Hot Selling for L Metal Light Duty Slurry Pump to Hongkong Factory
Introduction Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal. Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine partic...
Hot Selling for L Metal Light Duty Slurry Pump to Hongkong Factory Detail:
Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal.
Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine particle size and weight concentration not more than 30%. The liner and impeller of this pump can be changeable ,eight with anti-abrasive metal or rubber material.
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Max. Power (kw)
|Clear Water Performance|
|Impeller. Dia. (mm)|
|20A – L||7.5||2.34-10.8||0.65-3||6-37||1400-3000||40||2.5-3||152.4|
|50B – L||15||11.5-76||3.2-21.1||8.5-46||1400-2800||62||2.5-5.5||190|
|75C – L||30||18-151||5-42||4-46.4||900-2400||57||3-6||229|
|100D – L||60||46.8-324||13-90||7-48.3||800-1800||64||2-6||305|
|150E – L||120||115-568.8||32-158||10.5-51.8||800-1500||60||2.5-6||381|
|200E – L||120||234-910||65-235||9.5-40||600-1100||64||3-6||457|
|250E – L||120||396-1425||110-396||8–30||500-800||77||2-10||550|
|300S – L||560||468-2538||130-708||8-60||400-950||79||2-10||653|
|350S – L||560||650-2800||180-780||10-59||400-840||81||3-10||736|
|400ST – L||560||756-3312||210-920||7-37.5||300-600||85||2-8||825|
|450ST – L||560||1080-4356||300-1210||9-40||300-550||87||3-10||933|
|550TU – L||1200||1980-7920||560-2200||10-50||250-475||86||4-10||1213|
|650TU – L||1200||2520-9108||700-2530||10-55||200-350||86||2-8||1425|
|50B – L(R)||15||9-61||2.5-17||3-32.4||1200-2600||48||2.75-4.5||190|
|75C – L(R)||30||28.8-154.8||8-43||9-43||1100-2300||60||3-5||229|
|100D – L(R)||60||54-288||15-80||12-38||800-1600||65||2.5-5.5||305|
|150E – L(R)||120||72-576||20-160||4-38||800-1300||65||2.5-5.5||381|
|250E – L(R)||120||396-1425||110-396||8-30||500-800||77||2-10||550|
|300S – L(R)||560||432-1900||120-528||7-41||400-800||81||3-8||653|
|350S – L(R)||560||720-2844||200-790||10-41||400-700||86||3-7||736|
|400ST – L(R)||560||720-3312||200-920||7-51||300-700||80||2-10||825|
|450ST – L(R)||560||1008-4356||280-1210||9-48||300-600||80||2-9||933|
|550TU – L(R)||1200||1980-7920||560-2200||10-50||250-475||86||4-10||1213|
|650TU – L(R)||1200||2520-9108||700-2530||10-39||200-350||86||2-8||1425|
1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point).
2. NPSH: appropriate to point Q recommended at highest speed
L(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for Hot Selling for L Metal Light Duty Slurry Pump to Hongkong Factory, The product will supply to all over the world, such as: Brazil , Kenya , Madagascar , Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.
I built this tiled roof hut in the bush using only primitive tools and materials. The tools I used have been made in my previous videos. It should be pointed out that I do not live in the wild and that this is just a hobby. It should be obvious to most that this is not a survival shelter but an experiment in primitive building technology.
To cut and carve wood I used the celt stone axe and stone chisel made in this video. To carry water and make fire I used pots and fire sticks made in this video. Finally, to store fire wood and dry, unfired tiles, I used the wood shed built in this video.
The wooden frame was built with a 2X2m floor plan and a 2m tall ridge line with 1m tall side walls. 6 posts were put into the ground 0.25 m deep. The 3 horizontal roof beams were attached to these using mortise and tenon joints carved with a stone chisel. The rest of the frame was lashed together with lawyer cane strips. The frame swayed a little when pushed so later triangular bracing was added to stop this. Also when the mud wall was built, it enveloped the posts and stopped them moving altogether.
A small kiln was built of mud from the ground and a perforated floor of clay from the creek bank. It was only 25 cm internal diameter and 50 cm tall. Clay was dug, broken tiles (from previous batches) were crushed and added to it as grog and it was mixed thoroughly.This clay was pressed into rectangular moulds made from strips of lawyer cane to form tiles. Wood ash prevented the clay sticking to the stone. 20 tiles were fired at a time. 450 flat tiles and 15 curved ridge tiles were made with only a few breakages. 26 firings were done in all and the average firing took about 4 hours. The fired tiles were then hooked over the horizontal roof battens.
An underfloor heating system was built into one side of the hut to act as a sitting/sleeping platform in cold weather. This was inspired by the Korean Ondol or “hot stone”. A trench was dug and covered with flat stones with a firebox at one end and a chimney at the other for draft. The flames travelled beneath the floor heating it. After firing it for a while the stones stay warm all night with heat conducted directly to the sleeping occupant and radiating into the room.
The wall was made of clayey mud and stone. A stone footing was laid down and over this a wall of mud was built. To save on mud, stones were included into later wall courses. The mud was dug from a pit in front of the hut and left a large hole with a volume of about 2.5 cubic metres.
The finished hut has a swinging door made of sticks. The inside is dark so I made a torch from tree resin. A broken tile with resin on it acts as a small lamp producing a lot of light and little smoke. The end product was a solid little hut, that should be fire and rot resistant. The whole project took 102 days but would have taken 66 days were it not for unseasonal rain. For a more in depth description see my blog (https://primitivetechnology.wordpress.com/).
Patreon page: https://www.patreon.com/user?u=2945881&ty=h
I have no face book page. Beware of fake pages.
Been having these fine bubbles in my tank for a few weeks now, and foam on top of the water. Dunno why.
By Anna 2016-4-30 14:39
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By David 2015-12-13 16:53