Leading Manufacturer for DT Series FGD Pump to Bhutan Importers
Short Description:
Product Description Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump. The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pu...
Product Detail
Product Tags
Related Video
Feedback (2)
Leading Manufacturer for DT Series FGD Pump to Bhutan Importers Detail:
Product Description
Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump.
The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pump, recycling pump, sump pump and so on.
Structure Form
Series of DT FGD pump is a horizontal, single casing, single stage, single suction, pedestal or suspension structure pump.
1. Impeller 5. Frame plate liner insert 9. Coupling
2. Volute liner 6. Stuffing box 10. Base plate
3. Suction short pipe 7. Mechanical seal
4. Discharge short pipe 8. Frame
Series of LT FGD pump is vertical, single casing pump. Adding suction pipe can meet the requirements of various operating conditions.
1. Impeller 5. Left support plate 9. Coupling
2. Volute liner 6. Bearing housing 10. Discharge pipe
3. Frame plate liner insert 7. Motor support 11. Right support plate
4. Column 8.Motor 12. Suction pipe
Technical Parameters (DT)
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | Particle Max. Size Handled Occasionally (mm) | Pump Weight (kg) | ||||
Capacity Q | Head H (m) |
Speed n (r/min) | Max.Eff. (%) |
(NPSH)r (m) |
||||
(m3/h) | ||||||||
900DT-F110 | 1600 | 4907-14076 | 8.5-32.7 | 300-490 | 88.3 | 6.5 | 96 | 11800 |
800DT-A90 | 900 | 4104-10690 | 7.8-27.8 | 400-595 | 86.4 | 4.3 | 88 | 7101 |
700DT-A90 | 900 | 3551-8988 | 10.0-33.8 | 400-595 | 86.7 | 5.6 | 68 | 6030 |
700DT-A83 | 630 | 2677-6491 | 8.7-30.2 | 400-595 | 85.9 | 6.0 | 70 | 6002 |
700DT-B78 | 560 | 3378-7200 | 10.0-21.8 | 400-595 | 84.7 | 4.3 | 65 | 5136 |
600DT-A82 | 500 | 1664-5600 | 5.2-27.8 | 300-595 | 88.3 | 2.2 | 152 | 4900 |
500DT-A76 | 400 | 1555-3881 | 9.9-27.9 | 450-595 | 76.8 | 4.5 | 58 | 3512 |
500DT-A70 | 500 | 1908-4399 | 9.3-32.5 | 490-742 | 76.0 | 6 | 55 | 3100 |
400DT-A65 | 400 | 1134-3330 | 8.8-31.1 | 490-472 | 80.1 | 5.2 | 60 | 3200 |
350DT-A78 | 500 | 720-2865 | 11.6-51.1 | 400-720 | 78.0 | 3.5 | 104 | 3700 |
300DT-A60 | 400 | 574-2384 | 8.7-52.0 | 490-989 | 81.1 | 4.3 | 96 | 2790 |
250DT-A75 | 560 | 300-1480 | 20.8-97.5 | 490-980 | 77.5 | 3.0 | 72 | 3191 |
250DT-A45 | 90 | 221-804 | 5.0-27.0 | 490-980 | 68.2 | 6.5 | 56 | 1321 |
200DT-B45 | 90 | 136-639 | 5.5-30.1 | 490-990 | 80.8 | 2.0 | 51 | 1750 |
150DT-A60 | 450 | 156-704 | 28.9-150.0 | 700-1480 | 70.7 | 2.1 | 39 | 1657 |
150DT-B55 | 132 | 139-630 | 11.3-53.7 | 490-990 | 78.1 | 2.3 | 56 | 1540 |
150DT-A50 | 90 | 62-279 | 9.3-44.6 | 490-980 | 65.7 | 2.1 | 30 | 1470 |
150DT-A40 | 132 | 122-503 | 11.2-61.2 | 700-1490 | 73.1 | 2.6 | 40 | 830 |
100DT-A60 | 220 | 71-305 | 29.1-147.0 | 700-1480 | 57.9 | 2.4 | 18 | 890 |
100DT-A50 | 160 | 85-360 | 20.5-100.2 | 700-1480 | 69.6 | 2.5 | 34 | 975 |
100DT-A45 | 90 | 47-228 | 14.8-83.5 | 700-1480 | 58.7 | 2.2 | 22 | 810 |
100DT-A40 | 75 | 61-268 | 12.0-61.0 | 700-1480 | 70.4 | 1.7 | 29 | 620 |
100DT-A35 | 75 | 77-323 | 8.8-45.9 | 700-1480 | 73.2 | 1.9 | 42 | 550 |
80DT-A36 | 37 | 41-167 | 8.9-47.1 | 700-1480 | 62.4 | 1.5 | 16 | 480 |
65DT-A40 | 55 | 34-159 | 11.5-60.1 | 700-1480 | 62.1 | 2.1 | 16 | 490 |
65DT-A30 | 22 | 21-99 | 7.0-35.6 | 700-1470 | 54.6 | 2.2 | 19 | 260 |
50DT-A50 | 90 | 27-111 | 22.3-110.7 | 700-1480 | 45.1 | 3 | 13 | 856 |
50DT-A45 | 55 | 21.6-93.6 | 15.2-81.0 | 700-1480 | 48.4 | 3.6 | 9.5 | 849 |
50DT-B40 | 37 | 24.5-99.5 | 12.0-60.7 | 700-1470 | 55.0 | 3.1 | 14 | 490 |
50DT-A30 | 18.5 | 16-78 | 5.8-35.1 | 700-1460 | 48.5 | 0.8 | 16 | 210 |
40DT-A25 | 45 | 16.8-74.7 | 13.7-88.6 | 1400-2950 | 42.5 | 2.6 | 9 | 185 |
40DT-B20 | 15 | 7.9-37.1 | 10.7-57.5 | 1400-2930 | 53.0 | 0.9 | 7 | 160 |
40DT-A19 | 15 | 7.8-34.9 | 12.3-57.1 | 1400-2930 | 58.8 | 1.2 | 11 | 173 |
40DT-A17 | 7.5 | 4.6-23.4 | 9.2-44.6 | 1400-2900 | 52.4 | 2.5 | 11 | 127 |
25DT-A25 | 4 | 4.7-19.9 | 3.3-21.6 | 700-1400 | 38.0 | 3.3 | 5 | 107 |
25DT-A15 | 5.5 | 4.4-19.3 | 6.2-34.4 | 1390-2900 | 41.8 | 1.3 | 8 | 89 |
Note:1.(NPSH)r:Value of the second speed. 2.Normal partical size: 56% of allowable occasional particle Max. size. |
Applicable Condition
PH value: 2.5~13
Chloride ion concentration: ≤60000ppm
Concentration weight: ≤60%
Medium temperature: ≤120℃
Performance and material characteristics
- High efficiency, long service life and reliable operation.
- The wet parts are made of low carbon stainless steel material.
- Low carbon stainless steel mainly consisting of ferritic has excellent resistance to chloride stress corrosion cracking and higher mechanical strength.
- Less hydraulic friction, the efficiency is higher than the same parameters of the metal pump about 3%.
- Metal pump is easy to control the geometric dimension and high volume efficiency. The pump parts is with high surface and small clearance. The overall efficiency of 5% higher than non-metal pump.
- The wet parts has long-service life and long-term shear wear ability. Shear sliding wear ability of metal protective plate is stronger than that of the common non-metallic materials.
- Dynamic abrasion resistance is 0.008-0.08mm every year, with high tensile strength. The pump performance can be maintained constant in the long-term abrasion conditions
Seal Type
All seal type adopt mechanical seal, divided into a water and anhydrous type.
Water type
Double face mechanical seal with double sets of friction pairs, reliable operation, can achieve the effect of liquid leakage.
Anhydrous type
The self washing mechanical seal with no water medium has the advantages of unique structure, high operation reliability and good water saving effect.
Product detail pictures:
To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for Leading Manufacturer for DT Series FGD Pump to Bhutan Importers, The product will supply to all over the world, such as: Denver, Plymouth, Cannes, We hope we can establish long-term cooperation with all of the customers. And hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need!
KARCHER AMAZON LINK: https://amzn.to/2tB7TmU
Check out my review of the new Karcher X-Series K5.740 electric pressure washer. This is a 2000 psi washer that can handle the cleanup around the house. Since it’s electric, it’s relatively quiet compared to gas units. and doesn’t run when the trigger isn’t pulled. Thanks for checking out my video, please comment and subscribe!
OTHER SOCIALS:
https://twitter.com/MarkHomeExpert
https://instagram.com/markthomas123/
By Sophia 2016-11-15 13:07
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Caroline 2015-11-26 14:48