Newly Arrival M Metal Slurry Pump for Venezuela Importers
Introduction Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc. AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pu...
Newly Arrival M Metal Slurry Pump for Venezuela Importers Detail:
Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc.
AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pump is mainly used for transport low density high head or high density low abrasive high head slurry.
M(R) is a kind of middle duty slurry pump, is used to transport the fine particle size and middle density slurry.
The liner and impeller of AH(R) and M(R) model can be changeable and material can be either anti-abrasive metal or rubber, but material of liner and impeller of HH model only can be metal version. Rubber material wet parts are mainly used for transport the slurry which contains fine, non-sharp particle size.
The shaft seals for type AH(R), M(R) and HH pumps can be adoptable of gland seal, expeller seal and mechanical seal. The discharge can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Selection Chart and Performance
|Pump Model|| Allowable
|Clear Water Performance|
|Speed n (r/min)||Max.Eff.
|NPSH (m)||Impeller. Dia. (mm)|
|1.5 / 1 B -AH||15||12.6-28.8||3.5-8||6-68||1200-3800||40||2-4||152|
|2 / 1.5 B -AH||15||32.4-72||9-20||6-58||1200-3200||45||3.5-8||184|
|3 / 2 C – AH||30||39.6-86.4||11-24||12-64||1300-2700||55||4-6||214|
|4 / 3 C – AH||30||86.4-198||24-55||9-52||1000-2200||71||4-6||245|
|4 / 3 D – AH||60||86.4-198||24-55||9-52||1000-2200||71||4-6||245|
|6 / 4 D – AH||60||162-360||45-100||12-56||800-1550||65||5-8||365|
|6 / 4 E – AH||120||162-360||45-100||12-56||800-1550||65||5-8||365|
|8 / 6 E – AH||120||360-828||100-230||10-61||500-1140||72||2-9||510|
|8 / 6 R – AH||300||360-828||100-230||10-61||500-1140||72||2-9||510|
|10 / 8 ST -AH||560||612-1368||170-380||11-61||400-850||71||4-10||686|
|12 / 10 ST – AH||560||936-1980||260-550||7-68||300-800||82||6||762|
|14 / 12 ST – AH||560||1260-2772||350-770||13-63||300-600||77||3-10||965|
|16 / 14 TU – AH||1200||1368-3060||380-850||11-63||250-550||79||4-10||1067|
|20 / 18 TU – AH||1200||2520-5400||700-1500||13-57||200-400||85||5-10||1370|
|1.5 /1 B -AH(R)||15||10.8-25.2||3-7||7-52||1400-3400||35||2-4||152|
|2 / 1.5 B – AH(R)||15||25.2-54||7-15||5.5-41||1000-2600||50||2.5-5||178|
|3 / 2 C – AH(R)||30||36-75.6||10-21||13-39||1300-2100||55||2-4||213|
|4 / 3 C – AH(R)||30||79.2-180||22-50||5-34.5||800-1800||59||3-5||245|
|4 / 3 D – AH(R)||60||79.2-180||22-50||5-34.5||800-1800||59||3-5||245|
|6 / 4 D – AH(R)||60||144-324||40-90||12-45||800-1350||65||3-5||365|
|6 / 4 E – AH(R)||120||144-324||40-90||12-45||800-1350||65||3-5||365|
|8 / 6 E – AH(R)||120||324-720||90-200||7-49||400-1000||65||5-10||510|
|8 / 6 R – AH(R)||300||324-720||90-200||7-49||400-1000||65||5-10||510|
|10 / 8 ST – AH(R)||560||540-1188||150-330||12-50||400-750||75||4-12||686|
|12 / 10 ST -AH(R)||560||720-1620||200-450||7-45||300-650||80||2.5-7.5||762|
|14 / 12 ST – AH(R)||560||1152-2520||320-700||13-44||300-500||79||3-8||965|
|16 / 14 TU – AH(R)||1200||1224-2754||340-765||9-43||250-450||82||3-8||1067|
|20 / 18 TU – AH(R)||1200||2268-4860||630-1350||11-46||200-350||82||2-8||1372|
|10 / 8 E – M||120||540-1440||150-400||14-60||600-1000||73||4-10||549|
|10 / 8 R – M||300||540-1440||150-400||14-60||600-1000||73||4-10||549|
|1.5 / 1 C -HH||30||16.2-34.2||4.5-9.5||25-92||1400-2200||20||2-5.5||330|
|3 / 2 D -HH||60||68.4-136.8||19-38||25-87||850-1400||47||3-7.5||457|
|4 / 3 E -HH||120||126-252||35-70||12-97||600-1400||50||2-5||508|
|6 / 4 F – HH||260||324-720||90-200||30-118||600-1000||64||3-8||711|
|8 / 6 S – HH||560||468-1008||130-280||20-94||500-1000||65||4-12||711|
1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point).
2. NPSH: appropriate to point Q recommended at highest speed
The M type slurry pumps have pump bodies that consist of replaceable wear-resistant metal liners or wear-resistant rubber liners, and impellers can also apply wear-resistant metal material or wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and impellers.
M series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for Newly Arrival M Metal Slurry Pump for Venezuela Importers, The product will supply to all over the world, such as: Portland , Hyderabad , Israel , In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
Learn more at http://www.arblueclean.com
AR Blue Clean Assembly Instructions:
Although your AR Blue Clean unit may be different from the one used in this video, these instructions will help you assemble and operate your unit.
Make sure machine is turned off by placing the starter switch in the Off or O position.
Connect the threaded end of the high pressure hose to the unit. This will be on the front or back of the machine.
Connect the silver metal end of the high pressure hose to the spray gun. You will hear it click into place. Make sure the spray gun is in the locked position. Later on, when you are ready to start cleaning, this will be released.
Insert the nozzle into the spray gun by pushing together and turning clockwise. To remove later, turn it counter clockwise.
To connect the garden hose to the machine, thread the blue and black adapter to the end of your garden hose. Now thread the clear filter adapter to the machine. If dirt is visible in the filter, remove and back flush to clean.
If your unit didn’t come with a two piece filter adapter, and it came with an adapter like this, that threads onto the machine at the pump inlet, and then the hose is threaded directly on. Note the pump and hose marking, so you put it on correctly.
AR Blue Clean Operating Instructions
Unwind the power cord completely, and plug the GFCI into a grounded 120 Volt outlet. Press the reset button on the GFCI plug. This will have to be done each and every time it is plugged in.
Attach the garden hose to the machine. This will be on the front or back of the unit.
Make sure the high pressure hose it attached to the machine and the spray gun, and now turn on the water supply at the faucet.
Release the safety lock on the spray gun, and while pointing it in a safe direction, squeeze the trigger gun until there is a steady stream of water, letting the water and air out of the hose.
Turn the starter switch to the On or Off position. The motor and pump should now be ready to run, and provide a high pressure spray.
Pull the trigger on the spray gun to activate the total stop system, turning the machine on, and now you can start cleaning. Releasing the spray gun automatically turns the unit off.
Select desired spray pattern by twisting the nozzle, going from a 45 degree fan spray for delicate items all the way to a 0 degree straight laser spray for a more intense spray, or for reaching up high.
Always test first in an inconspicuous area to make sure you don’t damage the surface.
For detergent application, fill the soap bottle with the desired cleaner, and attach to the trigger gun after removing the wand assembly. Always test detergent first to make sure it is compatible with the surface being cleaned.
Pull the trigger, and start the detergent spray onto the surface to be cleaned.
Reverse the processes to shut down, and remember to keep the unit from freezing during the offseason.
Before you start cleaning, refer to the manual for detailed instructions and safety precautions, as models may vary.
Engineering . Dredging . Geology In Nigeria
By Matthew 2016-11-18 17:10
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
By Christina 2016-8-16 16:55