Factory Cheap 250TV-SP Sump Pump for Zurich Factories
Introduction Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry wh...
Factory Cheap 250TV-SP Sump Pump for Zurich Factories Detail:
Type SPSP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle .
The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
– Metal or rubber lined wet parts.
– Vertical construction, less Installation Space.
– Equipped with replaceable shaft protection sleeve.
– Double suction semi-open impeller.
– No submerged bearing or packing.
– Recessed impeller option passes over-sized material.
– Agitator option keeps solids in suspension.
– Can be run in insufficient suction duties.
– Smooth and stable operation.
– Special materials or casting for specific liquid.
|Pump Model||Allowable Max.Power (kw)||Clear Water Performance|
|Capacity Q||Head H (m)||Speed n (r/min)||Max.Eff. (%)||Impeller Dia. (mm)|
Standard Type Extension Type
|NO.||Parts Name||NO.||Parts Name|
|3||Bearing Housing||11||Pump Casing|
|4||Bearing Spacer||12||Lower Strainer|
|8||Strainer||16||Middle Support Part|
Over 20 years’ experience in pumps.
Various pump types.
Wear resistant materials.
Specialized Test Equipment.
Large quantity spare parts.
Anti-rust treatment casting.
Sump pumps are mainly used for handing corrosive, coarse particles and high density slurries, and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: mineral processing pump, mill discharge slurry pump, booster pump, feeding pump, tailing pump, transfer pump, de-watering screen pump, pressure pump, concentrate pump…
Product detail pictures:
Gaining client pleasure is our company's aim without end. We are going to make excellent efforts to create new and top-quality goods, meet your special requirements and provide you with pre-sale, on-sale and after-sale companies for Factory Cheap 250TV-SP Sump Pump for Zurich Factories, The product will supply to all over the world, such as: Grenada , Sierra Leone , Liverpool , With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.
In real life, materials accelerated at high speeds and exposed to rain conditions are degraded due to repeated impact of water droplets. This effect is very common in the leading edge of wind turbines or in airplane wings. The erosion of the leading edge of wind turbine blades reduces blade aerodynamic efficiency and power output. In order to extent materials life in real conditions, the Thermal Spray Center in the University of Barcelona has developed the jet erosion test. This test measures the resistance of any material to repeated water impact and will help in the development of new protecting coatings in the wind and aerospace industry.
By Michelle 2015-11-15 17:27
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Claire 2016-6-18 15:41