Good Quality G and GH Series Pump to Manila Manufacturer
Product Features Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps. Construction Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. ...
Good Quality G and GH Series Pump to Manila Manufacturer Detail:
Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni_hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
1.Support 8. Discharge Joint Ring
2.Bearing Housing Assembly 9. Discharge Flang
3.Adapter Plate Clamp Band 10. Door Clamp Band
4.Volute Liner Seal 11. Cover Plate
5.Frame Plate Liner Insert 12. Intake joint ring
6. Impeller 13. Intake flange
7. Frame Plate / Bowl 14. Adapter plate
|Clear Water Performance|
|Capacity Q|| Head
|Impeller. Dia. (mm)|
The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.
Product detail pictures:
We're committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for Good Quality G and GH Series Pump to Manila Manufacturer, The product will supply to all over the world, such as: Curacao , Cyprus , Equatorial Guinea , If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Wastewater Treatment Plant Process Flow Description
The process starts with a flow equalization chamber that has a gravity fed inlet or it can be pumped into by a lift station. This chamber is designed to equalize the flow to the aeration chamber during surges through out the day. The flow equalization tank also has a blower which introduces air to the Jet diffusers; the diffusers are used for mixing in this tank and aerating this chamber. This is also a pretreatment chamber. The flow equalization tank has a submersible pump that is controlled by a 24 hour timer, which pumps to the aeration chambers to provide it with the necessary micro-organisms for the biological treatment process to begin.
The Aeration tank is the next chamber of biological treatment. In this chamber a blower is provided to aerate and mix the tank with Jet diffusers. Aeration basins supply large amounts of air to the mixture of primary wastewater and helpful bacteria and the other microorganisms that consume the harmful organic matter. The growth of the helpful microorganisms is sped up by vigorous mixing of air (aeration) with the concentrated microorganisms (activated sludge) and the wastewater. Adequate oxygen is supplied to support the biological process at a very active level. The ratio of food (organic matter) to organisms to oxygen is monitored and adjusted to meet variations in the wastewater.
The clarifier allows the biological mass (the microorganisms) to settle from the water by gravity. This mixture, called “activated sludge,” is returned to the aeration basins to help maintain the needed amount of microorganisms. Air lift pumps return the settled sludge to the first aeration chamber for further treatment. The skimmer in this chamber removes the fats, oils and greases, returning them to the aeration chamber for further treatment. Supernatant leaves this chamber by gravity utilizing the effluent weir.
The Aerobic digester is equipped with diffuser for mixing and provides a holding tank for wasted sludge from the clarifier. Upon settling supernatant is pumped back to flow equalization.
Effluent from the clarifier travels through the Jet Chlorinator for disinfection. Effluent is stored in the chlorine contact chamber for a minimum of 30 minutes to sterilizing harmful bacteria.
Effluent from the Chlorine Contact chamber is then pumped through a filter for irrigation usage.
ProMinent’s Dulcoflex product line uses roller technology in heavy duty pumps for industrial and municipal applications. They have a max pressure of 116 psi and a flow range of 0.11 gpm to 130 gpm. While discussing how to choose the correct pump, this video illustrates our Dulcoflex line and the options available for the pumps.
By Jean 2016-7-23 19:06
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Karen 2016-8-29 15:42