Cheapest Factory 450WN Dredge Pump for Las Vegas Factory
Short Description:
Product Introduction WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad. Features Overall structure performance well in marine use Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. Acco...
Product Detail
Product Tags
Related Video
Feedback (2)
Cheapest Factory 450WN Dredge Pump for Las Vegas Factory Detail:
Product Introduction
WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad.
Features
Overall structure performance well in marine use
Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. According to the connection type with the gear box, there are two kinds of typical structure, one is with independent support, the other is combined with gear box. The lubrication of pump with support is grease lubrication or thin oil lubrication. The double casing design can make the pump body safe even when the liner is worn out. Easy to disassemble and maintenance: WN type dredging pump can be disassembled from front. This make the disassemble and maintenance easier.
Good performance of dredging
Good cavitation performance: WN type dredging pump have good cavitation performance which can ensure suction ability of pump. While it can achieve greater digging depth and higher suction concentration.
High flow capacity and wide applicability: WN type dredge pump impeller passage is very wide to continuous pumping gravel or high plastic clay and not happens jam. Good carrying ability of pump is guarantee for dredger performance.
Sharp Dropping performance curve: The flow and head curve falling steeply makes the mud pump having a stronger adaptability to the change of row spacing.
Achieving various blendings of pump performance: WN dredging pump can change the rotational speed and the diameter of the impeller, to achieve the different head of pump under the same flow.
Wear-resistant and long-life service wet parts
Wet parts of WN dredging pump , such as impeller, volute liner, throat bushing and frame plate liner insert(wearable liner) adopt alloy cast iron material whose hardness is not less than 58HRC. It has not only impact on resistance but also high anti-abrasion performance.
The service life of each part is fully considered in the process of product design. The same replacement cycle reduces the maintenance and replacement costs.
Small hydraulic loss, high efficiency, low power consumption: Due to the advanced hydraulic model, the dredging pump has high efficiency level. The efficiency of WN dredging pump is higher about 2-3 percentage points than imported. Thus, in the same production, it can achieve lower fuel consumption.
A reliable seal and no leakage
200WN-500WN dredge pump adopts mechanical seals or packing seals or combination of mechanical and packing seals.
600WN(Q)-1000WN(Q) dredge pump adopts shaft seal with L-shaped screw shell rubber seal device which has three L-shaped seal rings and one shaft sleeve with special thread.
Technical Parameters
Pump Model | Capacity Q
(m3/h) |
Head H (m) | Speed n
(r/min) |
Eff. (%) | NPSHr (m) | Inlet Diameter
(mm) |
Outlet Diameter
(mm) |
Max. Diameter of
Flowd Particle (mm) |
200WNQ | 600-800 | 20-40 | 700-900 | 60-65 | <4.5 | 250 | 200 | 178 |
200WN | 750-1000 | 40-65 | 700-850 | 70-72 | <4 | 250 | 200 | 180 |
250WNQ | 950-1100 | 20-40 | 500-700 | 65-70 | <4 | 300 | 250 | 220 |
250WN | 1100-1300 | 40-65 | 500-650 | 70-74 | <4 | 350 | 250 | 144 |
300WNQ | 1500-1800 | 20-40 | 400-600 | 65-68 | <4 | 350 | 300 | 241 |
300WN | 1800-2200 | 40-65 | 400-550 | 74-78 | <4 | 450 | 300 | 241 |
350WN | 2600-3000 | 40-65 | 400-550 | 74-78 | <4.5 | 450 | 350 | 245 |
400WN | 2800-3200 | 20-40 | 400-550 | 74-78 | <4.5 | 450 | 400 | 250 |
450WN | 3200-3850 | 40-67 | 350-500 | 76-80 | <4.5 | 600 | 450 | 354 |
500WNQ | 3600-4200 | 20-40 | 220-320 | 72-75 | <4.8 | 600 | 500 | 330 |
500WN | 4500-5500 | 30-72 | 350-450 | 78-80 | <4.8 | 650 | 500 | 250 |
600WN | 5000-9000 | 30-75 | 280-420 | 81-85 | <6 | 660 | 600 | 220 |
700WN | 8000-12000 | 30-76 | 280-380 | 83-85 | <6 | 760 | 700 | 280 |
800WN | 10000-15000 | 28-72 | 260-350 | 80-84 | <6 | 900 | 800 | 300 |
900WN | 12000-19000 | 25-75 | 220-330 | 85-87 | <6 | 960 | 900 | 320 |
1000WN | 16000-25000 | 23-76 | 181-290 | 85-87 | <6 | 1200 | 1000 | 350 |
Product detail pictures:
In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of Cheapest Factory 450WN Dredge Pump for Las Vegas Factory, The product will supply to all over the world, such as: Ecuador, Karachi, Iceland, "Good quality and reasonable price" are our business principles. If you are interested in our products or have any questions, please feel free to contact us. We hope to establish cooperative relationships with you in the near future.
Company Overview with focus on the mining industry – video from Bering Sea Gold
https://www.hydroforcepumps.com/
The HydroForce™ Series 3 Pump is a submersible clean water pump designed for rainwater tanks – electronically controlled, pressure sensitive, centrifugal roto-dynamic with no reciprocating parts.
The pump features a built-in non-return valve and double dry-run protection. For location underwater in a tank or surface mounted this is a British engineered and manufacturep innovation. HydroForce™ Rainwater Harvesting Pump has been engineered by HydroForce Pumps Ltd in Peterborough, England to respond to the demand for the highest quality pump for use under water in rainwater harvesting tanks. Using the most rugged components it has been exhaustively tested for trouble-free running.
This powerful pump features a self-controlling pressure switch, dry run protection and a non-return valve. It is suitable for total immersion in tank water or it can be externally connected to the tank above ground. Learn more about the latest pump from HydroForce Pumps Ltd.
Please comment and one of our representatives will reply as soon as possible.
For more information:
Visit us: https://www.rainwaterharvesting.co.uk/
Tweet us: https://twitter.com/@watersavings
By Julia 2016-11-16 17:16
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Christian 2016-5-15 15:15