Good User Reputation for SP(R) Series Sump Pump Export to Australia

Good User Reputation for
 SP(R) Series Sump Pump  Export to Australia

Short Description:

Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...


Product Detail

Product Tags

Related Video

Feedback (2)

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of , , , Warmly welcome to cooperate and develop with us! we are going to continue to provide product or service with high quality and competitive rate.
Good User Reputation for SP(R) Series Sump Pump Export to Australia Detail:

Introduction

Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.

Wet parts of type SP pumps are made of abrasion-resistant metal.

All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .

The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.

Features

– Metal or rubber lined wet parts.

– Vertical construction, less Installation Space.

– Equipped with replaceable shaft protection sleeve.

– Double suction semi-open impeller.

– No submerged bearing or packing.

– Recessed impeller option passes over-sized material.

– Agitator option keeps solids in suspension.

– Can be run in insufficient suction duties.

– Smooth and stable operation.

– Special materials or casting for specific liquid.

Technical Parameters

 Pump    Model    Allowable Max.Power (kw)   Clear Water Performance
   Capacity Q   Head H(m)  Speed     n  (r/min) Max.Eff. (%) Impeller  Dia. (mm)
     m3/h
   l/s
40PV-SP 15 19.44-43.2 5.4-12 4.5-28.5 1000-2200 40 188
40PV-SPR 17.28-39.6 4.8-11 4–26 1000-2200 40 188
65QV-SP 30 23.4-111 6.5-30.8 5-29.5 700-1500 50 280
65QV-SPR 22.5-105 6.25-29.15 5.5-30.5 700-1500 51 280
100RV-SP 75 54-289 15-80.3 5-35 500-1200 56 370
100RV-SPR 64.8-285 18-79.2 7.5-36 600-1200 62 370
150SV-SP 110 108-479.16 30-133.1 8.5-40 500-1000 52 450
200SV-SP 110 189-891 152.5-247.5 6.5-37 400-850 64 520
250TV-SP 200 261-1089 72.5-302.5 7.5-33.5 400-750 60 575
300TV-SP 200 288-1267 80-352 6.5-33 350-700 50 610

Construction

26

Standard Type                                                        Extension Type

NO.

Parts Name

NO.

Parts Name

1

Shaft

9

Back Liner

2

Bearing

10

Impeller

3

Bearing Housing

11

Pump Casing

4

Bearing Spacer

12

Lower Strainer

5

Bearing

13

Discharge Pipe

6

Shim

14

Flushing Pipe

7

Column

15

Coupling Part

8

Strainer

16

Middle Support Part

Advantages

Over 20 years’ experience in pumps.

Various pump types.

Wear resistant materials.

Specialized Test Equipment.

Large quantity spare parts.

Anti-rust treatment casting.

Application

Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…


Product detail pictures:

Good User Reputation for
 SP(R) Series Sump Pump  Export to Australia detail pictures


The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for Good User Reputation for SP(R) Series Sump Pump Export to Australia, The product will supply to all over the world, such as: Georgia , Cameroon , Dominica , We firmly think that we have the full capability to present you contented merchandise. Wish to collect concerns within you and build a new long-term synergy romantic relationship. We all significantly promise:Csame excellent, better selling price; exact selling price, better quality.


  • Read more from Paul Heney on Hydraulics at http://www.mobilehydraulictips.com/blog/

    Accumulators are pressure vessels that store hydraulic energy and deliver that energy back to the system on demand. This is analogous to the way a car battery stores energy. In hydro-pneumatic accumulators, compressible gas (nitrogen) is used to keep stored fluid pressurized. Hydro-pneumatic accumulators are used extensively in the global fluid power industry. In process plant operations, accumulators have multiple uses: pulsation dampeners, emergency power source, thermal expansion, transfer barrier for fluid separation, as prefill for large volume press applications, noise attenuation, leakage compensators, dispensers for pressurized lubricants, auxiliary power, and others.

    There are different designs to separate gas from fluid. Bladder accumulators use a flexible closed bladder. Diaphragm accumulators use a flexible open diaphragm (membrane). Piston accumulators use a moveable piston with a system of seals. Float accumulators allow a buoyant valve to open and close the accumulator when necessary. For seamless high pressure bladder accumulators, chrome-moly steel has been used extensively for more than 40 years. This material has a high tensile strength, equivalent to AISI 4130. This material lends itself well to forming and machining and has a burst pressure more than 350% of design, that being 3.5:1 safety factor conforming to the ASME Code, Section VIII, Div. I. for unfired pressure vessels. Various applied coatings can enhance resistance to rust, corrosion, and abrasion. Most notably is the internal coating of phenolic resins. This material is an excellent choice to resist many common process fluids and has shown excellent chemical resistance. It is easily applied, and for bladder accumulators, aids in applications where lubrication from the working fluid is poor. Because of the smooth surface, it helps prevent the bladder from adhering to the internal wall surface during operation. Electro-less nickel plating is also very popular. This coating is applied approximately 2-mm thick internally and externally. Electro-less nickel has proven to be a very durable material, cost effective, and has been shown to be a viable alternative in many applications to the significantly more costly stainless steels, while maintaining the strength integrity of the carbon steel. This variation, as with the phenolic coated variation, can be combined with 316 stainless steel connections. These connections include the fluid and gas ends of the accumulator, along with the all of the internal component parts. An added feature of nickel plating also protects the accumulator on the outside, for those applications where water wash down or corrosive vapors may come into play. Electrolytic action between the stainless steel and electro-less nickel is seldom seen. There are several accumulator manufacturers that will produce accumulator housings using 316 stainless steel. However, because 316 stainless steel does not have the tensile strength of high carbon steels, the wall thickness must be adjusted to a thicker dimension to equal the strength of chrome-moly steel, especially for accumulator designs over 500 psi maximum allowable working pressure. Stainless steel housing hydraulic accumulators are usually special order, both in the piston and bladder configurations and therefore may have extended delivery times.



    The first step in troubleshooting a submersible pump is having the proper voltage. This is essential because, without it, the pump will either not run or will run on high amp but damage the pump itself. If you need help in checking your voltage, consult the expertise of this video or give A.Y. McDonald a call at 1-800-AY-CARES.

    Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.







    5 Stars By Ivy 2016-11-28 15:42
    This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.

    5 Stars By Princess 2016-10-14 18:15