11 Years Manufacturer L Metal Light Duty Slurry Pump to New Zealand Factories
Short Description:
Introduction Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal. Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine partic...
Product Detail
Product Tags
Related Video
Feedback (2)
11 Years Manufacturer L Metal Light Duty Slurry Pump to New Zealand Factories Detail:
Introduction
Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal.
Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine particle size and weight concentration not more than 30%. The liner and impeller of this pump can be changeable ,eight with anti-abrasive metal or rubber material.
Advantages
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Type Notation
Technical Parameters
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) |
Max.Eff. (%) |
NPSH (m) |
Impeller. Dia. (mm) | |||
m3/h | l/s | |||||||
20A – L | 7.5 | 2.34-10.8 | 0.65-3 | 6-37 | 1400-3000 | 40 | 2.5-3 | 152.4 |
50B – L | 15 | 11.5-76 | 3.2-21.1 | 8.5-46 | 1400-2800 | 62 | 2.5-5.5 | 190 |
75C – L | 30 | 18-151 | 5-42 | 4-46.4 | 900-2400 | 57 | 3-6 | 229 |
100D – L | 60 | 46.8-324 | 13-90 | 7-48.3 | 800-1800 | 64 | 2-6 | 305 |
150E – L | 120 | 115-568.8 | 32-158 | 10.5-51.8 | 800-1500 | 60 | 2.5-6 | 381 |
200E – L | 120 | 234-910 | 65-235 | 9.5-40 | 600-1100 | 64 | 3-6 | 457 |
250E – L | 120 | 396-1425 | 110-396 | 8–30 | 500-800 | 77 | 2-10 | 550 |
300S – L | 560 | 468-2538 | 130-708 | 8-60 | 400-950 | 79 | 2-10 | 653 |
350S – L | 560 | 650-2800 | 180-780 | 10-59 | 400-840 | 81 | 3-10 | 736 |
400ST – L | 560 | 756-3312 | 210-920 | 7-37.5 | 300-600 | 85 | 2-8 | 825 |
450ST – L | 560 | 1080-4356 | 300-1210 | 9-40 | 300-550 | 87 | 3-10 | 933 |
550TU – L | 1200 | 1980-7920 | 560-2200 | 10-50 | 250-475 | 86 | 4-10 | 1213 |
650TU – L | 1200 | 2520-9108 | 700-2530 | 10-55 | 200-350 | 86 | 2-8 | 1425 |
50B – L(R) | 15 | 9-61 | 2.5-17 | 3-32.4 | 1200-2600 | 48 | 2.75-4.5 | 190 |
75C – L(R) | 30 | 28.8-154.8 | 8-43 | 9-43 | 1100-2300 | 60 | 3-5 | 229 |
100D – L(R) | 60 | 54-288 | 15-80 | 12-38 | 800-1600 | 65 | 2.5-5.5 | 305 |
150E – L(R) | 120 | 72-576 | 20-160 | 4-38 | 800-1300 | 65 | 2.5-5.5 | 381 |
250E – L(R) | 120 | 396-1425 | 110-396 | 8-30 | 500-800 | 77 | 2-10 | 550 |
300S – L(R) | 560 | 432-1900 | 120-528 | 7-41 | 400-800 | 81 | 3-8 | 653 |
350S – L(R) | 560 | 720-2844 | 200-790 | 10-41 | 400-700 | 86 | 3-7 | 736 |
400ST – L(R) | 560 | 720-3312 | 200-920 | 7-51 | 300-700 | 80 | 2-10 | 825 |
450ST – L(R) | 560 | 1008-4356 | 280-1210 | 9-48 | 300-600 | 80 | 2-9 | 933 |
550TU – L(R) | 1200 | 1980-7920 | 560-2200 | 10-50 | 250-475 | 86 | 4-10 | 1213 |
650TU – L(R) | 1200 | 2520-9108 | 700-2530 | 10-39 | 200-350 | 86 | 2-8 | 1425 |
Remark: 1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed |
Selection Chart
Application
L(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
Good quality comes to start with; service is foremost; organization is cooperation" is our enterprise philosophy which is regularly observed and pursued by our firm for 11 Years Manufacturer L Metal Light Duty Slurry Pump to New Zealand Factories, The product will supply to all over the world, such as: Ecuador, Panama, Milan, Our company has abundant strength and possesses a steady and perfect sales network system. We wish we could establish sound business relationships with all customers from at home and abroad on the basis of mutual benefits.
Sludge Suction Device is used to pump out water, sludge, liquid from tank, reactors etc.
It is connected to a pressure washer and submerged inside tank/reactor. Efficiency of the device depend upon the capacity of the pressure washer.
Here’s a ShurFlo model 2088 that I’m using as a maple sap vacuum pump. This setup produces about 1 more gallon of sap per tap than a similar setup I have without a vacuum pump. It produces about 15-20″ of vacuum on the lines.
By Janet 2015-10-31 13:33
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Ray 2015-10-15 14:15