Factory Supplier for ZGB High Performance Slurry Pump for New Zealand Importers

Factory Supplier for ZGB High Performance Slurry Pump for New Zealand Importers

Short Description:

Introduction In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main ...


Product Detail

Product Tags

Related Video

Feedback (2)

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for , , , We're searching ahead to setting up long-term company associations with you. Your comments and solutions are remarkably appreciated.
Factory Supplier for ZGB High Performance Slurry Pump for New Zealand Importers Detail:

Introduction

In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our factory has designed and developed series ZGB(P) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad. The main technical features are as follows,

CAD modern design , super hydraulic performance, high efficiency and lower abrasive rate;

Wide passage, non-clogging and good performance of NPSH;

Expeller seal combined with packing seal and mechanical seal have be adopted to guarantee the slurry from leakage;

Reliability design ensures long MTBF (mean time between events);

The metric bearing with oil lubrication, reasonable lubrication and cooling systems ensure the bearing to be operated under the low temperature;

The materials of wet parts have the good performance of anti-wearing and anti-corrosion.

The pump can be used for seawater ash-removing to prevent it from the corrosion of seawater, salt and mist, and electrochemical corrosion;

The pump can be operated in series with multi-stage within permissible pressure.

The permissible maximum working pressure is 3.6MPa.

The series of pump has the advantages of reasonable construction, high efficiency, reliable operation and easy maintenance. It can be widely used for handling the mixture contained of abrasive and corrosive solids in electric power, metallurgy, mine, coal, constructional material and chemical industry departments, especial for removing ash and sludge in electric power station.

Product Features

1. The series ZGB(P) slurry pump is of horizontal, single-stage, single-suction, cantilever, double-casing, centrifugal slurry pump. The pump rotates in clockwise viewed from the drive end.

2. The wet parts of ZGB and ZGBP pump at the same outlet diameter can be interchangeable. Their outline installation dimensions are one and the same. For the drive part of the series ZGB(P) slurry pump, the horizontal split frame with oil lubrication and two sets of water cooling systems inside and outside has been adopted. If necessary, cooling water can be supplied. The prepared joint for cooling water and the pressure of the cooling water can be seen in table 1.

3. Two kinds of shaft seal—expeller seal combined with packing and mechanical seal have been used for series ZGB(P) slurry pump.

4. The mechanical seal supplied with high pressure sealing water is recommended when the slurry pump is operated in series(two stages and above two stages), and the expeller seal combined with packing is used    in  single-stage pump.

Technical Parameters

Pump Model  Speed  n(r/min) Capacity Q  (l/s)   Head     H (m) Max.Eff.
(%)
 NPSH
(m)
Shaft  Power  (kw)  Impeller Dia (mm) Pump Weight (kg) Outlet Dia./Inlet Dia. (mm)
65ZGB 1480 31.7-15.8 58-61 62.5-47.4 4.5-3.0 28.8-19.9 390 1850 65 / 80
980 21.0-10.5 25.4-26.7 62.5-47.4 2.0-1.3 8.37-5.8
80ZGB 980 56.7-28.3 87.5-91.6 66.1-48.7 5.2-2.7 73.7-52.2 485 2500 80 / 100
740 37.5-18.8 38.4-40.2 66.1-48.7 2.3-1.2 21.4-15.2
980 52.0-26.0 73.7-77.1 66.1-48.7 4.4-2.3 56.8-40.4 445
740 34.4-17.2 32.3-33.8 66.1-48.7 1.9-1.0 16.5-11.7
980 46.8-23.3 59.5-62.3 66.1-48.7 3.5-1.8 41.3-29.2 400
740 31.0-15.4 26.1-27.3 66.1-48.7 1.5-0.8 12.0-8.4
100ZGB 1480 116.7-58.3 85.1-91.8 77.9-57.4 6.0-2.6 124.9-91.4 500 3000 100 / 152
980 77.3-38.6 37.3-40.3 77.9-57.4 2.7-1.2 36.3-26.6
1480 105-52.5 68.9-78.4 77.9-57.4 4.9-2.1 91.0-66.7 450
980 69.5-34.8 30.2-32.6 77.9-57.4 2.1-1.1 26.4-19.4
1480 93.4-46.7 54.5-58.8 77.9-57.4 3.8-1.7 64.0-46.9 400
980 61.8-30.9 23.9-25.8 77.9-57.4 1.7-0.8 18.6-13.6
150ZGB 980 200-100 85.2-90.0 77.7-53.3 3.8-2.7 215.0-165.5 740 3450 150 / 200
740 151.2-75.6 48.6-51.3 77.7-53.3 2.2-1.5 92.7-71.3
980 182.4-91.2 73.0-77.1 77.7-53.3 3.3-2.3 168.0-129.3 685
740 140.0-70.2 41.6-44.0 77.7-53.3 1.9-1.3 74.2-56.8
980 169.2-84.6 61.8-65.2 77.7-53.3 2.8-1.1 131.9-101.5 630
740 129.6-64.8 35.2-37.2 77.7-53.3 1.6-0.6 57.6-44.3
200ZGB 980 300.0-150.0 89.0-94.2 76.3-63.2 6.7-2.7 342.9-219.1 740 4000 200 / 250
740 226.5-113.3 50.7-53.7 76.3-63.2 3.8-1.5 147.5-97.3
980 283.8-141.9 79.6-84.3 76.3-63.2 6.0-2.4 290.2-185.8 700
740 214.3-107.1 45.4-48.1 76.3-63.2 3.4-1.4 125.0-80.0
980 259.5-129.7 66.6-70.5 76.3-63.2 5.0-2.0 222.0-141.8 640
740 195.9-97.9 38.0-40.2 76.3-63.2 2.9-1.1 95.6-61.0
250ZGB 980 400.0-200.0 84.0-90.1 78.2-63.2 7.3-3.3 421.2-275.6 740 4500 250 / 300
740 302.0-151.0 47.9-51.4 78.2-63.2 4.2-1.9 181.4-118.7
980 378.4-189.2 75.2-80.6 78.2-63.2 7.1-3.0 356.7-233.2 700
740 285.7-142.9 42.9-46.0 78.2-63.2 4.0-1.7 153.7-100.5
980 348.6-131.6 63.8-68.5 78.2-63.2 5.5-2.5 278.8-137.9 645
740 263.2-99.4 36.4-39.1 78.2-63.2 3.1-1.4 120.1-59.4
300ZGB 980 533.3-266.7 84.3-93.4 81.2-68.3 6.9-3.5 542.8-357.6 760 5500 300 / 350
740 402.7-201.3 48.1-53.3 81.2-68.3 3.9-2.0 233.9-154.0
980 493.3-246.7 72.1-79.9 81.2-68.3 5.9-3.0 429.4-282.9 703
740 372.5-177.9 41.1-45.6 81.2-68.3 3.4-1.7 184.8-116.4
980 453.3-226.7 60.9-67.5 81.2-68.3 5.0-2.5 333.3-219.7 646
740 342.3-171.2 34.5-38.5 81.2-68.3 2.9-1.4 143.4-94.6

The water pressure and amount of all kinds of the shaft seal is as follows

Sealing water pressure

For single-stage pump with the expeller seal combined with packing, the water pressure of the shaft seal is 0.2-0.3MPa.

For multi-stage(two and above two stages) in series operation with the expeller seal combined with packing, the sealing water pressure should be:

The lowest sealing water pressure of n stage

Pn=  QQ图片20170302144648Hi+0.7Hn;Hi is i stage pump head;Hn is n stage pump head.

For mechanical seal, the sealing water pressure of each stage of pump is higher 0.1MPa than pump discharge pressure.

Sealing water pressure(see table 1)17


Product detail pictures:

Factory Supplier for ZGB High Performance Slurry Pump for New Zealand Importers detail pictures


We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support for Factory Supplier for ZGB High Performance Slurry Pump for New Zealand Importers, The product will supply to all over the world, such as: Namibia, Grenada, Nicaragua, We have exported our products all over the world, especially the USA and European countries. Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products, please don't hesitate to contact us. We will try our best to meet your needs.


  • In this HVAC video, I go over how the Heat pump defrost control board works, how to wire each terminal on the board, what happens during defrost mode, the voltage paths and the sequence of operation in depth. I explain how to test the defrost cycle on the board and how this board differs from others. I show you how to connect thermostat wire connectors to the heat pump. How to know if your heat pump defrost board is working properly so that it won’t freeze up.

    Supervision is needed by a licensed HVAC Tech before doing this as Experience and Apprenticeship garners Wisdom and Safety.

    These Videos are all part of our Training Series on HVACR Service, Installation, Preventative Maintenance, General Knowledge, and Tips. Please comment and ask for videos that you would like to see in the future! We come out with new videos every few days from my job sites, service calls, and the training shop! I hope you enjoy and find them very beneficial! See you next time at ACSERVICETECH Channel!

    Check out this Playlist Next!
    Air Conditioning and Heat Pump Refrigerant Charging—–

    https://www.youtube.com/playlistlist=PLxnHR5_D2ojzAUXWWQt9A8juotNkzwYlk

    Please add any Questions or Comments in the Box Below and I will Get Back with You!

    ACSERVICETECH is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
    You can enter Amazon through this Affiliate Link found here or in the ” Discussion” Channel Page Comments https://amzn.to/2aenwTq
    Prices are the same as usual. (Link has to be clicked on from an ACSERVICETECH YouTube source and not cut and pasted)

    Here is a link to Refrigerant hoses with valves used in the videos https://amzn.to/2aBumVI

    Here is the Link for the Yellow Jacket Refrigerant Manifold Gauge Set used in the videos https://amzn.to/2aenwTq

    Here is a link to the Hilmor 4 port Aluminum Manifold Gauge Set-

    https://amzn.to/2m4QLik

    Here is a link to the Appion core removal and vacuum tool- https://amzn.to/2t5ogIb

    Here is the link to the Fieldpiece SDMN6 Dual Pressure Testing Manometer with Pump-https://amzn.to/2jyK5Ka

    Here is a link to the UEI DL389 Multimeter used in the video https://amzn.to/2av8s3q

    Here is a link for RectorSeal Bubble Gas Leak Detector https://amzn.to/2ckWACn

    Here is a link to the Air Acetylene Torch setup- https://amzn.to/2aQalsb

    Here is a link the Nitrogen Regulator https://amzn.to/2bXdR5f

    Here is a link to the Nitrogen Flow Meter https://amzn.to/2brvoBg

    Here is a link for the Supco Magnet Jumpers https://amzn.to/2gS4h6z

    Here is a link to the Digital Refrigerant Scale used in the video

    https://amzn.to/2b9oXYl

    Here is a link to the thermostat 3/32 screwdriver — https://amzn.to/2hxt7uK

    Here is a link to the JB 6 CFM Vacuum Pump https://amzn.to/2nqbvo8

    Here is a link to the JB Platinum 5 CFM Vacuum Pump with Valve

    https://amzn.to/2mGKcSh

    Here is a link to the Supco Vacuum Micron Gauge https://amzn.to/2bH98bO

    Here is a link to the 1/4″ by 1/4″ female coupler from Supco – https://amzn.to/2kFrbU9

    Here is a link the Nitrogen Regulator https://amzn.to/2bXdR5f

    Here is a link to the Nitrogen Flow Meter https://amzn.to/2brvoBg

    Here is a link to the General Tools digital Psychrometer

    https://amzn.to/2cSHsi1

    Here is a link to the Amprobe Digital Psychrometer https://amzn.to/2d7cGkW

    Here is a link to the Fieldpiece SDP2 Digital Psychrometer- https://amzn.to/2nniMVR

    Here is the UEI Digital Manometer used in the videos https://amzn.to/2c1XkiT

    Here is the link for the Ratcheting Service Wrench https://amzn.to/2dGV4Nh

    Here is a link to the Appion G5 Twin Recovery Pump https://amzn.to/2dGSEyr

    Here is a link to the Malco Sheet metal scribe- https://amzn.to/2qCwu9D

    Here is a link to the Wiss Right Tin Snips- https://amzn.to/2rGnBvX

    Here is a link to the Wiss Bulldog snips- https://amzn.to/2rd1Dz5

    Here is a link to the Malco 90 Degree Right Hand Vertical Snips- https://amzn.to/2qHHpu4

    Here is a link to the Malco 90 Degree Left Hand Vertical Snips- https://amzn.to/2qHF564

    Here is a link to the Wiss 12″ Folding Tool/Breaker Bar- https://amzn.to/2qD3Lxi

    Here is a link to the Wiss 3 Pack Tin Snips- https://amzn.to/2bHWhWO

    Here is a link to the Wiss 5 Blade Crimper- https://amzn.to/2bwTlsW

    Here is a link to the Wiss Hand Seamers- https://amzn.to/2dRk83v

    Here is the link for the Irwin Wire Stripper/Cutter/Crimper https://amzn.to/2dGTj2V

    Here is the link to the Stanley 6 in 1 Screwdriver https://amzn.to/2q2SAhe

    Thanks for your support! I believe this to be the very
    best price I have found. Please let me know if anyone finds a lower price anywhere!

    Thank You,
    ACSERVICETECH



    100tph Laos Alluvial gold ore washing project mainly use the :
    Trommel Screen + Water Monitor+ STLB80 Gold Centrifugal Concentrator/Knelson Concentrator + 6-S Shaking Table + Slurry Pump + Water Pump

    More details please contact Ms. Silvia
    Whatsapp/Wechat/Mobile:+86 182 9677 5735
    Skype: silvia3377168
    Email: [email protected]

    Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!






    5 Stars By King 2015-11-06 10:12
    The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!





















    5 Stars By Alex 2016-2-22 12:22