OEM China High quality 18/16G-G Gravel Sand Pump for Poland Factory
Product Features Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps. Construction Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. ...
OEM China High quality 18/16G-G Gravel Sand Pump for Poland Factory Detail:
Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni_hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
1.Support 8. Discharge Joint Ring
2.Bearing Housing Assembly 9. Discharge Flang
3.Adapter Plate Clamp Band 10. Door Clamp Band
4.Volute Liner Seal 11. Cover Plate
5.Frame Plate Liner Insert 12. Intake joint ring
6. Impeller 13. Intake flange
7. Frame Plate / Bowl 14. Adapter plate
|Clear Water Performance|
|Capacity Q|| Head
|Impeller. Dia. (mm)|
The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.
Product detail pictures:
Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for OEM China High quality 18/16G-G Gravel Sand Pump for Poland Factory, The product will supply to all over the world, such as: Saudi Arabia , Mauritania , Samoa , Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!
Subsea Tooling Services (STS), an Aberdeen-shire based company offering a diverse range of subsea equipment, recently completed final tests of their new Predator Subsea Dredger at our open-water site in Fort William. Watch video from the trial and read more about how the subsea tests were achieved.
Proving the Predator Subsea Dredger
Their main objective was to prove that the Predator Subsea Dredger was as efficient, if not better, than the other dredgers that are currently on the market. As this dredging system is a new concept in the world market, STS needed to prove its capabilities to their clients and confirm their development tests by filming the dredger in action in conditions such as it will be used in offshore. The subsea trials more than exceeded their expectations in terms of efficiency and performance.
The dredger underwent a number of trials, fitted to the Triton XL26 work class ROV used for training and trials at The Underwater Centre;
• The initial aim was to time how long it took to dredge the yellow kort nozzle that can be seen in this video, which had been rock dumped with 9 tonnes of 50-60mm rocks. The task was completed between 8-9 minutes, making the dredging rate 1 ton per minute.
• The next step was to dredge larger rocks. The Predator system dredged 100-130mm rocks in attempt to break the dredger and looking for weak spots, but none were found, proving the strength of the system.
• Finally, the agitator system was tested. This system shoots out jets of water at the suction head end, directly into the seabed, breaking up the peat at the bottom of Loch Linnhe and dredging it at the same time. This is a unique function on the Predator dredger which worked exceptionally well while not affecting the performance of the dredger.
The Predator can also be reconfigured subsea with the use of a second work class ROV or diver.
Find out more about subsea trials and testing on our website here: http://www.theunderwatercentre.com/fort-william/subsea-trials/
PULSEGUARD, THE “PUMPGUARD” a hose type pulsation dampener, with a “CLEARFLOW” path. can handle sludge, slurry, and liquids containing solid particulate .Ideal for eliminating suction acceleration head losses. An M. Packer design.
CHOICE OF SIZES, PLEASE SEE :-
http://www.pulseguard.com/dampener-sizes/index.html#pumpguards, AND Bladder type at :-
By Fiona 2015-11-20 10:21
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Carlos 2016-6-08 15:58