OEM Manufacturer 250TV-SP Sump Pump to Australia Manufacturers
Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...
OEM Manufacturer 250TV-SP Sump Pump to Australia Manufacturers Detail:
Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .
The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
– Metal or rubber lined wet parts.
– Vertical construction, less Installation Space.
– Equipped with replaceable shaft protection sleeve.
– Double suction semi-open impeller.
– No submerged bearing or packing.
– Recessed impeller option passes over-sized material.
– Agitator option keeps solids in suspension.
– Can be run in insufficient suction duties.
– Smooth and stable operation.
– Special materials or casting for specific liquid.
|Pump Model||Allowable Max.Power (kw)||Clear Water Performance|
|Capacity Q||Head H (m)||Speed n (r/min)||Max.Eff. (%)||Impeller Dia. (mm)|
Standard Type Extension Type
|NO.||Parts Name||NO.||Parts Name|
|3||Bearing Housing||11||Pump Casing|
|4||Bearing Spacer||12||Lower Strainer|
|8||Strainer||16||Middle Support Part|
Over 20 years’ experience in pumps.
Various pump types.
Wear resistant materials.
Specialized Test Equipment.
Large quantity spare parts.
Anti-rust treatment casting.
Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…
Product detail pictures:
All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for OEM Manufacturer 250TV-SP Sump Pump to Australia Manufacturers, The product will supply to all over the world, such as: Falkland Islands (Malvinas) , Georgia , Libya , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Jean 2016-7-23 19:06
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Sharon 2016-10-25 18:05