Factory best selling DT Series FGD Pump for Swansea Factory
Short Description:
Product Description Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump. The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pu...
Product Detail
Product Tags
Related Video
Feedback (2)
Factory best selling DT Series FGD Pump for Swansea Factory Detail:
Product Description
Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump.
The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pump, recycling pump, sump pump and so on.
Structure Form
Series of DT FGD pump is a horizontal, single casing, single stage, single suction, pedestal or suspension structure pump.
1. Impeller 5. Frame plate liner insert 9. Coupling
2. Volute liner 6. Stuffing box 10. Base plate
3. Suction short pipe 7. Mechanical seal
4. Discharge short pipe 8. Frame
Series of LT FGD pump is vertical, single casing pump. Adding suction pipe can meet the requirements of various operating conditions.
1. Impeller 5. Left support plate 9. Coupling
2. Volute liner 6. Bearing housing 10. Discharge pipe
3. Frame plate liner insert 7. Motor support 11. Right support plate
4. Column 8.Motor 12. Suction pipe
Technical Parameters (DT)
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | Particle Max. Size Handled Occasionally (mm) | Pump Weight (kg) | ||||
Capacity Q | Head H (m) |
Speed n (r/min) | Max.Eff. (%) |
(NPSH)r (m) |
||||
(m3/h) | ||||||||
900DT-F110 | 1600 | 4907-14076 | 8.5-32.7 | 300-490 | 88.3 | 6.5 | 96 | 11800 |
800DT-A90 | 900 | 4104-10690 | 7.8-27.8 | 400-595 | 86.4 | 4.3 | 88 | 7101 |
700DT-A90 | 900 | 3551-8988 | 10.0-33.8 | 400-595 | 86.7 | 5.6 | 68 | 6030 |
700DT-A83 | 630 | 2677-6491 | 8.7-30.2 | 400-595 | 85.9 | 6.0 | 70 | 6002 |
700DT-B78 | 560 | 3378-7200 | 10.0-21.8 | 400-595 | 84.7 | 4.3 | 65 | 5136 |
600DT-A82 | 500 | 1664-5600 | 5.2-27.8 | 300-595 | 88.3 | 2.2 | 152 | 4900 |
500DT-A76 | 400 | 1555-3881 | 9.9-27.9 | 450-595 | 76.8 | 4.5 | 58 | 3512 |
500DT-A70 | 500 | 1908-4399 | 9.3-32.5 | 490-742 | 76.0 | 6 | 55 | 3100 |
400DT-A65 | 400 | 1134-3330 | 8.8-31.1 | 490-472 | 80.1 | 5.2 | 60 | 3200 |
350DT-A78 | 500 | 720-2865 | 11.6-51.1 | 400-720 | 78.0 | 3.5 | 104 | 3700 |
300DT-A60 | 400 | 574-2384 | 8.7-52.0 | 490-989 | 81.1 | 4.3 | 96 | 2790 |
250DT-A75 | 560 | 300-1480 | 20.8-97.5 | 490-980 | 77.5 | 3.0 | 72 | 3191 |
250DT-A45 | 90 | 221-804 | 5.0-27.0 | 490-980 | 68.2 | 6.5 | 56 | 1321 |
200DT-B45 | 90 | 136-639 | 5.5-30.1 | 490-990 | 80.8 | 2.0 | 51 | 1750 |
150DT-A60 | 450 | 156-704 | 28.9-150.0 | 700-1480 | 70.7 | 2.1 | 39 | 1657 |
150DT-B55 | 132 | 139-630 | 11.3-53.7 | 490-990 | 78.1 | 2.3 | 56 | 1540 |
150DT-A50 | 90 | 62-279 | 9.3-44.6 | 490-980 | 65.7 | 2.1 | 30 | 1470 |
150DT-A40 | 132 | 122-503 | 11.2-61.2 | 700-1490 | 73.1 | 2.6 | 40 | 830 |
100DT-A60 | 220 | 71-305 | 29.1-147.0 | 700-1480 | 57.9 | 2.4 | 18 | 890 |
100DT-A50 | 160 | 85-360 | 20.5-100.2 | 700-1480 | 69.6 | 2.5 | 34 | 975 |
100DT-A45 | 90 | 47-228 | 14.8-83.5 | 700-1480 | 58.7 | 2.2 | 22 | 810 |
100DT-A40 | 75 | 61-268 | 12.0-61.0 | 700-1480 | 70.4 | 1.7 | 29 | 620 |
100DT-A35 | 75 | 77-323 | 8.8-45.9 | 700-1480 | 73.2 | 1.9 | 42 | 550 |
80DT-A36 | 37 | 41-167 | 8.9-47.1 | 700-1480 | 62.4 | 1.5 | 16 | 480 |
65DT-A40 | 55 | 34-159 | 11.5-60.1 | 700-1480 | 62.1 | 2.1 | 16 | 490 |
65DT-A30 | 22 | 21-99 | 7.0-35.6 | 700-1470 | 54.6 | 2.2 | 19 | 260 |
50DT-A50 | 90 | 27-111 | 22.3-110.7 | 700-1480 | 45.1 | 3 | 13 | 856 |
50DT-A45 | 55 | 21.6-93.6 | 15.2-81.0 | 700-1480 | 48.4 | 3.6 | 9.5 | 849 |
50DT-B40 | 37 | 24.5-99.5 | 12.0-60.7 | 700-1470 | 55.0 | 3.1 | 14 | 490 |
50DT-A30 | 18.5 | 16-78 | 5.8-35.1 | 700-1460 | 48.5 | 0.8 | 16 | 210 |
40DT-A25 | 45 | 16.8-74.7 | 13.7-88.6 | 1400-2950 | 42.5 | 2.6 | 9 | 185 |
40DT-B20 | 15 | 7.9-37.1 | 10.7-57.5 | 1400-2930 | 53.0 | 0.9 | 7 | 160 |
40DT-A19 | 15 | 7.8-34.9 | 12.3-57.1 | 1400-2930 | 58.8 | 1.2 | 11 | 173 |
40DT-A17 | 7.5 | 4.6-23.4 | 9.2-44.6 | 1400-2900 | 52.4 | 2.5 | 11 | 127 |
25DT-A25 | 4 | 4.7-19.9 | 3.3-21.6 | 700-1400 | 38.0 | 3.3 | 5 | 107 |
25DT-A15 | 5.5 | 4.4-19.3 | 6.2-34.4 | 1390-2900 | 41.8 | 1.3 | 8 | 89 |
Note:1.(NPSH)r:Value of the second speed. 2.Normal partical size: 56% of allowable occasional particle Max. size. |
Applicable Condition
PH value: 2.5~13
Chloride ion concentration: ≤60000ppm
Concentration weight: ≤60%
Medium temperature: ≤120℃
Performance and material characteristics
- High efficiency, long service life and reliable operation.
- The wet parts are made of low carbon stainless steel material.
- Low carbon stainless steel mainly consisting of ferritic has excellent resistance to chloride stress corrosion cracking and higher mechanical strength.
- Less hydraulic friction, the efficiency is higher than the same parameters of the metal pump about 3%.
- Metal pump is easy to control the geometric dimension and high volume efficiency. The pump parts is with high surface and small clearance. The overall efficiency of 5% higher than non-metal pump.
- The wet parts has long-service life and long-term shear wear ability. Shear sliding wear ability of metal protective plate is stronger than that of the common non-metallic materials.
- Dynamic abrasion resistance is 0.008-0.08mm every year, with high tensile strength. The pump performance can be maintained constant in the long-term abrasion conditions
Seal Type
All seal type adopt mechanical seal, divided into a water and anhydrous type.
Water type
Double face mechanical seal with double sets of friction pairs, reliable operation, can achieve the effect of liquid leakage.
Anhydrous type
The self washing mechanical seal with no water medium has the advantages of unique structure, high operation reliability and good water saving effect.
Product detail pictures:
Bear "Customer 1st, Good quality first" in mind, we work closely with our prospects and supply them with efficient and professional services for Factory best selling DT Series FGD Pump for Swansea Factory, The product will supply to all over the world, such as: Borussia Dortmund, Kuwait, Lebanon, Our company has abundant strength and possesses a steady and perfect sales network system. We wish we could establish sound business relationships with all customers from at home and abroad on the basis of mutual benefits.
Dynapro VSP’s are recognized for their heavy duty construction, long service life, ease of maintenance and overall dependability.
Our plant used to manufacture the Galigher VSP prior to Weir purchasing Galigher.
Today, we manufacture the Dynapro VSP to today’s standards and quality. You can be sure you’re getting an OEM product without the OEM price tag. Visit www.dynaproequipment.com for more details.
By Eric 2015-12-22 19:23
We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
By Stephanie 2016-10-19 13:09