High Quality for 100RV-SPR Rubber Sump Pump to Vietnam Factory
Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...
High Quality for 100RV-SPR Rubber Sump Pump to Vietnam Factory Detail:
Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .
The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
– Metal or rubber lined wet parts.
– Vertical construction, less Installation Space.
– Equipped with replaceable shaft protection sleeve.
– Double suction semi-open impeller.
– No submerged bearing or packing.
– Recessed impeller option passes over-sized material.
– Agitator option keeps solids in suspension.
– Can be run in insufficient suction duties.
– Smooth and stable operation.
– Special materials or casting for specific liquid.
||Allowable Max.Power (kw)||Clear Water Performance|
|Capacity Q||Head H (m)||Speed n (r/min)||Max.Eff. (%)||Impeller Dia. (mm)|
Standard Type Extension Type
|NO.||Parts Name||NO.||Parts Name|
|3||Bearing Housing||11||Pump Casing|
|4||Bearing Spacer||12||Lower Strainer|
|8||Strainer||16||Middle Support Part|
Over 20 years’ experience in pumps.
Various pump types.
Wear resistant materials.
Specialized Test Equipment.
Large quantity spare parts.
Anti-rust treatment casting.
Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…
Product detail pictures:
Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for High Quality for 100RV-SPR Rubber Sump Pump to Vietnam Factory, The product will supply to all over the world, such as: Turkey , Turkey , Canada , To make every client satisfied with us and achieve win-win success, we will continue to try our best to serve and satisfy you! Sincerely looking forward to cooperating with more overseas customers based on mutual benefits and great future business. Thank you.
This footage shows VORTEX 4 inch dredge at work on wind farm job off German coast 2010.
Operated at only 2552 psi (Not full power)
NOTE: The optimum working pressure is 3000 psi. (206 bar)
Considerably higher suction is available at higher hydraulic pressure. Please ask for further details.
(Digging 3 separate holes in this video)
Note: The distance between the white marks on the hose is 200mm.
4 inch Removal rates: Based on Magnetite black iron sand and rocks weighing 2.375kg per liter:
41 to 51 ton per hour
10% to 12% by volume
17 to 22 cubic meter per hour
Based on actual material moved during testing.
Basic principle and practical procedure of the tensile test on ductile metallic materials
– Testing machine (Inspekt 200 kN, Hegewald & Peschke Meß- und Prüftechnik GmbH), specimen, extensometer
– Material with yield point phenomenon
– Elastic and plastic behaviour, uniform elongation, necking, fracture
– Yield strength, tensile strength, percentage elongation at fracture
– Material without yield point phenomenon
– Plastic behaviour, proof strength
Responsible for this video: Prof. Dr.-Ing. Rainer Schwab, Hochschule Karlsruhe (Karlsruhe University of Applied Sciences), Germany
By Andy 2016-6-18 17:47
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Antonio 2016-9-15 12:57