Manufactur standard 40PV-SP Belt Drive Sump Pump to Vietnam Manufacturer
Short Description:
Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...
Product Detail
Product Tags
Related Video
Feedback (2)
Manufactur standard 40PV-SP Belt Drive Sump Pump to Vietnam Manufacturer Detail:
Introduction
Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .
The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
Features
– Metal or rubber lined wet parts.
– Vertical construction, less Installation Space.
– Equipped with replaceable shaft protection sleeve.
– Double suction semi-open impeller.
– No submerged bearing or packing.
– Recessed impeller option passes over-sized material.
– Agitator option keeps solids in suspension.
– Can be run in insufficient suction duties.
– Smooth and stable operation.
– Special materials or casting for specific liquid.
Technical Parameters
| Pump Model |
Allowable Max.Power (kw) | Clear Water Performance | |||||
| Capacity Q | Head H (m) | Speed n (r/min) | Max.Eff. (%) | Impeller Dia. (mm) | |||
| m3/h |
l/s |
||||||
| 40PV-SP | 15 | 19.44-43.2 | 5.4-12 | 4.5-28.5 | 1000-2200 | 40 | 188 |
| 40PV-SPR | 17.28-39.6 | 4.8-11 | 4–26 | 1000-2200 | 40 | 188 | |
| 65QV-SP | 30 | 23.4-111 | 6.5-30.8 | 5-29.5 | 700-1500 | 50 | 280 |
| 65QV-SPR | 22.5-105 | 6.25-29.15 | 5.5-30.5 | 700-1500 | 51 | 280 | |
| 100RV-SP | 75 | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 370 |
| 100RV-SPR | 64.8-285 | 18-79.2 | 7.5-36 | 600-1200 | 62 | 370 | |
| 150SV-SP | 110 | 108-479.16 | 30-133.1 | 8.5-40 | 500-1000 | 52 | 450 |
| 200SV-SP | 110 | 189-891 | 152.5-247.5 | 6.5-37 | 400-850 | 64 | 520 |
| 250TV-SP | 200 | 261-1089 | 72.5-302.5 | 7.5-33.5 | 400-750 | 60 | 575 |
| 300TV-SP | 200 | 288-1267 | 80-352 | 6.5-33 | 350-700 | 50 | 610 |
Construction
Standard Type Extension Type
|
NO. |
Parts Name |
NO. |
Parts Name |
|
1 |
Shaft |
9 |
Back Liner |
|
2 |
Bearing |
10 |
Impeller |
|
3 |
Bearing Housing |
11 |
Pump Casing |
|
4 |
Bearing Spacer |
12 |
Lower Strainer |
|
5 |
Bearing |
13 |
Discharge Pipe |
|
6 |
Shim |
14 |
Flushing Pipe |
|
7 |
Column |
15 |
Coupling Part |
|
8 |
Strainer |
16 |
Middle Support Part |
Advantages
Over 20 years’ experience in pumps.
Various pump types.
Wear resistant materials.
Specialized Test Equipment.
Large quantity spare parts.
Anti-rust treatment casting.
Application
Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…
Product detail pictures:
Our commission is to serve our buyers and purchasers with most effective good quality and aggressive portable digital goods for Manufactur standard 40PV-SP Belt Drive Sump Pump to Vietnam Manufacturer, The product will supply to all over the world, such as: United Kingdom , Belarus , Angola , With the enterprising spirit of" high efficiency, convenience, practicality and innovation", and in line with such serving guidance of "good quality but better price, " and "global credit", we've been striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
Septic Sewage Pumps.com Linear Air Pumps Maintenance Video
Click Here To Subscribe! ► http://bit.ly/JOovvU – ALL iNFO HERE: 1080p HD to feel like You’re on the JOB Site! Ever wanted to get an Up-Close look at the RC4WD Excavator & Dump Truck? (Hydraulic of course!) I have been researching construction RC for about 2 years – and am VERY excited to finally get these two into my studio! What an excellent combo of “working for the man” and a Kick-Butt Hobby!
Believe me, until you try this type of RC – you may never understand the addiction to constructionism! Now when my wife asks me to do the gardening – I will gladly agree! These are like Tonka Trucks on Steroids! My friends – I know you want links, and Specs to these RCs – so the best thing I can do is list some from the RC4WD website below. Hope it helps! For now, I have to get outside for more diggin’!
Heads UP: Decals seen in video are NOT iNCLUDED with the RC’s.. they are mine..
From the RC4WD Website: http://store.rc4wd.com/
Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C.
TRUCK: 1/14 8×8 Armageddon Hydraulic Dump Truck: http://goo.gl/lUnsQa
The Armageddon is one of the most powerful R/C hydraulic dump truck available today. Highly detailed base on European style dump truck. Engineered specifically for the tough demands of transporting gravel, sand, asphalt, snow, wood chips or rocks. Created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 1000kV high speed brushless system.
Specification:
Hard plastic European style front Cab
Full metal 2 speed transmission (Planetary gears)
European style V shape dumper
Full electronic sound system (engine start, idle and more)
Transfer case (billet alum)
Scale fuel tank (billet alum)
Super scaled leaf spring suspension setup
Scale rims (billet alum)
Remote lockable rear axle (locking differential)
Full metal front and rear axle housing
Steel scale drive shaft
Realism front cab latch
Retractable steel ladder
Molded functional fuel tank (filled with hydraulic oil)
Automatic trailer gate (do not attempt to open it by hand)
Retractable steel ladder
Rear light guard (protect against rock)
Scale light bucket (fit 3-5mm LED)
Recommended payload: 16kg/35lbs
Maximum lift power: 42kg/92lbs
Fully painted
Scale fire extinguishers and spare wheel/tire
Cylinder maximum thrust: 109kg/231 lbs
Brushed driven motor
1000kV Brushless motor-driven micro hydraulic pump
Length: 687mm/27inch
Width: 186mm/7.3inch
Height: 262mm/10.3inch
Weight: 8kg/17lbs
Axle gear ratio: 2.6:1
Transfer case gear ratio: 1:1
Theoretical load: 15kg/33lbs
Load total mass: 23kg/50lbs
First gear 1:16, second gear 1:4 (Transmission)
Basic 6 channel 2.4Ghz radio
Basic 60T 540 motor
30 days limited warranty
This product is professionally pre-assembled
1/12 Scale Earth Digger 4200XL Hydraulic Excavator: http://goo.gl/aH2Akw
Earth Digger 4200 hydraulic excavator is the most power excavator available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to dig! Massive power through 350kV brushless system.
100% CNC machined aluminum (except track and hydraulic pump)
Custom 8 channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized steel hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel molded tracks (50mm width, 45 grade carbon steel)
Efficient under carriage with tracks
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (endless)
Powder coated in yellow
Massive brushless system (hydraulic)
125A brushless ESC with BEC
350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft)
Neodymium magnets
Belt/track is track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Digging force: 15kg/33pounds
Driving speed: 310 meter per hour
Scale: 1:12
Dig depth: 495mm/19.4inch
Height of cabin: 155mm/6.1inch
Length: 1.15meter/45inch
Width: 250mm/9.8inch
Height: 840mm/33inch
Deadweight: 20kg/44lbs
Operating oil pressure: 20Bar, 290psi
Manufactured by JDCustoms
By Stephen 2016-7-12 13:33
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
By King 2015-11-06 10:12