Newly Arrival 8/6E-G Sand Pump to UK Manufacturer

Newly Arrival 
 8/6E-G Sand Pump  to UK Manufacturer

Short Description:

Product Features Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps. Construction                          Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. ...


Product Detail

Product Tags

Related Video

Feedback (2)

We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for , , , We have been wanting forwards to creating long-term company interactions with around the world shoppers.
Newly Arrival 8/6E-G Sand Pump to UK Manufacturer Detail:

Product Features

Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.

Construction                         

Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni_hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.

19_副本 

      1.Support                                                8. Discharge Joint Ring 

      2.Bearing Housing Assembly                    9. Discharge Flang

      3.Adapter Plate Clamp Band                    10. Door Clamp Band

      4.Volute Liner Seal                                  11. Cover Plate

      5.Frame Plate Liner Insert                        12. Intake joint ring

      6. Impeller                                               13. Intake flange

      7. Frame Plate / Bowl                              14. Adapter plate

Performance Chart

                  Pump   Model Allowable
Max. Power
(kw)
                                  Clear Water Performance  
 Capacity  Q  Head
  H   (m)
Speed
  n (r/min) 
Max.Eff.
(%)
  NPSH
(m)
 Impeller. Dia.  (mm)
      m3/h                  l/s           
6/4D-G 60 36-250 10-70 5-52 600-1400 58 2.5-3.5 378
8/6E-G 120 126-576 35-160 6-45 800-1400 60 3-4.5 378
10/8S-GH 560 216-936 60-260 8-52 500-1000 65 3-7.5 533
10/8S-G 560 180-1440 50-400 24-30 500-950 72 2.5-5 711
12/10G-G 600 360-1440 100-400 10-60 400-850 65 1.5-4.5 667
12/10G-GH 1200 288-2808 80-780 16-80 350-700 73 2.0-10.0 950
14/12G-G 1200 576-3024 160-840 8-70 300-700 68 2.0-8.0 864
16/14G-G 600 720-3600 200-1000 18-44 300-500 70 3.0-9.0 1016
16/14TU-G 1200 324-3600 90-1000 26-70 300-500 72 3.0-6.0 1270
18/16TU-G 1200 720-4320 200-1200 12-48 250-500 72 3.0-6.0 1067

Applications
The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.


Product detail pictures:

Newly Arrival 
 8/6E-G Sand Pump  to UK Manufacturer detail pictures


We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most aggressive costs. So Profi Tools offer you finest benefit of money and we are ready to produce alongside one another with Newly Arrival 8/6E-G Sand Pump to UK Manufacturer, The product will supply to all over the world, such as: Canada , moldova , Saint Lucia , Welcome to visit our company, factory and our showroom where displays various products that will meet your expectation. Meanwhile, it is convenient to visit our website, and our sales staff will try their best to provide you the best service. Please contact us if you need more information. Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation.


  • Suzhou Smart Motor Equipment Manufacturing Co.,Ltd
    R&D and manufacturing induction motor production machines, such as Coil Winding Machine & Coil Inserting Machine etc.
    Contact: Daisy Wu E-mail: daisywu@smart-js.com
    Website: www.smart-js.com



    In the Northern countries up to 80% of energy consumed in the building goes on heating and hot water. The Heating And Air Conditioning System PolarSol is designed to operate in cold climates in dual/symmetric modes covering up to 100% of demand for hot water, heating and air-conditioning all year round from renewable sources and waste heat recovery.

    The PolarSol system consists of seven innovative, easy to install components that allow it to operate at the highest level of efficiency and safety and in the most effective cost saving and energy saving modes.

    Energy efficiency of the PolarSol system is achieved through the high efficiency performance of its individual innovative components:
    • System controls
    • Symbiotic type collector/ Helio-Air Heat Receiver
    • Heat Storage Water Tank
    • Multifunctional solar boiler
    • Waste Water Heat Recovery Recuperator
    • Ventilation and other waste heat recovery recuperators, and
    • Heat pump

    The PolarSol system is environmentally friendly and economically feasible. The system allows for a simultaneous use of solar thermal energy, heat energy from the air and ground, as well as effective utilisation and recovery of heat from waste waters. The system is capable to recover heat losses from any major heat source in the building, thereby closing up the heat circulation cycle. This ensures extreme energy efficiency, energy savings and fast payback time for the client. For example: the annual electricity consumption for heating an average size house in Finland of 100 m2 constitutes about 15,000 — 20,000 Kw. With the cost of 0.10 Euros/$0.14 cent per 1 kWh of electricity the system’s payback time is about 6 years. The average price of the Polarsol system is about 10,000 Euros/$14,000 USD. Some of the PolarSol system components (i.e. the heat pump and system controls) require limited amounts of electricity to operate, which constitutes approximately one fifth of the total cost of heating by electricity.

    The PolarSol system design incorporates innovative flue gas and ventilation heat recovery recuperators. The recuperators can recover heat from the air circulation in the house as well as from wood burning stoves, fire places, saunas, hot tubs etc.

    PolarSol innovative symbiotic type collectors can receive thermal energy from the sun and air, thanks to the patented ultrathin stainless steel heat absorbers and technical solutions which not only allow to absorb solar thermal energy, but also work as the air source heat pump on cloudy days or in the winter time. In the summer, apart from heating up water the system functions as a high efficiency air conditioning system.
    The system’s Heat Storage Water Tank of 6 m3 (expandable to 12,18 m3. ) is buried in the ground or installed in the basement. It plays not only a role of energy storage from heat sources (collectors and heat recovery recuperators), but also heats up adjacent grounds throughout the year. Therefore, the heat storage tank is also able to operate as the heat pump well for heat recovery from the ground.

    PolarSol Multifunctional Solar Boiler has no analogues in the world. It is the only boiler on the market today that allows linking of up to ten circulation circuit loops, heat exchangers (unclear).

    PolarSol Waste Water Heat Recovery Recuperator allows for the collection of heat from the heated waste water in the sewage system and recovers almost all of the heat collected by other hot water heating system components.

    PolarSol Flue Gas Heat and Ventilation Heat Recovery Recuperator allows to recover heat discharged from the furnace or flue gases. Both types of heat recuperators allow to minimize the heat loss from a house and further optimize cost effectiveness of heating, specifically the cost operating the heat pumps.

    PolarSol system uses reliable and inexpensive compact heat pumps of 2.7- 7,5 — 15 – 25 kW of heat capacity, depending on size of the building. The system can operate using one, two or more heat pumps on the cascade principle, depending on the needs and climate conditions (work in standby mode), which makes the system an extremely robust and wear resistant.

    All PolarSol system control components operate based on forecast and analysis of the data from its own system sensors.

    Live Monitoring Links to objects in Finland:

    http://www.polarsol.com/en/object1.html

    http://www.polarsol.com/en/object13.html

    This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.

    5 Stars By Ryan 2016-10-01 11:44
    The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.















    5 Stars By Annie 2016-5-18 14:28