Factory For TL(R)Series FGD Pump for Kuwait Manufacturer

Factory For
 TL(R)Series FGD Pump  for Kuwait Manufacturer

Short Description:

Introduction Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD. Samples 600X-TLR: The diameter of discharge: 600mm. bearing lubr...


Product Detail

Product Tags

Related Video

Feedback (2)

We're going to commit ourselves to giving our esteemed buyers using the most enthusiastically considerate solutions for , , , Our concept would be to assist presenting the confidence of each prospective buyers while using the offering of our most honest service, as well as right merchandise.
Factory For TL(R)Series FGD Pump for Kuwait Manufacturer Detail:

Introduction

Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD.

Samples

600X-TLR: The diameter of discharge: 600mm. bearing lubricating type: thin oil, rubber liner.

700X-TL: The diameter of discharge:700mm, bearing lubricating type: thin oil, metal liner.

Features

  1. CFD flowing simulating analysis technology is adopted on wetted parts of pump, it has a reliable property and high operational efficiency.
  2. To adjust bearing assembly can change impeller position in volute, it can keep pump unit in a state of high efficient operation.
  3. The pump is back pull-out construction, it has easy construction and simplifies maintenance. It can be disassembled without dismantling suction & discharge pipes.
  4. Double rows taper roller bearings are fitted on pump end, roller bearings are fitted on drive end. Bearings are lubricated by oil which can modify bearing working condition and increase wear life of bearings.
  5. Mechanical seal adopted is special for cartridge mechanical seal of FGD process.

Technical Parameters

 Pump   Model    

       Capacity          Q  (m3/h)

       Head          H (m)

    Speed          n (r/min)

    Max.Eff.    (%)

        NPSH         (m)

    Outlet Dia./  Inlet Dia.     (mm)

 
 
1000X- TL(R)

10440

15

485

89

7.0

1000/1200

 
900X-TL(R)

15000

30

485

90

8.5

900/1000

 
800X-TL(R)

9360

31

485

90

7.0

800/900

 
700X-TL(R)

6840

26

485

87

6.0

700/800

 
600X-TL(R)

6300

25.5

620

88

5.5

600/700

 
500X-TL(R)

3750

25

725

85

5.0

500/500

 
400X-TL(R)

2500

25

725

83

5.0

400/450

 
350X-TL(R)

1600

25

960

82

4.5

350/400

 
300X-TL(R)

720-1800

15-40

450-800

60-79

2-5.5

300/350

 
250X-TL

540-1800

20-75

450-900

75-86

2-4

250/300

 
200R-TL(R)

360-1000

10-40

450-980

80-85

2-5.5

200/250

 
150R-TL(R)

200-800

15-60

600-1200

65-80

2-5.5

150/200

 
150E-TL(R)

150-540

12-40

800-1480

50-67

2.5-6

150/200

 
100E-TL(R)

70-360

15-55

800-1600

50-68

2-6.5

100/150

 
100D-TL(R)

20-220

10-40

800-1800

50-65

2-4.5

100/150

 
75D-TL(R)

40-160

10-50

1000-2200

50-72

2-6

75-100

 
75CC-TL(R)

30-130

8-45

900-2400

40-57

2-6.5

75/100

 
50D-TL

70-140

25-85

850-1450

30-47

2-6.5

50/75

 
50CC-TL(R)

40-85

12-64

1300-2700

40-58

2-10

50/75

 
50BB-TL(R)

16-75

9-44

1400-2800

35-62

2-5.5

50/75

 
40BB-TL(R)

32-72

6-58

1200-3200

30-45

2-8

40/50

 
20CC-TL

16-34

25-92

1400-2200

16-20

2-4.5

20/40

 
20BB-TL(R)

12.5-28

6-68

1200-3800

20-40

2-4.5

20/40

 
20A-TL(R)

2.5-10

6-37

1400-3000

15-30

 

20/40

 

 

Constuction

TL web

 

Sheet One

  NO.  Name    Material NO.    Name  Material
1 Support  Cast Iron 7 Suction Cover  duplex phase stainless white iron
2      Impeller Release Collar Stainless Steel 8 Impeller   duplex phase stainless white iron
3 Shaft Sleeve ZG0Cr18Ni12Mo2Ti 9 Cover Plate QT500-7 Ductile iron
4      Mechanical Seal  Hard Alloy 10 Frame Plate Liner Natural Rubber+A3
5 Frame plate Liner Insert  Natural Rubber+A3 11 Frame Plate QT500-7 Ductile iron
6 Cover Plate Liner  Natural Rubber+A3 12 Adaptor Plate QT500-7 Ductile iron

Sheet Two

 NO.      Name   Material  NO.   Name    Material
1 Support  Cast Iron 7 Throatbushing     duplex phase stainless white iron
2      Impeller Release Collar  Stainless Steel 8 Impeller  duplex phase stainless white iron
3 Shaft Sleeve ZG0Cr18Ni12Mo2Ti 9 Suction Cover    QT500-7+Rubber
4  Mechanical Seal  Hard Alloy 10     Cover Plate QT500-7 Ductile Iron
5 Frame plate Liner insert duplex phase stainless white iron 11 Frame Plate QT500-7 Ductile Iron
6 Volute liner duplex phase stainless white iron 12 Adaptor Plate QT500-7 Ductile Iron

Material Adopted

Our company developed a kind of new material duplex phase stainless white iron (A49)on FGD device specially. The material has anti-corrosive property of duplex stainless steel and anti-abrasive property of high chrome white iron so that it has remarkable anti-abrasive and anti-corrosive property in FGD process.

Pump casing, pump cover and adaptor plate are bearing pressure parts which are made of ductile iron.

Rubber lined pump: impeller, suction cover/front liner insert are made of duplex phase stainless white iron. Front liner, back liner, back liner insert material is natural rubber which has good anti-corrosive property with light weight, low cost.

Metal lined pump: impeller, volute liner, throatbushing ,frame plate liner insert are made of duplex stainless white iron. Suction cover is made of ductile iron with rubber stuck.

 

TL 3D

 

Advantages

  • The distinct characteristic of our FGD engineering pump is double-casing and rubber lined technology. Double-casing structure refers that the pump body is divided into outer pump shell and inner lining. The former bears pressure and insulates slurry. The latter contact abrasive and corrosive slurry. we only need to replace the worn out inner liner.
  • FGD engineering pump is mainly used to transport limestone and gypsum slurry. This requires the wet part performance well not only in anti-abrasive but also in anti-corrosive. Therefore, the wet parts (such as: impeller, volute liner and frame plate insert, etc.) adopt A49 combined with rubber material. The engineering practice shows that the  service life of components made by ours is triple or even higher than the traditional Cr30A products or duplex stainless steel pump.
  • A49 material is a kind of abrasive-resistant and corrosive-resistant alloy widely used for FGD projects in the world , the main composition include chromium 28-30%,  molybdenum 2-3%, nickel%, carbon 1%, copper is less than or equal to 2%. Corrosive-resistance characteristic: this is given by the austenitic element. In the 70 degree sulfuric acid solution which contains chloride 100000ppm and pH value of 4, the corrosion rate of is 0.5mm/a. In the 60 degree solution which contains 5% nitric, the corrosion rate is 0.5mm/a. In the sodium hydroxide solution at 80 degree and pH value of 13, the corrosion rate is 0.5mm/a. Wear-resistance characteristic: The abrasion performance is given by the chromium carbide on the grain boundary and secondary carbon compounds precipitated on austenite bodies. The abrasion performance is equal to A05, GLH-5, Ni-1.
  • TL (R) series FGD engineering pump has the characteristics of uniform parts specifications, widely used in the market, fast delivery, long service time, convenient installation, low cost and so on.

Product detail pictures:

Factory For
 TL(R)Series FGD Pump  for Kuwait Manufacturer detail pictures


Always customer-oriented, and it's our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for Factory For TL(R)Series FGD Pump for Kuwait Manufacturer, The product will supply to all over the world, such as: Mozambique , Bangladesh , Egypt , Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.


  • New Honda iGX Jetwave Hire Hornet High Pressure Water Cleaner Introduction and Demonstration



    single head double heads magnetic pump high precision liquid filling máquina de rellenar líquida designed and manufactured by our engineer team in cosmetic&food&pharma making and packaging machinery is widely used in the daily chemical industry like single head double heads magnetic pump high precision liquid filling máquina de rellenar líquida and such like.We as a famous manufacturer moreover can design and produce the packaging machine according to the special requirements from customers.
    Magnetic Pump Manual Bottle Filling Machine for Other Non-granulated Liquid/ Antifreeze Filler
    Introduction:
    Application:
    A. Can fill oil, juice, perfume, ink, water, etc for all containers such as bottles, jars, cans, etc
    B. Widely used in cosmetic, drinks, chemical, medical, food industry etc, which can highly improve productivity and product quality.
    Packaging including:
    A. main machine x 1pcs
    B. silicon pipe x 1meter
    C. glass value x 2pcs
    D. fuse x 3pcs
    E. one-off injector x 1pcs
    F. user manual x 1pcs
    G. quality card x 1pcs

    Scope of Application of Magnetic Pump Manual Bottle Filling Machine for Other Non-granulated Liquid/ Antifreeze Filler:
    The magnetic pump manual bottle filling machine for other non-granulated liquid/ antifreeze filler can be used in the vast types of liquid filling, including high viscosity liquids, such as: pharmaceuticals, chemicals, oils, cosmetics, food and other non-granulated liquid, with high precision, suitable for laboratory use.
    Specifications of Magnetic Pump Manual Bottle Filling Machine for Other Non-granulated Liquid/ Antifreeze Filler:
    Mode: YX-II-I
    Rated Voltage 220V, 50/60HZ
    Max. Power 38w
    Machine size 41*33*27cm
    N.W. / G.W. 16KG / 20KG
    Packing size 60*52*42cm
    Tolerance -0.5%~+1%
    Filling speed 1.44L/min
    Features of Magnetic Pump Manual Bottle Filling Machine for Other Non-granulated Liquid/ Antifreeze Filler:
    1. Adopts world-famous frequency conversion controller and imported high-precision multi-circle potentiometer & lockable dial, which makes the flow stable and accurate with a tolerance of -0.5%~+1%
    2. The magnetic pump manual bottle filling machine for other non-granulated liquid/ antifreeze filler is adopted the imported magnetic 316L stainless steel gear pump, with reliable quality and longevity
    3. Small size, easy to operate; convenient for cleaning and sterilizing
    4. Full function, automatic or semi-automatic available; can be used in production line
    5. The magnetic pump manual bottle filling machine for other non-granulated liquid/ antifreeze filler can be equipped with flexible filling nozzles; normally equipped with single nozzle or double nozzles
    6. The magnetic pump manual bottle filling machine for other non-granulated liquid/ antifreeze filler can fill most types of liquids such as oil, beverage, perfume, water, ink, etc
    7. large filling range from 5ml to 10000ml, can be conveniently regulated
    8. complete 304 stainless steel mold, which reveals elegant and natural
    9. micro-computer control, digital display, clear and easy to use
    Others:
    Lead time: within 5 days
    Warranty: one year for whole machine, life time technical support
    packaging: strengthen carton and foam

    Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like single head double heads magnetic pump high precision liquid filling máquina de rellenar líquida,please email via jackdu999@yahoo.com or browse our website http://penglaichina.com.
    Follow us on twitter:http://www.twitter.com/jackdu007
    Like us on facebook:http://www.facebook.com/jackdu999
    Skype us by :turnanewleaf
    Call us via:0086-15811882441

    This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.

    5 Stars By Jerry 2016-9-19 11:11
    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!




















    5 Stars By Jack 2016-2-14 16:32