High definition wholesale TL(R)Series FGD Pump to United Arab emirates Factory

High definition wholesale
 TL(R)Series FGD Pump  to United Arab emirates Factory

Short Description:

Introduction Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD. Samples 600X-TLR: The diameter of discharge: 600mm. bearing lubr...


Product Detail

Product Tags

Related Video

Feedback (2)

We not only will try our greatest to offer superb companies to just about every buyer, but also are ready to receive any suggestion offered by our shoppers for , , , All products and solutions arrive with high quality and fantastic after-sales expert services. Market-oriented and customer-oriented are what we now have been being immediately after. Sincerely look ahead to Win-Win cooperation !
High definition wholesale TL(R)Series FGD Pump to United Arab emirates Factory Detail:

Introduction

Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD.

Samples

600X-TLR: The diameter of discharge: 600mm. bearing lubricating type: thin oil, rubber liner.

700X-TL: The diameter of discharge:700mm, bearing lubricating type: thin oil, metal liner.

Features

  1. CFD flowing simulating analysis technology is adopted on wetted parts of pump, it has a reliable property and high operational efficiency.
  2. To adjust bearing assembly can change impeller position in volute, it can keep pump unit in a state of high efficient operation.
  3. The pump is back pull-out construction, it has easy construction and simplifies maintenance. It can be disassembled without dismantling suction & discharge pipes.
  4. Double rows taper roller bearings are fitted on pump end, roller bearings are fitted on drive end. Bearings are lubricated by oil which can modify bearing working condition and increase wear life of bearings.
  5. Mechanical seal adopted is special for cartridge mechanical seal of FGD process.

Technical Parameters

 Pump   Model    

       Capacity          Q  (m3/h)

       Head          H (m)

    Speed          n (r/min)

    Max.Eff.    (%)

        NPSH         (m)

    Outlet Dia./  Inlet Dia.     (mm)

 
 
1000X- TL(R)

10440

15

485

89

7.0

1000/1200

 
900X-TL(R)

15000

30

485

90

8.5

900/1000

 
800X-TL(R)

9360

31

485

90

7.0

800/900

 
700X-TL(R)

6840

26

485

87

6.0

700/800

 
600X-TL(R)

6300

25.5

620

88

5.5

600/700

 
500X-TL(R)

3750

25

725

85

5.0

500/500

 
400X-TL(R)

2500

25

725

83

5.0

400/450

 
350X-TL(R)

1600

25

960

82

4.5

350/400

 
300X-TL(R)

720-1800

15-40

450-800

60-79

2-5.5

300/350

 
250X-TL

540-1800

20-75

450-900

75-86

2-4

250/300

 
200R-TL(R)

360-1000

10-40

450-980

80-85

2-5.5

200/250

 
150R-TL(R)

200-800

15-60

600-1200

65-80

2-5.5

150/200

 
150E-TL(R)

150-540

12-40

800-1480

50-67

2.5-6

150/200

 
100E-TL(R)

70-360

15-55

800-1600

50-68

2-6.5

100/150

 
100D-TL(R)

20-220

10-40

800-1800

50-65

2-4.5

100/150

 
75D-TL(R)

40-160

10-50

1000-2200

50-72

2-6

75-100

 
75CC-TL(R)

30-130

8-45

900-2400

40-57

2-6.5

75/100

 
50D-TL

70-140

25-85

850-1450

30-47

2-6.5

50/75

 
50CC-TL(R)

40-85

12-64

1300-2700

40-58

2-10

50/75

 
50BB-TL(R)

16-75

9-44

1400-2800

35-62

2-5.5

50/75

 
40BB-TL(R)

32-72

6-58

1200-3200

30-45

2-8

40/50

 
20CC-TL

16-34

25-92

1400-2200

16-20

2-4.5

20/40

 
20BB-TL(R)

12.5-28

6-68

1200-3800

20-40

2-4.5

20/40

 
20A-TL(R)

2.5-10

6-37

1400-3000

15-30

 

20/40

 

 

Constuction

TL web

 

Sheet One

  NO. Name   MaterialNO.   Name Material
1Support Cast Iron7Suction Cover duplex phase stainless white iron
2     Impeller Release CollarStainless Steel8Impeller  duplex phase stainless white iron
3Shaft SleeveZG0Cr18Ni12Mo2Ti9Cover PlateQT500-7 Ductile iron
4     Mechanical Seal Hard Alloy10Frame Plate LinerNatural Rubber+A3
5Frame plate Liner Insert Natural Rubber+A311Frame PlateQT500-7 Ductile iron
6Cover Plate Liner Natural Rubber+A312Adaptor PlateQT500-7 Ductile iron

Sheet Two

 NO.     Name  Material NO.  Name   Material
1Support Cast Iron7Throatbushing    duplex phase stainless white iron
2     Impeller Release Collar Stainless Steel8Impeller duplex phase stainless white iron
3Shaft SleeveZG0Cr18Ni12Mo2Ti9Suction Cover   QT500-7+Rubber
4 Mechanical Seal Hard Alloy10    Cover PlateQT500-7 Ductile Iron
5Frame plate Liner insertduplex phase stainless white iron11Frame PlateQT500-7 Ductile Iron
6Volute linerduplex phase stainless white iron12Adaptor PlateQT500-7 Ductile Iron

Material Adopted

Our company developed a kind of new material duplex phase stainless white iron (A49)on FGD device specially. The material has anti-corrosive property of duplex stainless steel and anti-abrasive property of high chrome white iron so that it has remarkable anti-abrasive and anti-corrosive property in FGD process.

Pump casing, pump cover and adaptor plate are bearing pressure parts which are made of ductile iron.

Rubber lined pump: impeller, suction cover/front liner insert are made of duplex phase stainless white iron. Front liner, back liner, back liner insert material is natural rubber which has good anti-corrosive property with light weight, low cost.

Metal lined pump: impeller, volute liner, throatbushing ,frame plate liner insert are made of duplex stainless white iron. Suction cover is made of ductile iron with rubber stuck.

 

TL 3D

 

Advantages

  • The distinct characteristic of our FGD engineering pump is double-casing and rubber lined technology. Double-casing structure refers that the pump body is divided into outer pump shell and inner lining. The former bears pressure and insulates slurry. The latter contact abrasive and corrosive slurry. we only need to replace the worn out inner liner.
  • FGD engineering pump is mainly used to transport limestone and gypsum slurry. This requires the wet part performance well not only in anti-abrasive but also in anti-corrosive. Therefore, the wet parts (such as: impeller, volute liner and frame plate insert, etc.) adopt A49 combined with rubber material. The engineering practice shows that the  service life of components made by ours is triple or even higher than the traditional Cr30A products or duplex stainless steel pump.
  • A49 material is a kind of abrasive-resistant and corrosive-resistant alloy widely used for FGD projects in the world , the main composition include chromium 28-30%,  molybdenum 2-3%, nickel%, carbon 1%, copper is less than or equal to 2%. Corrosive-resistance characteristic: this is given by the austenitic element. In the 70 degree sulfuric acid solution which contains chloride 100000ppm and pH value of 4, the corrosion rate of is 0.5mm/a. In the 60 degree solution which contains 5% nitric, the corrosion rate is 0.5mm/a. In the sodium hydroxide solution at 80 degree and pH value of 13, the corrosion rate is 0.5mm/a. Wear-resistance characteristic: The abrasion performance is given by the chromium carbide on the grain boundary and secondary carbon compounds precipitated on austenite bodies. The abrasion performance is equal to A05, GLH-5, Ni-1.
  • TL (R) series FGD engineering pump has the characteristics of uniform parts specifications, widely used in the market, fast delivery, long service time, convenient installation, low cost and so on.

Product detail pictures:

High definition wholesale
 TL(R)Series FGD Pump  to United Arab emirates Factory detail pictures


To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for High definition wholesale TL(R)Series FGD Pump to United Arab emirates Factory, The product will supply to all over the world, such as: Namibia , Swedish , Hungary , Our company has always insisted on the business principle of "Quality, Honest, and Customer First" by which we have won the trust of clients both from at home and abroad. If you are interested in our products, please do not hesitate to contact us for further information.


  • DUBBED IN MALAYALAM BY MR. SUNIL KUMAR

    This is a lovely experiment to demonstrate centrifugal force. You need an empty pen tube with thread inside it. There is a heavy battery at the lower end and a light rubber ball on the top end. The battery is almost 10 times heavier than the ball. But as you spin the pen body the ball surprisingly lifts up the much heavier battery. This is possible because of the force of rotation.
    You can make a wonderful pump based on the same principle. You will need a 1-meter rubber tube and a bottle full of water. Dip one end of the tube deep in the bottle. Suck out water from the other end. Water will start flowing because of siphon. Now you hold the free end and spin it all around. Water will be lifted up by this centrifugal pump and will disperse all around like a sprinkler. Slowly the level of water in the bottle will go down and soon you’ll be able to drain out the whole bottle.
    You can see children get wet in this artificial rain. This is a great outdoor experiment for a very hot day.

    This work is supported by IUCAA (www.iucaa.in) and TATA Trust (http://www.tatatrusts.org/) and (www.tata.com/aboutus/sub_index/Tata-trusts)

    TATA Trust: Education is one of the key focus areas for Tata Trusts, aiming towards enabling access of quality education to the underprivileged population in India. To facilitate quality in teaching and learning of Science education through workshops, capacity building and resource creation, Tata Trusts have been supporting Muktangan Vigyan Shodhika (MVS), IUCAA’s Children’s Science Centre, since inception. To know more about other initiatives of Tata Trusts, please visit www.tatatrusts.org

    Credits:,Ashok Rupner, Manish Jain, Pradnya Pujari, Shivaji Mane, Jyoti Hiremath, Arvind Gupta, Vidula Mhaiskar

    Dubbed in Malayalam by Aravind Raj



    Powerful 05 HP 1600 GPH keeps your water sparkling clean pump flow rate 1600 GPH system flow rate 1500 GPH
    Easy operation 6-way filter valve makes maintenance easy giving options to backwash rinse recirculate drain filter and close system
    Saltwater system combines a unique two-stage technology to sanitize your pool – with Natural Salt and Copper Ionization
    Both systems are controlled automatically with a built-in 24 hour timer to make daily operation carefree and easy
    Includes INTEX Deluxe Maintenance Kit with Leaf rake with debris net curved wall brus deluxe vacuum scrubber vac skimmer pole
    Click below to buy on Amazon: http://www.amazon.com/gp/product/B00CAY4HGC?tag=stationmbolos-20

    The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.










    5 Stars By Rebecca 2016-6-28 18:47
    The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.



















    5 Stars By Linda 2015-12-30 16:23