Factory Price For 6/4D-G Gravel Pump to California Manufacturers
Product Features Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps. Construction Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. ...
Factory Price For 6/4D-G Gravel Pump to California Manufacturers Detail:
Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni_hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
1.Support 8. Discharge Joint Ring
2.Bearing Housing Assembly 9. Discharge Flang
3.Adapter Plate Clamp Band 10. Door Clamp Band
4.Volute Liner Seal 11. Cover Plate
5.Frame Plate Liner Insert 12. Intake joint ring
6. Impeller 13. Intake flange
7. Frame Plate / Bowl 14. Adapter plate
|Clear Water Performance|
|Capacity Q|| Head
|Impeller. Dia. (mm)|
The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.
Product detail pictures:
Fast and superior quotations, informed advisers to help you choose the correct merchandise that suits all your requirements, a short generation time, responsible quality control and different services for paying and shipping affairs for Factory Price For 6/4D-G Gravel Pump to California Manufacturers, The product will supply to all over the world, such as: Greece , Brazil , Sacramento , We have been fully aware of our customer's needs. We deliver high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
RIDDHI HORIZONTAL TYPE Ø 14″ x 8 Nos.
FILTER PRESS GMP MODEL MACHINE
• INTRODUCTION :
It is made out of S.S. quality sheet and provided with specially designed scavenger plate and safety valve. Total unit mounted on S.S. stand fitted with fibre castor wheels & motor is covered with S.S. sheet. Other details as follows.
• TECHNICAL SPECIFICATIONS :
A. MODEL NO. & TYPE
1. Model Type : Zero Hold Up Design
2. Model No. : RDFP — 148
B. EQUIPMENT DATA
1. Output Lit./ Hr. : 800 — 1200 dep. upon material characteristics.
2. MOC of Cont. Parts : S.S. 316
3. MOC of Non-Cont. : S.S. 304
4. Cake Holding Cap. : 24.75 Liters
5. Filtration Area in m² : 0.819
1. No. of Plates : 8
2. MOC : S.S.316
3. Diameter in inch : 14″
4. Height in mm. : 38
5. Thickness in mm : 1.5 / 16 SWG.
1. No. of Sieves : 8
2. MOC : S.S.316
3. Thickness in mm : 1.5 / 16 SWG.
E. FILTER CLOTH
1. MOC : Fibre Cloth
2. No. of Filters : 8
3. Size : Suitable for Sieve
4. Washing Media : Warm Water
1. MOC : S.S.316
1. MOC : S.S.304
2. Wheels : PU Lined Castor Wheels
3. Wheel Bracket : 316
4. No. of Wheels : 4
H. LOCKING SYSTEM
1. Centre Tie Rod : 1 No.
2. MOC of Cen. Tie Rod : S.S.316
3. Tie Rods (Side) : 6 Nos.
4. MOC of Tie Rods (Side) : S.S.316
5. Centre Inter Locking Cups : 9 Nos.
6. MOC of Cups : S.S.316
7. Scavanger Plates : 8 Nos.
8. MOC of Scavanger Plates : S.S.316
9. Bottom Plate : 13mm Thick
10. MOC of Bottom Plate : S.S.316
11. Key Bolts : S.S.304
12. Outlet Inlet Connections : 1″ Flange
13. Pressure Gauge : ¼” BSP (1 No. each at Inlet & Outlet)
14. Air Vent : ¼” BSP
15. Gasket : Silicon / Food Grade
1. Type of Pump : Centrifugal
2. MOC of Contact Parts : S.S.316
3. Capacity : 5 M³ / Hr.
4. Head : 18 Meter
5. Size : 3/4″
6. Type of Seal : Mechanical Seal
7. Description of Seal : 19mm TC v/s. TC
1. Motor : 2 HP
2. Speed : 2800 RPM
3. Make : Crompton / Bharat Bijalee / Kirloskar / Siemens.
4. Supply : 415 V / 50 Hz. / 3 Phase AC Supply
5. Motor & Pump Guard : S.S. 304
6. Motor & Pump Coupling : R 95 Lovjoy
Note: The flow rate mentioned is in terms of water with 5% carbon & filter media of poly propylene cloth/paper & centrifugal pump. Filtration rate may change depending on viscosity of liquids, quality of filter media and nature of solids in liquid to be filtered & type of pump used.
RIDDHI PHARMA MACHINERY LTD.
Manufacturers & Exporters of Pharmaceutical Machinery
Om-shivam soc., Tarun Bharat Bldg. No.2, Opp. Cigaratte Factory,
Sahar Road, Andheri 28East29 Mumbai-40099.Maharashtra, India
Tel. 91-22-2832 1332/91-22-28389432 Fax 91-22-28382479
Resi 91-22-2683 3777 Mobile 098210-18579
Email email@example.com /firstname.lastname@example.org
Air entrainment in a pumpsump with a vertical deflection plate at a distance of 4D of the discharging pipeline
These experiments have been performed as part of the CAPWAT project (2003 – 2010)
Deltares Website: http://www.deltares.nl
Capwat Wiki: http://capwat.deltares.nl
By Jenny 2015-12-14 14:03
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Sophia 2016-11-15 13:07