Manufacturer for 65QV-SP Vertical Sump Pump for Toronto Factories
Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...
Manufacturer for 65QV-SP Vertical Sump Pump for Toronto Factories Detail:
Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .
The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
– Metal or rubber lined wet parts.
– Vertical construction, less Installation Space.
– Equipped with replaceable shaft protection sleeve.
– Double suction semi-open impeller.
– No submerged bearing or packing.
– Recessed impeller option passes over-sized material.
– Agitator option keeps solids in suspension.
– Can be run in insufficient suction duties.
– Smooth and stable operation.
– Special materials or casting for specific liquid.
||Allowable Max.Power (kw)||Clear Water Performance|
|Capacity Q||Head H (m)||Speed n (r/min)||Max.Eff. (%)||Impeller Dia. (mm)|
Standard Type Extension Type
|NO.||Parts Name||NO.||Parts Name|
|3||Bearing Housing||11||Pump Casing|
|4||Bearing Spacer||12||Lower Strainer|
|8||Strainer||16||Middle Support Part|
Over 20 years’ experience in pumps.
Various pump types.
Wear resistant materials.
Specialized Test Equipment.
Large quantity spare parts.
Anti-rust treatment casting.
Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…
Product detail pictures:
Our business sticks for the basic principle of "Quality could be the life with the firm, and track record will be the soul of it" for Manufacturer for 65QV-SP Vertical Sump Pump for Toronto Factories, The product will supply to all over the world, such as: Sao Paulo , Mauritius , Argentina , Our mission is to deliver consistently superior value to our customers and their clients. This commitment permeates everything we do, driving us to continuously develop and improve our products and the processes to fulfill your needs.
Working up this remote creek in the mangrove swamps of the Niger Delta is this 3 year old Ellicott Dragon 670 cutter suction dredge with 14 by 14 pumping system and extended ladder after being trucked from Lagos just 2 weeks ago. The dredge reassembly was easily handled by the owner’s crew at the dredging site.
The Dragon 670 , like its little brother the Dragon 370HP, is very well known for its simple rugged design that makes it ideal for newcomers to the dredging business, and with its traditional user-friendly control system as a Standard feature, it is well suited to tropical conditions; anyone can learn how to operate or service it.
In this sand stockpiling project the pumping distance is a short 300mtrs while for the last 3 years the work in Lagos required between 500 to 1000mtrs, well handled by this powerful dredge. All the sand shown here, being groomed by the bulldozer in the distance, was pumped in the 2 weeks since start-up. In fact this 670 series dredge owner has been so pleased with his dredge performance and minimal down-time, that he bought a second Ellicott 670 with the flexible HDPE pipeline such as seen here, and looks to further expand his fleet this year.
Visit Ellicott Dredges at http://www.dredge.com
By Amber 2016-10-03 13:45
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By David 2015-12-13 16:53