Low MOQ for 450WN Dredge Pump Supply to Canberra

Low MOQ for
 450WN Dredge Pump  Supply to Canberra

Short Description:

Product Introduction WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad. Features Overall structure performance well in marine use Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. Acco...


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for , , , We warmly welcome customers, business associations and friends from all over the world to contact us and seek cooperation for mutual benefits.
Low MOQ for 450WN Dredge Pump Supply to Canberra Detail:

Product Introduction

WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad.

Features

Overall structure performance well in marine use

Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. According to the connection type with the gear box, there are two kinds of typical structure, one is with independent support, the other is combined with gear box. The lubrication of pump with support is grease lubrication or thin oil lubrication. The double casing design can make the pump body safe even when the liner is worn out. Easy to disassemble and  maintenance: WN type dredging pump can be disassembled from front. This make the disassemble and maintenance easier.

Good performance of dredging

Good cavitation performance: WN type dredging pump have good cavitation performance which can ensure suction ability of pump. While it can achieve greater digging depth and higher suction concentration.

High flow capacity and wide applicability: WN type dredge pump impeller passage is very wide to continuous pumping gravel or high plastic clay and not happens jam. Good carrying ability of pump is guarantee for dredger performance.

Sharp Dropping performance curve: The flow and head curve falling steeply makes the mud pump having a stronger adaptability to the change of row spacing.

Achieving various blendings of pump performance: WN dredging pump can change the rotational speed and the diameter of the impeller, to achieve the different head of pump under the same flow.

Wear-resistant and long-life service wet parts

Wet parts of WN dredging pump , such as impeller, volute liner, throat bushing and frame plate liner insert(wearable liner) adopt alloy cast iron material whose hardness is not less than 58HRC. It has not only impact on resistance but also high anti-abrasion performance.

The service life of each part is fully considered in the process of product design. The same replacement cycle reduces the maintenance and replacement costs.

Small hydraulic loss, high efficiency, low power consumption: Due to the advanced hydraulic model, the dredging pump has high efficiency level. The efficiency of WN dredging pump is higher about 2-3 percentage points than imported. Thus, in the same production, it can achieve lower fuel consumption.

A reliable seal and no leakage

200WN-500WN dredge pump adopts mechanical seals or packing seals or combination of  mechanical and packing seals.

600WN(Q)-1000WN(Q) dredge pump adopts shaft seal with L-shaped screw shell rubber seal device which has three L-shaped seal rings and one shaft sleeve with special thread.

Technical Parameters

                                       Pump    Model
 Capacity Q (m3/h)
  Head   H  (m)      Speed   n   (r/min)          Eff.        (%)      NPSHr     (m)    Inlet     Diameter (mm)      Outlet       Diameter (mm)
Max.  Diameter of Flowd Particle  (mm)
200WNQ 600-800 20-40 700-900 60-65 <4.5 250 200 178
200WN 750-1000 40-65 700-850 70-72 <4 250 200 180
250WNQ 950-1100 20-40 500-700 65-70 <4 300 250 220
250WN 1100-1300 40-65 500-650 70-74 <4 350 250 144
300WNQ 1500-1800 20-40 400-600 65-68 <4 350 300 241
300WN 1800-2200 40-65 400-550 74-78 <4 450 300 241
350WN 2600-3000 40-65 400-550 74-78 <4.5 450 350 245
400WN 2800-3200 20-40 400-550 74-78 <4.5 450 400 250
450WN 3200-3850 40-67 350-500 76-80 <4.5 600 450 354
500WNQ 3600-4200 20-40 220-320 72-75 <4.8 600 500 330
500WN 4500-5500 30-72 350-450 78-80 <4.8 650 500 250
600WN 5000-9000 30-75 280-420 81-85 <6 660 600 220
700WN 8000-12000 30-76 280-380 83-85 <6 760 700 280
800WN 10000-15000 28-72 260-350 80-84 <6 900 800 300
900WN 12000-19000 25-75 220-330 85-87 <6 960 900 320
1000WN 16000-25000 23-76 181-290 85-87 <6 1200 1000 350

Product detail pictures:

Low MOQ for
 450WN Dredge Pump  Supply to Canberra detail pictures


The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for Low MOQ for 450WN Dredge Pump Supply to Canberra, The product will supply to all over the world, such as: Dubai , Northern Mariana Islands , Puerto Rico , With the highest standards of product quality and service, our products have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We are very pleased to serve customers from all over the world!


  • A 60,000 psi direct drive pump provides more actual cutting power than a 90,000 psi hydraulic intensifier with the same size motor. With the same abrasive flow, the direct drive pump cuts faster and at a lower cost.

    For more about OMAX, visit http://www.headland.com.au/machinery/fabrication-machinery/water-jet/



    power head filter is better then under gravel filter aquarium

    Power Head Filter ::

    powerhead is a device that looks like a little internal filter but has no filter material in it and initially you might think, ‘what use is this puny device to me?’ and discard it in disgust. But wait! A powerhead is actually quite useful in some tanks, and in others, it is almost essential.

    Let me set the scene for you. A four foot tank, running an external filter. It’s winter, so the ambient room temperature hovers around 18 degrees, and even lower sometimes. Far too cold for tropical fish. You have three heaters in the tank, but it never seems to get warmer than 22-23 degrees, no matter how high the heaters are set. What’s wrong?

    I’ll tell you what’s wrong. Regardless of how large your canister filter is, the flow is unlikely to create significant current in the tank. Water moves sluggishly, your heaters heat the water immediately around them, then switch off, creating a pool of warmth in one area of the tank and leaving the rest of it frigid.

    A powerhead will create a nice underwater current, keeping the water moving around your tank and causing your heaters to actually heat all the water. Not only that, but the current will give your fish something to swim against, which is appreciated by active river fish that otherwise will spend their lives wondering how they ended up in a small glass pond.

    Of course, some fish don’t like a great deal of current, but most fish robust enough to live in a large tank environment appreciate some current to frolic and play in, and more importantly, the flow of water means that your water maintains a homogeneous temperature throughout the tank without developing weird cold and hot spots that will confuse the fish and potentially make them ill.

    When Don’t I Need A Power Head?

    You don’t need a powerhead if your tank is already using an internal filter with sufficient flow (you’ll know if the flow is sufficient by placing a thermometer at the end of the tank away from the heater and seeing if it is at the same temperature as the water nearer the heater.)
    You don’t need a powerhead if your tank is under two feet. Probably.
    You don’t need a powerhead if your external filter provides strong enough outflow to create a substantial current. I use the Eheim series of canister filters, which work well in most respects but which have a rather gentle flow that creates very little current at all.

    Powerhead driven aquarium filters are common in the hobby. Several brands offer pumps with pre-made filter attachments for the powerhead. You can easily create your own and avoid having to buy a completely new unit. Here we show you how to make a custom DIY powerhead filter using a water bottle and some filter media. This simple and inexpensive project can transform an existing powerhead into an internal filter that provides adequate mechanical and biological filtration for your tank.

    All you need is some extra bio media of your choice, (bio balls, ceramic rings, etc.) and a few pieces of mechanical filter pad. The size of the filter attachment you make will depend on the size of your powerhead and the amount of filtration your tank requires. The 17 oz. bottle we use in this project should adequately filter a 20 gallon non-planted tank with reasonable fish load. Overall, making a DIY powerhead filter is a quick, adequate and often free way of filtering your tank.

    Under Gravel Filter ::

    Clean the aquarium. Before installing the undergravel filter, rinse out the tank with hot water to remove any chemicals from the manufacturing process.
    Rinse the gravel and aquarium furniture. …
    Assemble the filter kit. …
    Add the gravel and aquarium furniture. …
    Install an air bubbler. …
    Add the water.

    This easy-to-setup and easy-to-maintain Top Fin Undergravel Filter works to help cleanse aquarium water of harmful compounds and odors. Help ensure the safety of the water in your aquatic pet’s aquarium with the help of this highly effective filter, which works to remove harmful compounds and the causes of odors for clean aquarium water. This filter is easy to set up and easy to maintain.
    Features:

    Filters aquarium water to remove harmful compounds and odors to help keep your fish happy and healthy
    Easy set up and maintenance
    Includes cartridge, carbon canisters, spout, airline tubing, air stone, top tube, tube connector, bottom tube, base joint and panels
    1 year warranty
    Includes: 1 Filter
    Intended For: Aquariums
    Size: Available in small (for 10 to 20-gallon aquariums) and large (for 10 to 40 gallon aquariums)

    Subscribe My Channel :: https://www.youtube.com/channel/UCryeij_6WILbVGH_meYIKZg

    My Gmail Account :: lalmughal51@gmail.com

    My Contact Number :: 0344 – 1530559

    =====================FOLLOW ME====================

    -~-~~-~~~-~~-~-
    Please watch: “Fish Life Comments Series (Q And A) Urdu/Hindi”

    -~-~~-~~~-~~-~-

    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!




















    5 Stars By Jack 2016-2-14 16:32
    Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.






















    5 Stars By Edward 2016-2-27 17:52