Good quality 100% Bearing Housing for Las Vegas Manufacturer

Click Here To Subscribe! ► https://bit.ly/JOovvU – Ever want to Run an Excavator – but will never do it in Full Scale? Maybe you ran HD equipment – but are now retired? Let me put you in the seat of my Excavator – FPV Style! First Person View (FPV) is becoming very popular for Aircraft – but what about on the Ground? In this video, I have already outfitted my RC Excavator / RC4WD Earth Digger 4200XL – with an FPV System. The system consists of Fat Shark “Attitude” googles, an Immersion RC 5.8ghz Transmitter, and a GoPro Hero 3 Black edition camera.

These are powered with a set of Gensace Lipo Batteries.

OK – I know lots of folks ask me questions about these rigs – and where I get them – so please see the info below for all of your questions Answers! For now, I have to get outside for more diggin’!

Heads UP: Decals seen in video are NOT iNCLUDED with the RC’s.. they are mine..

From the RC4WD Website: https://store.rc4wd.com/

Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C.

TRUCK: 1/14 8×8 Armageddon Hydraulic Dump Truck: https://goo.gl/lUnsQa

The Armageddon is one of the most powerful R/C hydraulic dump truck available today. Highly detailed base on European style dump truck. Engineered specifically for the tough demands of transporting gravel, sand, asphalt, snow, wood chips or rocks. Created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 1000kV high speed brushless system.

Specification:

Hard plastic European style front Cab
Full metal 2 speed transmission (Planetary gears)
European style V shape dumper
Full electronic sound system (engine start, idle and more)
Transfer case (billet alum)
Scale fuel tank (billet alum)
Super scaled leaf spring suspension setup
Scale rims (billet alum)
Remote lockable rear axle (locking differential)
Full metal front and rear axle housing
Steel scale drive shaft
Realism front cab latch
Retractable steel ladder
Molded functional fuel tank (filled with hydraulic oil)
Automatic trailer gate (do not attempt to open it by hand)
Retractable steel ladder
Rear light guard (protect against rock)
Scale light bucket (fit 3-5mm LED)
Recommended payload: 16kg/35lbs
Maximum lift power: 42kg/92lbs
Fully painted
Scale fire extinguishers and spare wheel/tire
Cylinder maximum thrust: 109kg/231 lbs
Brushed driven motor
1000kV Brushless motor-driven micro hydraulic pump
Length: 687mm/27inch
Width: 186mm/7.3inch
Height: 262mm/10.3inch
Weight: 8kg/17lbs
Axle gear ratio: 2.6:1
Transfer case gear ratio: 1:1
Theoretical load: 15kg/33lbs
Load total mass: 23kg/50lbs
First gear 1:16, second gear 1:4 (Transmission)
Basic 6 channel 2.4Ghz radio
Basic 60T 540 motor
30 days limited warranty
This product is professionally pre-assembled

1/12 Scale Earth Digger 4200XL Hydraulic Excavator: https://goo.gl/aH2Akw

Earth Digger 4200 hydraulic excavator is the most power excavator available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to dig! Massive power through 350kV brushless system.

100% CNC machined aluminum (except track and hydraulic pump)
Custom 8 channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized steel hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel molded tracks (50mm width, 45 grade carbon steel)
Efficient under carriage with tracks
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (endless)
Powder coated in yellow
Massive brushless system (hydraulic)
125A brushless ESC with BEC
350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft)
Neodymium magnets
Belt/track is track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Digging force: 15kg/33pounds
Driving speed: 310 meter per hour
Scale: 1:12
Dig depth: 495mm/19.4inch
Height of cabin: 155mm/6.1inch
Length: 1.15meter/45inch
Width: 250mm/9.8inch
Height: 840mm/33inch
Deadweight: 20kg/44lbs
Operating oil pressure: 20Bar, 290psi
Manufactured by JDCustoms

This video will assist in disassembling your Graco SaniForce 2150 AODD pump. Use this in conjunction with you I.O.M. (Installation & Operation Manual) to get your Graco 2150 up and running.

Contact Springer Pumps today for more information, a quote or a consultation to find out how Springer Pumps and Graco SaniForce can improve your process and bottom line.

https://catalog.springerpumps.com/category/sanitary-pumps-equipment-packages

This video is not a substitute for reading and understanding all instruction manuals and warning labels supplied with the equipment. This video is also not a substitute for reading and understanding the MSDS supplied by the material supplier. Failure to do so could cause serious injury or death. Always read, in their entirety, all product documentation before installing or performing any work involving industrial/commercial equipment or materials.

-~-~~-~~~-~~-~-
Please watch: “BLACOH SENTRY Chargeable Air Control Conversion”

-~-~~-~~~-~~-~-