Factory Outlets 250TV-SP Sump Pump to Belgium Factories
Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...
Factory Outlets 250TV-SP Sump Pump to Belgium Factories Detail:
Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .
The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
– Metal or rubber lined wet parts.
– Vertical construction, less Installation Space.
– Equipped with replaceable shaft protection sleeve.
– Double suction semi-open impeller.
– No submerged bearing or packing.
– Recessed impeller option passes over-sized material.
– Agitator option keeps solids in suspension.
– Can be run in insufficient suction duties.
– Smooth and stable operation.
– Special materials or casting for specific liquid.
|Pump Model||Allowable Max.Power (kw)||Clear Water Performance|
|Capacity Q||Head H (m)||Speed n (r/min)||Max.Eff. (%)||Impeller Dia. (mm)|
Standard Type Extension Type
|NO.||Parts Name||NO.||Parts Name|
|3||Bearing Housing||11||Pump Casing|
|4||Bearing Spacer||12||Lower Strainer|
|8||Strainer||16||Middle Support Part|
Over 20 years’ experience in pumps.
Various pump types.
Wear resistant materials.
Specialized Test Equipment.
Large quantity spare parts.
Anti-rust treatment casting.
Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…
Product detail pictures:
We're committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for Factory Outlets 250TV-SP Sump Pump to Belgium Factories, The product will supply to all over the world, such as: Casablanca , Sao Tome and Principe , Cambodia , By integrating manufacturing with foreign trade sectors, we can provide total customer solutions by guaranteeing the delivery of right products to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
[DOWNLOADS] Slurry Transport Using Centrifugal Pumps
By Jerry 2016-9-19 11:11
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Carlos 2016-6-08 15:58