Factory made hot-sale L Metal Light Duty Slurry Pump to Guinea Factories
Introduction Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal. Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine partic...
Factory made hot-sale L Metal Light Duty Slurry Pump to Guinea Factories Detail:
Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal.
Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine particle size and weight concentration not more than 30%. The liner and impeller of this pump can be changeable ,eight with anti-abrasive metal or rubber material.
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Max. Power (kw)
|Clear Water Performance|
|Impeller. Dia. (mm)|
|20A – L||7.5||2.34-10.8||0.65-3||6-37||1400-3000||40||2.5-3||152.4|
|50B – L||15||11.5-76||3.2-21.1||8.5-46||1400-2800||62||2.5-5.5||190|
|75C – L||30||18-151||5-42||4-46.4||900-2400||57||3-6||229|
|100D – L||60||46.8-324||13-90||7-48.3||800-1800||64||2-6||305|
|150E – L||120||115-568.8||32-158||10.5-51.8||800-1500||60||2.5-6||381|
|200E – L||120||234-910||65-235||9.5-40||600-1100||64||3-6||457|
|250E – L||120||396-1425||110-396||8–30||500-800||77||2-10||550|
|300S – L||560||468-2538||130-708||8-60||400-950||79||2-10||653|
|350S – L||560||650-2800||180-780||10-59||400-840||81||3-10||736|
|400ST – L||560||756-3312||210-920||7-37.5||300-600||85||2-8||825|
|450ST – L||560||1080-4356||300-1210||9-40||300-550||87||3-10||933|
|550TU – L||1200||1980-7920||560-2200||10-50||250-475||86||4-10||1213|
|650TU – L||1200||2520-9108||700-2530||10-55||200-350||86||2-8||1425|
|50B – L(R)||15||9-61||2.5-17||3-32.4||1200-2600||48||2.75-4.5||190|
|75C – L(R)||30||28.8-154.8||8-43||9-43||1100-2300||60||3-5||229|
|100D – L(R)||60||54-288||15-80||12-38||800-1600||65||2.5-5.5||305|
|150E – L(R)||120||72-576||20-160||4-38||800-1300||65||2.5-5.5||381|
|250E – L(R)||120||396-1425||110-396||8-30||500-800||77||2-10||550|
|300S – L(R)||560||432-1900||120-528||7-41||400-800||81||3-8||653|
|350S – L(R)||560||720-2844||200-790||10-41||400-700||86||3-7||736|
|400ST – L(R)||560||720-3312||200-920||7-51||300-700||80||2-10||825|
|450ST – L(R)||560||1008-4356||280-1210||9-48||300-600||80||2-9||933|
|550TU – L(R)||1200||1980-7920||560-2200||10-50||250-475||86||4-10||1213|
|650TU – L(R)||1200||2520-9108||700-2530||10-39||200-350||86||2-8||1425|
1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point).
2. NPSH: appropriate to point Q recommended at highest speed
L(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for Factory made hot-sale L Metal Light Duty Slurry Pump to Guinea Factories, The product will supply to all over the world, such as: Russian Federation , Ecuador , Philippines , With top quality products, great after-sales service and warranty policy, we win trust from many overseas partner, many good feedbacks witnessed our factory's growth. With full confidence and strength, welcome customers to contact and visit us for future relationship.
YX series numerical control liquid filling machine uses micro-computer to control the mini-pump on filling time and the rotation rate of electric motor so that the machine can fill the liquid fluently and at high accuracy.It is widely used in medical,chemistry,food,bervage,oil and cosmetics,etc.It is suitable for filling low-viscous liquid without pellets.
Separated with the electric motor,the pump is made of a variety of anti-corrosion imported material.There is no mechanical metal part or abrasion inside the pump.The pump can stand oil,heat,acid,alkali,abrasion and chemical products.This pump integrates the advantage of self-suck pump and chemical pump.It can self suck,heat protect,stable working and continuous idle or load operate for long time.
Characteristics on model YX-I magnetic pump 5L semi automatic liquid filling equipment small Machine de remplissage liquide:
1.Imported single-chip control,high efficiency,low power consumption
2.Automatic counting,control the filling quantity effectively.
3.LCD display,touch screen panel is easy to operate.
4.Filling Accuracy is high,precise volume.
5.Wide voltage use range.
6.Product working performance is stable,long use life.
7.Self-suck function,don’t need to pour.
8.Pump can stand the acid and alkali.
10.Reasonable construction design,stainless steel shelf,meed GMP requirement.
Basic parameter of model YX-I magnetic pump 5L semi automatic liquid filling equipment small Machine de remplissage liquide:
Filling Range 5ml-unlimited filling (adjustable)
Max Power Rate 80W
Mainframe Size 350*320*220mm
Mainframe Weight 22kg
Max Flowing Rate More than 2 L/min
Overall Dimension 360*340*220mm
Pump Quantity 1
For more information about the various machines filling packing equipments like model YX-I magnetic pump 5L semi automatic liquid filling equipment Machine de remplissage liquide from our superb cosmetic machinery factory,plz browse our another website business video http://youtube.com/user/mrjackdu007 as well as follow PENGLAI INDUSTRIAL CORP business website http://penglaichina.com
Contact person :shirley Wang
Mobile/what’s up :0086 15054536180
This kind of egg tray making machine can produce :
(1) Agricultural pulp trays for packing of fruit, eggs and earthenware bowls
(2) Industrial pulp trays for packing of bottles, electrical appliances for the farming industry, mobile phones etc.
Our egg tray machine has four parts:Pulping system,forming system,drying line and packing parts.
Paper Pulp Making System :
Paper Pulp Making System is mainly comprised of hydrapulpter, pulp pump, multi-function refiner machine, stirrer, control cabinet,ect.
Worker feed the waste paper and water into the hydrapulper ,when the hydrapulper crush the paper into pulp then will flow into the pulp pool ,at same time workers feed some water into the pulp pool .The paper pulp will be processed by the pulp refiner machine when the proportion is ok then can start the forming machine .
Egg tray&box forming system:
This part mainly is the egg tray forming machine.We could produce the forming mould and transfering mould based on our customers request.The material of the mould could be Aluminum,Resin,Plastic.This part mainly include forming mould,transfering mould,compressor,vacuum tank,vacuum pump,self-aborsorbing pump,Air Tank etc.
When the No. 1 worker prepare the pulp ,No.2 worker will check the machine to confirm everything is ok ,the connection ,motor ,mould etc. and pre-heat the drying line .When pulp is ready then turn on the machine .At the beginning stage the worker will adjust the machine into best condition.
This is the very important in the all of line. When the egg tray be made over by the forming machine, the egg tray will be put on the drying line by transfering mould,they will across the drying channel, then you can get the dry tray!
This part mainly includes blower,burner,chain board,electric cabinet etc
As to the drying line,we could make single drying line and multi-layer drying line(4/6) in accordance with customers’ request.
This is the last step, when we get the finished tray from the drying line, we can count them automatically and then pack them.
The Pulp Tray Machine replaces the traditional plastic foam packing materials, which caused much white pollution.
It successfully solves the white pollution caused by traditional EPS foam packing, and raises the quality of the inner lining packaging of both fruits and industrial products. It has a positive effect on the world wide call for green packaging material, and lays the basis for the export of our domestic fruits and industrial products, at the same time raising the competitiveness of the Chinese fruit and industrial on the world market.
By Caroline 2015-11-26 14:48
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Andrew 2016-8-15 19:56