Factory Supplier for 700WN Dredge Pump to Czech Factories
Short Description:
Product Introduction WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad. Features Overall structure performance well in marine use Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. Acco...
Product Detail
Product Tags
Related Video
Feedback (2)
Factory Supplier for 700WN Dredge Pump to Czech Factories Detail:
Product Introduction
WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad.
Features
Overall structure performance well in marine use
Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. According to the connection type with the gear box, there are two kinds of typical structure, one is with independent support, the other is combined with gear box. The lubrication of pump with support is grease lubrication or thin oil lubrication. The double casing design can make the pump body safe even when the liner is worn out. Easy to disassemble and maintenance: WN type dredging pump can be disassembled from front. This make the disassemble and maintenance easier.
Good performance of dredging
Good cavitation performance: WN type dredging pump have good cavitation performance which can ensure suction ability of pump. While it can achieve greater digging depth and higher suction concentration.
High flow capacity and wide applicability: WN type dredge pump impeller passage is very wide to continuous pumping gravel or high plastic clay and not happens jam. Good carrying ability of pump is guarantee for dredger performance.
Sharp Dropping performance curve: The flow and head curve falling steeply makes the mud pump having a stronger adaptability to the change of row spacing.
Achieving various blendings of pump performance: WN dredging pump can change the rotational speed and the diameter of the impeller, to achieve the different head of pump under the same flow.
Wear-resistant and long-life service wet parts
Wet parts of WN dredging pump , such as impeller, volute liner, throat bushing and frame plate liner insert(wearable liner) adopt alloy cast iron material whose hardness is not less than 58HRC. It has not only impact on resistance but also high anti-abrasion performance.
The service life of each part is fully considered in the process of product design. The same replacement cycle reduces the maintenance and replacement costs.
Small hydraulic loss, high efficiency, low power consumption: Due to the advanced hydraulic model, the dredging pump has high efficiency level. The efficiency of WN dredging pump is higher about 2-3 percentage points than imported. Thus, in the same production, it can achieve lower fuel consumption.
A reliable seal and no leakage
200WN-500WN dredge pump adopts mechanical seals or packing seals or combination of mechanical and packing seals.
600WN(Q)-1000WN(Q) dredge pump adopts shaft seal with L-shaped screw shell rubber seal device which has three L-shaped seal rings and one shaft sleeve with special thread.
Technical Parameters
Pump Model |
Capacity Q (m3/h) | Head H (m) | Speed n (r/min) | Eff. (%) | NPSHrn (m) |
Inlet Diameter (mm) | Outlet Diameter (mm) | Max. Diameter of Flowd Particle (mm) |
|
200WNQ | 600-800 | 20-40 | 700-900 | 60-65 | <4.5 | 250 | 200 | 178 | |
200WN | 750-1000 | 40-65 | 700-850 | 70-72 | <4 | 250 | 200 | 180 | |
250WNQ | 950-1100 | 20-40 | 500-700 | 65-70 | <4 | 300 | 250 | 220 | |
250WN | 1100-1300 | 40-65 | 500-650 | 70-74 | <4 | 350 | 250 | 144 | |
300WNQ | 1500-1800 | 20-40 | 400-600 | 65-68 | <4 | 350 | 300 | 241 | |
300WN | 1800-2200 | 40-65 | 400-550 | 74-78 | <4 | 450 | 300 | 241 | |
350WN | 2600-3000 | 40-65 | 400-550 | 74-78 | <4.5 | 450 | 350 | 245 | |
400WN | 2800-3200 | 20-40 | 400-550 | 74-78 | <4.5 | 450 | 400 | 250 | |
450WN | 3200-3850 | 40-67 | 350-500 | 76-80 | <4.5 | 600 | 450 | 354 | |
500WNQ | 3600-4200 | 20-40 | 220-320 | 72-75 | <4.8 | 600 | 500 | 330 | |
500WN | 4500-5500 | 30-72 | 350-450 | 78-80 | <4.8 | 650 | 500 | 250 | |
600WN | 5000-9000 | 30-75 | 280-420 | 81-85 | <6 | 660 | 600 | 220 | |
700WN | 8000-12000 | 30-76 | 280-380 | 83-85 | <6 | 760 | 700 | 280 | |
800WN | 10000-15000 | 28-72 | 260-350 | 80-84 | <6 | 900 | 800 | 300 | |
900WN | 12000-19000 | 25-75 | 220-330 | 85-87 | <6 | 960 | 900 | 320 | |
1000WN | 16000-25000 | 23-76 | 181-290 | 85-87 | <6 | 1200 | 1000 | 350 |
Product detail pictures:
We take pleasure in an extremely fantastic standing among the our prospects for our great product top quality, competitive cost and the finest support for Factory Supplier for 700WN Dredge Pump to Czech Factories, The product will supply to all over the world, such as: Namibia, belarus, Australia, Looking forward, we will keep pace with the times, continuing to create new products. With our strong research team, advanced production facilities, scientific management and top services, we will supply high quality products to our customers worldwide. We sincerely invite you to be our business partners for mutual benefits.
https://www.amazon.co.uk/gp/product/B00915MIFU?tag=beggshoesdoel-21
Revolutionary Magnetically Levitated Centrifugal Pump
Levitronix® has developed a revolutionary centrifugal pump that has no bearings to wear out or seals to break. Based on the principles of magnetic levitation, the pump’s impeller is suspended contact-free inside a sealed casing and is driven by the magnetic field of the motor.
The impeller and casing are both fabricated from chemical resistant, high-purity fluorocarbon resins. Together with the rotor magnet they make up the pump head. Fluid flow rate and pressure are precisely controlled by electronically regulating rotor speed and eliminates pulsations.
By eliminating a mechanical bearing, no mechanical friction occurs that could cause local hotspots. Moreover, no narrow gaps exist where metal other particles could precipitate. The low-shear, dead-zone-free pump design and the smooth, wetted plastic surfaces further aid in avoiding deposition in the pump.
By Jack 2016-2-14 16:32
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Judy 2016-7-26 18:36