High reputation for TL(R)Series FGD Pump Supply to Sevilla

High reputation for
 TL(R)Series FGD Pump  Supply to Sevilla

Short Description:

Introduction Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD. Samples 600X-TLR: The diameter of discharge: 600mm. bearing lubr...


Product Detail

Product Tags

Related Video

Feedback (2)

we are able to supply top quality items, aggressive price and greatest buyer assistance. Our destination is "You come here with difficulty and we offer you a smile to take away" for , , , Our intention should be to assist customers comprehend their goals. We have been creating terrific endeavours to obtain this win-win circumstance and sincerely welcome you to definitely join us!
High reputation for TL(R)Series FGD Pump Supply to Sevilla Detail:

Introduction

Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD.

Samples

600X-TLR: The diameter of discharge: 600mm. bearing lubricating type: thin oil, rubber liner.

700X-TL: The diameter of discharge:700mm, bearing lubricating type: thin oil, metal liner.

Features

  1. CFD flowing simulating analysis technology is adopted on wetted parts of pump, it has a reliable property and high operational efficiency.
  2. To adjust bearing assembly can change impeller position in volute, it can keep pump unit in a state of high efficient operation.
  3. The pump is back pull-out construction, it has easy construction and simplifies maintenance. It can be disassembled without dismantling suction & discharge pipes.
  4. Double rows taper roller bearings are fitted on pump end, roller bearings are fitted on drive end. Bearings are lubricated by oil which can modify bearing working condition and increase wear life of bearings.
  5. Mechanical seal adopted is special for cartridge mechanical seal of FGD process.

Technical Parameters

 Pump   Model    

       Capacity          Q  (m3/h)

       Head          H (m)

    Speed          n (r/min)

    Max.Eff.    (%)

        NPSH         (m)

    Outlet Dia./  Inlet Dia.     (mm)

 
 
1000X- TL(R)

10440

15

485

89

7.0

1000/1200

 
900X-TL(R)

15000

30

485

90

8.5

900/1000

 
800X-TL(R)

9360

31

485

90

7.0

800/900

 
700X-TL(R)

6840

26

485

87

6.0

700/800

 
600X-TL(R)

6300

25.5

620

88

5.5

600/700

 
500X-TL(R)

3750

25

725

85

5.0

500/500

 
400X-TL(R)

2500

25

725

83

5.0

400/450

 
350X-TL(R)

1600

25

960

82

4.5

350/400

 
300X-TL(R)

720-1800

15-40

450-800

60-79

2-5.5

300/350

 
250X-TL

540-1800

20-75

450-900

75-86

2-4

250/300

 
200R-TL(R)

360-1000

10-40

450-980

80-85

2-5.5

200/250

 
150R-TL(R)

200-800

15-60

600-1200

65-80

2-5.5

150/200

 
150E-TL(R)

150-540

12-40

800-1480

50-67

2.5-6

150/200

 
100E-TL(R)

70-360

15-55

800-1600

50-68

2-6.5

100/150

 
100D-TL(R)

20-220

10-40

800-1800

50-65

2-4.5

100/150

 
75D-TL(R)

40-160

10-50

1000-2200

50-72

2-6

75-100

 
75CC-TL(R)

30-130

8-45

900-2400

40-57

2-6.5

75/100

 
50D-TL

70-140

25-85

850-1450

30-47

2-6.5

50/75

 
50CC-TL(R)

40-85

12-64

1300-2700

40-58

2-10

50/75

 
50BB-TL(R)

16-75

9-44

1400-2800

35-62

2-5.5

50/75

 
40BB-TL(R)

32-72

6-58

1200-3200

30-45

2-8

40/50

 
20CC-TL

16-34

25-92

1400-2200

16-20

2-4.5

20/40

 
20BB-TL(R)

12.5-28

6-68

1200-3800

20-40

2-4.5

20/40

 
20A-TL(R)

2.5-10

6-37

1400-3000

15-30

 

20/40

 

 

Constuction

TL web

 

Sheet One

  NO.  Name    Material NO.    Name  Material
1 Support  Cast Iron 7 Suction Cover  duplex phase stainless white iron
2      Impeller Release Collar Stainless Steel 8 Impeller   duplex phase stainless white iron
3 Shaft Sleeve ZG0Cr18Ni12Mo2Ti 9 Cover Plate QT500-7 Ductile iron
4      Mechanical Seal  Hard Alloy 10 Frame Plate Liner Natural Rubber+A3
5 Frame plate Liner Insert  Natural Rubber+A3 11 Frame Plate QT500-7 Ductile iron
6 Cover Plate Liner  Natural Rubber+A3 12 Adaptor Plate QT500-7 Ductile iron

Sheet Two

 NO.      Name   Material  NO.   Name    Material
1 Support  Cast Iron 7 Throatbushing     duplex phase stainless white iron
2      Impeller Release Collar  Stainless Steel 8 Impeller  duplex phase stainless white iron
3 Shaft Sleeve ZG0Cr18Ni12Mo2Ti 9 Suction Cover    QT500-7+Rubber
4  Mechanical Seal  Hard Alloy 10     Cover Plate QT500-7 Ductile Iron
5 Frame plate Liner insert duplex phase stainless white iron 11 Frame Plate QT500-7 Ductile Iron
6 Volute liner duplex phase stainless white iron 12 Adaptor Plate QT500-7 Ductile Iron

Material Adopted

Our company developed a kind of new material duplex phase stainless white iron (A49)on FGD device specially. The material has anti-corrosive property of duplex stainless steel and anti-abrasive property of high chrome white iron so that it has remarkable anti-abrasive and anti-corrosive property in FGD process.

Pump casing, pump cover and adaptor plate are bearing pressure parts which are made of ductile iron.

Rubber lined pump: impeller, suction cover/front liner insert are made of duplex phase stainless white iron. Front liner, back liner, back liner insert material is natural rubber which has good anti-corrosive property with light weight, low cost.

Metal lined pump: impeller, volute liner, throatbushing ,frame plate liner insert are made of duplex stainless white iron. Suction cover is made of ductile iron with rubber stuck.

 

TL 3D

 

Advantages

  • The distinct characteristic of our FGD engineering pump is double-casing and rubber lined technology. Double-casing structure refers that the pump body is divided into outer pump shell and inner lining. The former bears pressure and insulates slurry. The latter contact abrasive and corrosive slurry. we only need to replace the worn out inner liner.
  • FGD engineering pump is mainly used to transport limestone and gypsum slurry. This requires the wet part performance well not only in anti-abrasive but also in anti-corrosive. Therefore, the wet parts (such as: impeller, volute liner and frame plate insert, etc.) adopt A49 combined with rubber material. The engineering practice shows that the  service life of components made by ours is triple or even higher than the traditional Cr30A products or duplex stainless steel pump.
  • A49 material is a kind of abrasive-resistant and corrosive-resistant alloy widely used for FGD projects in the world , the main composition include chromium 28-30%,  molybdenum 2-3%, nickel%, carbon 1%, copper is less than or equal to 2%. Corrosive-resistance characteristic: this is given by the austenitic element. In the 70 degree sulfuric acid solution which contains chloride 100000ppm and pH value of 4, the corrosion rate of is 0.5mm/a. In the 60 degree solution which contains 5% nitric, the corrosion rate is 0.5mm/a. In the sodium hydroxide solution at 80 degree and pH value of 13, the corrosion rate is 0.5mm/a. Wear-resistance characteristic: The abrasion performance is given by the chromium carbide on the grain boundary and secondary carbon compounds precipitated on austenite bodies. The abrasion performance is equal to A05, GLH-5, Ni-1.
  • TL (R) series FGD engineering pump has the characteristics of uniform parts specifications, widely used in the market, fast delivery, long service time, convenient installation, low cost and so on.

Product detail pictures:

High reputation for
 TL(R)Series FGD Pump  Supply to Sevilla detail pictures


Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for High reputation for TL(R)Series FGD Pump Supply to Sevilla, The product will supply to all over the world, such as: Japan , Somalia , Istanbul , Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we provide our clients with high quality products and excellent service. Please feel free to contact us for further information.


  • Contact Person: Jessica Wang Tel: 0086–13969891023
    Skype: jessica.extruder Email: salerjessica@tongsanextruder.com
    whatsapp/viber/wechat: 008613969891023

    1. Our machine exported to all over the world:

    Italy,UK,Poland,USA,Russia,Spain,Turkey,Ukraine,Seychelles, Australia,Canada,Brazil,India, Lebanon,Kenya,Greece,UAE,Czech Republic,Vietnam,Pakistan, Portugal,Iran, Africa …

    if you are interested in it and want to get more professional inforrmation,please contact me.

    2.Application of pvc pipes made from pvc pipe machine:

    PVC PIPES are applied to agricultural and construction water supply and drainage, overhead or underground wire and cable

    Due to the special characteristics of the CPVC plastic pipes, they are widely used in the fields of crude oil transportation, pipe lines of chemical industry which require high temperature and corrosion resistance, hot and lukewarm water supply and drainage system, directly buried pipes of high and extra high voltage electricity, protection sleeves of wires and cables, etc.

    3. Machine parts for the pvc pipe machine are all in good quality:
    This production line consists of conical (parallel) double-screw extruder, vacuum sizing platform, tractor, cutting machine, stacker, etc.

    4, the electricity parts for the pvc pipe machine are all the best:
    The conical double-screw extruder and tractor adopts AC frequency control or British Euro DC speed regulator. Vacuum pump and tractor adopts high-quality products.

    5. the die of the PVC pipe machine is made with good quality special mold material,
    you can change size sleeving to make different diameter for the pvc pipes:

    6. the cooling tank is 6 meters length, the size of cooling tank will be designed differently accoriding to the pipe size.

    7. The hauling off device for the pvc pipe machine are designed in good constructure:
    Tractors can be divided into up and down pedrail, three-claw, four-claw, six-claw, etc. in terms of thickness and diameter of the pipe.

    8. 6, the cutter for the pvc pipe machine is designed for different diameter :
    The cutter has two modes of cutting such as blade and planet type. Additionally, metering device is equipped. The property of the production line is reliable and the output is high.

    9. we have good experience in the complete pvc pipe machine, and we have the PVC pipe machine in our factory stock n ow:
    In accordance with different requirements of the clients, the company will equip the extrusion line with specific devices to form pipe production lines of inner-wall spiral pipes, inner hollow wall pipes and inner layer foaming pipes.



    Listen to the official audio of “All The Smoke” by 21 Savage, produced by Southside.

    Subscribe to 21 Savage’s official channel for exclusive music videos and behind the scenes footage: http://bit.ly/Subscribe-to-21Savage

    Follow 21 Savage:

    http://21Savage.com

    http://twitter.com/21Savage

    http://instagram.com/21Savage

    http://facebook.com/21Savage

    We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!















    5 Stars By Alice 2015-12-14 16:29
    Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!





    5 Stars By Ricardo 2015-11-03 12:07