11. Right support plate
4. Column 8.Motor 12. Suction pipe
Technical Parameters (DT)
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | Particle Max. Size Handled Occasionally (mm) | Pump Weight (kg) | ||||
Capacity Q | Head H (m) |
Speed n (r/min) | Max.Eff. (%) |
(NPSH)r (m) |
||||
(m3/h) | ||||||||
900DT-F110 | 1600 | 4907-14076 | 8.5-32.7 | 300-490 | 88.3 | 6.5 | 96 | 11800 |
800DT-A90 | 900 | 4104-10690 | 7.8-27.8 | 400-595 | 86.4 | 4.3 | 88 | 7101 |
700DT-A90 | 900 | 3551-8988 | 10.0-33.8 | 400-595 | 86.7 | 5.6 | 68 | 6030 |
700DT-A83 | 630 | 2677-6491 | 8.7-30.2 | 400-595 | 85.9 | 6.0 | 70 | 6002 |
700DT-B78 | 560 | 3378-7200 | 10.0-21.8 | 400-595 | 84.7 | 4.3 | 65 | 5136 |
600DT-A82 | 500 | 1664-5600 | 5.2-27.8 | 300-595 | 88.3 | 2.2 | 152 | 4900 |
500DT-A76 | 400 | 1555-3881 | 9.9-27.9 | 450-595 | 76.8 | 4.5 | 58 | 3512 |
500DT-A70 | 500 | 1908-4399 | 9.3-32.5 | 490-742 | 76.0 | 6 | 55 | 3100 |
400DT-A65 | 400 | 1134-3330 | 8.8-31.1 | 490-472 | 80.1 | 5.2 | 60 | 3200 |
350DT-A78 | 500 | 720-2865 | 11.6-51.1 | 400-720 | 78.0 | 3.5 | 104 | 3700 |
300DT-A60 | 400 | 574-2384 | 8.7-52.0 | 490-989 | 81.1 | 4.3 | 96 | 2790 |
250DT-A75 | 560 | 300-1480 | 20.8-97.5 | 490-980 | 77.5 | 3.0 | 72 | 3191 |
250DT-A45 | 90 | 221-804 | 5.0-27.0 | 490-980 | 68.2 | 6.5 | 56 | 1321 |
200DT-B45 | 90 | 136-639 | 5.5-30.1 | 490-990 | 80.8 | 2.0 | 51 | 1750 |
150DT-A60 | 450 | 156-704 | 28.9-150.0 | 700-1480 | 70.7 | 2.1 | 39 | 1657 |
150DT-B55 | 132 | 139-630 | 11.3-53.7 | 490-990 | 78.1 | 2.3 | 56 | 1540 |
150DT-A50 | 90 | 62-279 | 9.3-44.6 | 490-980 | 65.7 | 2.1 | 30 | 1470 |
150DT-A40 | 132 | 122-503 | 11.2-61.2 | 700-1490 | 73.1 | 2.6 | 40 | 830 |
100DT-A60 | 220 | 71-305 | 29.1-147.0 | 700-1480 | 57.9 | 2.4 | 18 | 890 |
100DT-A50 | 160 | 85-360 | 20.5-100.2 | 700-1480 | 69.6 | 2.5 | 34 | 975 |
100DT-A45 | 90 | 47-228 | 14.8-83.5 | 700-1480 | 58.7 | 2.2 | 22 | 810 |
100DT-A40 | 75 | 61-268 | 12.0-61.0 | 700-1480 | 70.4 | 1.7 | 29 | 620 |
100DT-A35 | 75 | 77-323 | 8.8-45.9 | 700-1480 | 73.2 | 1.9 | 42 | 550 |
80DT-A36 | 37 | 41-167 | 8.9-47.1 | 700-1480 | 62.4 | 1.5 | 16 | 480 |
65DT-A40 | 55 | 34-159 | 11.5-60.1 | 700-1480 | 62.1 | 2.1 | 16 | 490 |
65DT-A30 | 22 | 21-99 | 7.0-35.6 | 700-1470 | 54.6 | 2.2 | 19 | 260 |
50DT-A50 | 90 | 27-111 | 22.3-110.7 | 700-1480 | 45.1 | 3 | 13 | 856 |
50DT-A45 | 55 | 21.6-93.6 | 15.2-81.0 | 700-1480 | 48.4 | 3.6 | 9.5 | 849 |
50DT-B40 | 37 | 24.5-99.5 | 12.0-60.7 | 700-1470 | 55.0 | 3.1 | 14 | 490 |
50DT-A30 | 18.5 | 16-78 | 5.8-35.1 | 700-1460 | 48.5 | 0.8 | 16 | 210 |
40DT-A25 | 45 | 16.8-74.7 | 13.7-88.6 | 1400-2950 | 42.5 | 2.6 | 9 | 185 |
40DT-B20 | 15 | 7.9-37.1 | 10.7-57.5 | 1400-2930 | 53.0 | 0.9 | 7 | 160 |
40DT-A19 | 15 | 7.8-34.9 | 12.3-57.1 | 1400-2930 | 58.8 | 1.2 | 11 | 173 |
40DT-A17 | 7.5 | 4.6-23.4 | 9.2-44.6 | 1400-2900 | 52.4 | 2.5 | 11 | 127 |
25DT-A25 | 4 | 4.7-19.9 | 3.3-21.6 | 700-1400 | 38.0 | 3.3 | 5 | 107 |
25DT-A15 | 5.5 | 4.4-19.3 | 6.2-34.4 | 1390-2900 | 41.8 | 1.3 | 8 | 89 |
Note:1.(NPSH)r:Value of the second speed. 2.Normal partical size: 56% of allowable occasional particle Max. size. |
Applicable Condition
PH value: 2.5~13
Chloride ion concentration: ≤60000ppm
Concentration weight: ≤60%
Medium temperature: ≤120℃
Performance and material characteristics
- High efficiency, long service life and reliable operation.
- The wet parts are made of low carbon stainless steel material.
- Low carbon stainless steel mainly consisting of ferritic has excellent resistance to chloride stress corrosion cracking and higher mechanical strength.
- Less hydraulic friction, the efficiency is higher than the same parameters of the metal pump about 3%.
- Metal pump is easy to control the geometric dimension and high volume efficiency. The pump parts is with high surface and small clearance. The overall efficiency of 5% higher than non-metal pump.
- The wet parts has long-service life and long-term shear wear ability. Shear sliding wear ability of metal protective plate is stronger than that of the common non-metallic materials.
- Dynamic abrasion resistance is 0.008-0.08mm every year, with high tensile strength. The pump performance can be maintained constant in the long-term abrasion conditions
Seal Type
All seal type adopt mechanical seal, divided into a water and anhydrous type.
Water type
Double face mechanical seal with double sets of friction pairs, reliable operation, can achieve the effect of liquid leakage.
Anhydrous type
The self washing mechanical seal with no water medium has the advantages of unique structure, high operation reliability and good water saving effect.
Product detail pictures:
"Control the standard by the details, show the power by quality". Our firm has strived to establish a extremely efficient and stable employees crew and explored an effective excellent command method for Ordinary Discount DT Series FGD Pump for Muscat Factory, The product will supply to all over the world, such as: Denver, America, Paraguay, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We will not live up to the historic opportunity of the times.
Phone us on (08) 6001 6446 for a no obligation discussion.
Are you presently producing the best performance, effectiveness and lifespan from your pumps?
All of our pump repair plan delivers a step-by-step and precise strategy for reconstructing, improving the capabilities & reliability of the rotating equipment.
We include every detail on the balance specification of your impellers, mechanical seals to the bearing protection of your power-ends
By Princess 2016-10-14 18:15
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Janet 2015-10-31 13:33