Hot-selling attractive ZGB High Performance Slurry Pump Export to Malaysia
Introduction In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main ...
Hot-selling attractive ZGB High Performance Slurry Pump Export to Malaysia Detail:
In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main technical features are as follows,
CAD modern design , super hydraulic performance, high efficiency and lower abrasive rate;
Wide passage, non-clogging and good performance of NPSH;
Expeller seal combined with packing seal and mechanical seal have be adopted to guarantee the slurry from leakage;
Reliability design ensures long MTBF (mean time between events);
The metric bearing with oil lubrication, reasonable lubrication and cooling systems ensure the bearing to be operated under the low temperature;
The materials of wet parts have the good performance of anti-wearing and anti-corrosion.
The pump can be used for seawater ash-removing to prevent it from the corrosion of seawater, salt and mist, and electrochemical corrosion;
The pump can be operated in series with multi-stage within permissible pressure.
The permissible maximum working pressure is 3.6MPa.
The series of pump has the advantages of reasonable construction, high efficiency, reliable operation and easy maintenance. It can be widely used for handling the mixture contained of abrasive and corrosive solids in electric power, metallurgy, mine, coal, constructional material and chemical industry departments, especial for removing ash and sludge in electric power station.
1. The series ZGB(P) slurry pump is of horizontal, single-stage, single-suction, cantilever, double-casing, centrifugal slurry pump. The pump rotates in clockwise viewed from the drive end.
2. The wet parts of ZGB and ZGBP pump at the same outlet diameter can be interchangeable. Their outline installation dimensions are one and the same. For the drive part of the series ZGB(P) slurry pump, the horizontal split frame with oil lubrication and two sets of water cooling systems inside and outside has been adopted. If necessary, cooling water can be supplied. The prepared joint for cooling water and the pressure of the cooling water can be seen in table 1.
3. Two kinds of shaft seal—expeller seal combined with packing and mechanical seal have been used for series ZGB(P) slurry pump.
4. The mechanical seal supplied with high pressure sealing water is recommended when the slurry pump is operated in series(two stages and above two stages), and the expeller seal combined with packing is used in single-stage pump.
|Pump Model||Speed n(r/min)||Capacity Q (l/s)||Head H (m)||Max.Eff.
|Shaft Power (kw)||Impeller Dia (mm)||Pump Weight (kg)||Outlet Dia./Inlet Dia. (mm)
|65ZGB||1480||31.7-15.8||58-61||62.5-47.4||4.5-3.0||28.8-19.9||390||1850||65 / 80|
|80ZGB||980||56.7-28.3||87.5-91.6||66.1-48.7||5.2-2.7||73.7-52.2||485||2500||80 / 100|
|100ZGB||1480||116.7-58.3||85.1-91.8||77.9-57.4||6.0-2.6||124.9-91.4||500||3000||100 / 152|
|150ZGB||980||200-100||85.2-90.0||77.7-53.3||3.8-2.7||215.0-165.5||740||3450||150 / 200|
|200ZGB||980||300.0-150.0||89.0-94.2||76.3-63.2||6.7-2.7||342.9-219.1||740||4000||200 / 250|
|250ZGB||980||400.0-200.0||84.0-90.1||78.2-63.2||7.3-3.3||421.2-275.6||740||4500||250 / 300|
|300ZGB||980||533.3-266.7||84.3-93.4||81.2-68.3||6.9-3.5||542.8-357.6||760||5500||300 / 350|
The water pressure and amount of all kinds of the shaft seal is as follows
Sealing water pressure
For single-stage pump with the expeller seal combined with packing, the water pressure of the shaft seal is 0.2-0.3MPa.
For multi-stage(two and above two stages) in series operation with the expeller seal combined with packing, the sealing water pressure should be:
The lowest sealing water pressure of n stage
Pn= Hi+0.7Hn;Hi is i stage pump head；Hn is n stage pump head.
For mechanical seal, the sealing water pressure of each stage of pump is higher 0.1MPa than pump discharge pressure.
Sealing water pressure(see table 1)
Product detail pictures:
We've been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Hot-selling attractive ZGB High Performance Slurry Pump Export to Malaysia, The product will supply to all over the world, such as: Greek , Ecuador , Senegal , We have a dedicated and aggressive sales team, and many branches, catering to our main customers. We are looking for long-term business partnerships, and ensure our suppliers that they will definitely benefit in both short and long run.
Automatic Liquid vertical Packing Machine For Honey With Piston Pump VFFS Pack Equipment
The machine can complete the whole actions like bag-making,measuring,filling,cutting and finished production output.
Sealing form is back sealing (pillow type),the up and below sealing size can make as customer’s request.
Microcomputer intelligent control, LCD display with English menu, friendly interface, automatic measurement of bag length,with last working state memory, fault display. Key part of the computer use induction method, completely sealed, waterproof, anti-corrosion, anti-dust, life for decades!!
Auto display the packing speed,the customer can use the auto cutting device according to there request,the cutting quantity is optional from 0~99pcs.
Can set the photo sensor, if there is no material at the hopper or ending of packing film,the machine will stop automatically, thus can avoid to waste the packing film.
1.The horizontal sealing guiding shaft of machine is processed by special refining bearing steel.super water-resistant,high precision,low noise and easy to maintain.
2.All parts contact with packaging materials are made of stainless steel, sanitary pollution.
3.Advanced control circuit design for vibrating material-feeding, the vibration force size (from 0 – 9 file) is adjustable. Noise is significantly less than ordinary models. and the Material feeding is even better.
Suitable packing material:
PET/AL/PE, PET/PP, BOPP Film, Nylon compound film and other materials can be heat sealed.
Production capacity:30-80 bags/min
Making bag size-L:30-180mm, W: 30-140mm
Sealing type:Pillow (back) seal,3/4 sides seal
Total Power:1.6 KW
Voltage:AC220V , 50/60Hz
Machine dimension:600*800*2000mm（packing machine)
YQ Machinery Co.,Ltd,established in 1999, has been devoted to packer machine manufacture. Through years of industrious effort on technical research and quality promotion, YQ Machinery have become a professional packer machinery manufacturer and distributor in Asia.
YQ Machinery has always been the best quality, excellent service waiting for all friends to visit us and sincere cooperation, join hands to create brilliant.
Quality: adhere to the scientific and technological innovation, select brand strategy, provide quality products, implement first-class service.
For more information about various high quality machinery,please email via email@example.com or browse our YQ Machinery Channal at https://www.youtube.com/user/chinesepacker
Lick us on website:http://www.chinesepacker.com
Skype us by :zhang.tracy6
Call us via:0086-13262514660
By Antonio 2016-9-15 12:57
Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
By Catherine 2016-7-13 16:09