OEM China High quality 500WN Dredge Pump for Slovenia Factory

OEM China High quality
 500WN Dredge Pump  for Slovenia Factory

Short Description:

Product Introduction WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad. Features Overall structure performance well in marine use Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. Acco...


Product Detail

Product Tags

Related Video

Feedback (2)

During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of , , , Sincerely hope to build long term business relationships with you and we will do our best service for you.
OEM China High quality 500WN Dredge Pump for Slovenia Factory Detail:

Product Introduction

WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad.

Features

Overall structure performance well in marine use

Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. According to the connection type with the gear box, there are two kinds of typical structure, one is with independent support, the other is combined with gear box. The lubrication of pump with support is grease lubrication or thin oil lubrication. The double casing design can make the pump body safe even when the liner is worn out. Easy to disassemble and  maintenance: WN type dredging pump can be disassembled from front. This make the disassemble and maintenance easier.

Good performance of dredging

Good cavitation performance: WN type dredging pump have good cavitation performance which can ensure suction ability of pump. While it can achieve greater digging depth and higher suction concentration.

High flow capacity and wide applicability: WN type dredge pump impeller passage is very wide to continuous pumping gravel or high plastic clay and not happens jam. Good carrying ability of pump is guarantee for dredger performance.

Sharp Dropping performance curve: The flow and head curve falling steeply makes the mud pump having a stronger adaptability to the change of row spacing.

Achieving various blendings of pump performance: WN dredging pump can change the rotational speed and the diameter of the impeller, to achieve the different head of pump under the same flow.

Wear-resistant and long-life service wet parts

Wet parts of WN dredging pump , such as impeller, volute liner, throat bushing and frame plate liner insert(wearable liner) adopt alloy cast iron material whose hardness is not less than 58HRC. It has not only impact on resistance but also high anti-abrasion performance.

The service life of each part is fully considered in the process of product design. The same replacement cycle reduces the maintenance and replacement costs.

Small hydraulic loss, high efficiency, low power consumption: Due to the advanced hydraulic model, the dredging pump has high efficiency level. The efficiency of WN dredging pump is higher about 2-3 percentage points than imported. Thus, in the same production, it can achieve lower fuel consumption.

A reliable seal and no leakage

200WN-500WN dredge pump adopts mechanical seals or packing seals or combination of  mechanical and packing seals.

600WN(Q)-1000WN(Q) dredge pump adopts shaft seal with L-shaped screw shell rubber seal device which has three L-shaped seal rings and one shaft sleeve with special thread.

Technical Parameters

Pump Model            Capacity               Q (m3/h)         Head            H (m)        Speed              n    (r/min)       Eff.        (%)    NPSHr   (m)    Inlet Diameter (mm) Outlet Diameter (mm)   Max. Diameter of Flowd Particle  (mm)
200WNQ 600-800 20-40 700-900 60-65 <4.5 250 200 178
200WN 750-1000 40-65 700-850 70-72 <4 250 200 180
250WNQ 950-1100 20-40 500-700 65-70 <4 300 250 220
250WN 1100-1300 40-65 500-650 70-74 <4 350 250 144
300WNQ 1500-1800 20-40 400-600 65-68 <4 350 300 241
300WN 1800-2200 40-65 400-550 74-78 <4 450 300 241
350WN 2600-3000 40-65 400-550 74-78 <4.5 450 350 245
400WN 2800-3200 20-40 400-550 74-78 <4.5 450 400 250
450WN 3200-3850 40-67 350-500 76-80 <4.5 600 450 354
500WNQ 3600-4200 20-40 220-320 72-75 <4.8 600 500 330
500WN 4500-5500 30-72 350-450 78-80 <4.8 650 500 250
600WN 5000-9000 30-75 280-420 81-85 <6 660 600 220
700WN 8000-12000 30-76 280-380 83-85 <6 760 700 280
800WN 10000-15000 28-72 260-350 80-84 <6 900 800 300
900WN 12000-19000 25-75 220-330 85-87 <6 960 900 320
1000WN 16000-25000 23-76 181-290 85-87 <6 1200 1000 350

Product detail pictures:

OEM China High quality
 500WN Dredge Pump  for Slovenia Factory detail pictures


"Sincerity, Innovation, Rigorousness, and Efficiency" will be the persistent conception of our company to the long-term to establish together with customers for mutual reciprocity and mutual gain for OEM China High quality 500WN Dredge Pump for Slovenia Factory, The product will supply to all over the world, such as: Singapore , belarus , Russia , As an experienced factory we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of the company is to live a satisfactory memory to all the customers, and establish a long term win-win business relationship. For more information, please contact us. And It is our great pleasure if you like to have a personally meeting in our office.


  • This video tutorial will show you how to remove and replace a wear ring in a sea-doo jet ski pump in about 5 minutes time.



    To view this product, please visit our website here: https://www.machinemart.co.uk/p/psp125-puddle-pump/?da=1&TC=YT-051010125

    Clarke’s PSP125 Submersible Pump – designed for draining surface water, spilled water and flood water from domestic appliances. Ideal for pumping out waste water from flooded areas, cellars & sumps too. The PSP125 is incredibly useful for clearing particularly shallow bodies of water because of its ability to pump within a matter of a few millimetres off the floor.

    High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
















    5 Stars By Christian 2016-5-15 15:15
    This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.

    5 Stars By Danny 2016-9-14 19:18