OEM Factory for ZGB High Performance Slurry Pump to Uruguay Factories
Introduction In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main ...
OEM Factory for ZGB High Performance Slurry Pump to Uruguay Factories Detail:
In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main technical features are as follows,
CAD modern design , super hydraulic performance, high efficiency and lower abrasive rate;
Wide passage, non-clogging and good performance of NPSH;
Expeller seal combined with packing seal and mechanical seal have be adopted to guarantee the slurry from leakage;
Reliability design ensures long MTBF (mean time between events);
The metric bearing with oil lubrication, reasonable lubrication and cooling systems ensure the bearing to be operated under the low temperature;
The materials of wet parts have the good performance of anti-wearing and anti-corrosion.
The pump can be used for seawater ash-removing to prevent it from the corrosion of seawater, salt and mist, and electrochemical corrosion;
The pump can be operated in series with multi-stage within permissible pressure.
The permissible maximum working pressure is 3.6MPa.
The series of pump has the advantages of reasonable construction, high efficiency, reliable operation and easy maintenance. It can be widely used for handling the mixture contained of abrasive and corrosive solids in electric power, metallurgy, mine, coal, constructional material and chemical industry departments, especial for removing ash and sludge in electric power station.
1. The series ZGB(P) slurry pump is of horizontal, single-stage, single-suction, cantilever, double-casing, centrifugal slurry pump. The pump rotates in clockwise viewed from the drive end.
2. The wet parts of ZGB and ZGBP pump at the same outlet diameter can be interchangeable. Their outline installation dimensions are one and the same. For the drive part of the series ZGB(P) slurry pump, the horizontal split frame with oil lubrication and two sets of water cooling systems inside and outside has been adopted. If necessary, cooling water can be supplied. The prepared joint for cooling water and the pressure of the cooling water can be seen in table 1.
3. Two kinds of shaft seal—expeller seal combined with packing and mechanical seal have been used for series ZGB(P) slurry pump.
4. The mechanical seal supplied with high pressure sealing water is recommended when the slurry pump is operated in series(two stages and above two stages), and the expeller seal combined with packing is used in single-stage pump.
|Pump Model||Speed n(r/min)||Capacity Q (l/s)||Head H (m)||Max.Eff.
|Shaft Power (kw)||Impeller Dia (mm)||Pump Weight (kg)||Outlet Dia./Inlet Dia. (mm)
|65ZGB||1480||31.7-15.8||58-61||62.5-47.4||4.5-3.0||28.8-19.9||390||1850||65 / 80|
|80ZGB||980||56.7-28.3||87.5-91.6||66.1-48.7||5.2-2.7||73.7-52.2||485||2500||80 / 100|
|100ZGB||1480||116.7-58.3||85.1-91.8||77.9-57.4||6.0-2.6||124.9-91.4||500||3000||100 / 152|
|150ZGB||980||200-100||85.2-90.0||77.7-53.3||3.8-2.7||215.0-165.5||740||3450||150 / 200|
|200ZGB||980||300.0-150.0||89.0-94.2||76.3-63.2||6.7-2.7||342.9-219.1||740||4000||200 / 250|
|250ZGB||980||400.0-200.0||84.0-90.1||78.2-63.2||7.3-3.3||421.2-275.6||740||4500||250 / 300|
|300ZGB||980||533.3-266.7||84.3-93.4||81.2-68.3||6.9-3.5||542.8-357.6||760||5500||300 / 350|
The water pressure and amount of all kinds of the shaft seal is as follows
Sealing water pressure
For single-stage pump with the expeller seal combined with packing, the water pressure of the shaft seal is 0.2-0.3MPa.
For multi-stage(two and above two stages) in series operation with the expeller seal combined with packing, the sealing water pressure should be:
The lowest sealing water pressure of n stage
Pn= Hi+0.7Hn;Hi is i stage pump head；Hn is n stage pump head.
For mechanical seal, the sealing water pressure of each stage of pump is higher 0.1MPa than pump discharge pressure.
Sealing water pressure(see table 1)
Product detail pictures:
Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for OEM Factory for ZGB High Performance Slurry Pump to Uruguay Factories, The product will supply to all over the world, such as: Kenya , Romania , Uruguay , The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. The above items have passed professional certification, and we not only can produce OEM-standard items but we also accept Customized Merchandise order.
Hope this was worth the wait! So many people helped with this video: Prof John Sperry, Hank Green, Henry Reich, CGP Grey, Prof Poliakoff, my mum filmed for me in beautiful Stanley Park and Jen S helped with the fourth version of the script.
Prof John Sperry http://biologylabs.utah.edu/sperry/john.html
Hank Green (SciShow) http://www.youtube.com/user/scishow
Henry Reich (minutephysics) http://www.youtube.com/user/minutephysics
CGP Grey http://www.youtube.com/user/cgpgrey
Prof Poliakoff (Periodic Videos) http://www.youtube.com/user/periodicvideos
Also thanks to the Palais de la Decouverte – they helped me with the whole vacuum pump setup in Paris. No, I could not actually suck water up 10m – I did about 4m, but the vacuum pump was easily able to do it and I saw spontaneous boiling on all of our various trials. Footage from this may end up on 2Veritasium.
Trees create immense negative pressures of 10′s of atmospheres by evaporating water from nanoscale pores, sucking water up 100m in a state where it should be boiling but can’t because the perfect xylem tubes contain no air bubbles, just so that most of it can evaporate in the process of absorbing a couple molecules of carbon dioxide. Now I didn’t mention the cohesion of water (that it sticks to itself well) but this is implicit in the description of negative pressure, strong surface tension etc.
I will make the some Arduino projects with RC Car this coming days. Maybe I can change the RC Car controller using NodeMCU, nRF24L01 and Bluetooth Module.
High Speed RC Car – https://goo.gl/Lhhrjb
(20% off coupon: 09e1bb)
1 x RC Car
1 x Transmitter
1 x Battery
1 x Charger
Deal – Promotion Sale
Arduino Compatible Component & Electronics – https://goo.gl/zdRvar
15% Off for Hand Spinner (Coupon EDC150) – https://goo.gl/tJ14XB
Up to 55% off for Electronic Tools – https://goo.gl/ujIvCL
Recommended Site – https://goo.gl/V9nYtx
Song: Elektronomia – Limitless [NCS Release]
Music provided by NoCopyrightSounds.
By Christina 2016-8-16 16:55
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Doris 2016-2-18 16:14