Personlized Products DT Series FGD Pump to French Factory
Short Description:
Product Description Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump. The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pu...
Product Detail
Product Tags
Related Video
Feedback (2)
Personlized Products DT Series FGD Pump to French Factory Detail:
Product Description
Based on the successful design experience in manufacturing ZJ series slurry pumps and absorbed home and abroad advanced technology, we designs and manufactures DT and LT type pump, a special FGD engineering pump.
The max flow range can be up to 12000m3/h, the head is generally less than 100m. This type pump apply to all the desulfurization system, which can be used as a slurry circulating pump in large absorption tower and limestone slurry pump, gypsum slurry discharge pump, recycling pump, sump pump and so on.
Structure Form
Series of DT FGD pump is a horizontal, single casing, single stage, single suction, pedestal or suspension structure pump.
1. Impeller 5. Frame plate liner insert 9. Coupling
2. Volute liner 6. Stuffing box 10. Base plate
3. Suction short pipe 7. Mechanical seal
4. Discharge short pipe 8. Frame
Series of LT FGD pump is vertical, single casing pump. Adding suction pipe can meet the requirements of various operating conditions.
1. Impeller 5. Left support plate 9. Coupling
2. Volute liner 6. Bearing housing 10. Discharge pipe
3. Frame plate liner insert 7. Motor support 11. Right support plate
4. Column 8.Motor 12. Suction pipe
Technical Parameters (DT)
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | Particle Max. Size Handled Occasionally (mm) | Pump Weight (kg) | ||||
Capacity Q | Head H (m) |
Speed n (r/min) | Max.Eff. (%) |
(NPSH)r (m) |
||||
(m3/h) | ||||||||
900DT-F110 | 1600 | 4907-14076 | 8.5-32.7 | 300-490 | 88.3 | 6.5 | 96 | 11800 |
800DT-A90 | 900 | 4104-10690 | 7.8-27.8 | 400-595 | 86.4 | 4.3 | 88 | 7101 |
700DT-A90 | 900 | 3551-8988 | 10.0-33.8 | 400-595 | 86.7 | 5.6 | 68 | 6030 |
700DT-A83 | 630 | 2677-6491 | 8.7-30.2 | 400-595 | 85.9 | 6.0 | 70 | 6002 |
700DT-B78 | 560 | 3378-7200 | 10.0-21.8 | 400-595 | 84.7 | 4.3 | 65 | 5136 |
600DT-A82 | 500 | 1664-5600 | 5.2-27.8 | 300-595 | 88.3 | 2.2 | 152 | 4900 |
500DT-A76 | 400 | 1555-3881 | 9.9-27.9 | 450-595 | 76.8 | 4.5 | 58 | 3512 |
500DT-A70 | 500 | 1908-4399 | 9.3-32.5 | 490-742 | 76.0 | 6 | 55 | 3100 |
400DT-A65 | 400 | 1134-3330 | 8.8-31.1 | 490-472 | 80.1 | 5.2 | 60 | 3200 |
350DT-A78 | 500 | 720-2865 | 11.6-51.1 | 400-720 | 78.0 | 3.5 | 104 | 3700 |
300DT-A60 | 400 | 574-2384 | 8.7-52.0 | 490-989 | 81.1 | 4.3 | 96 | 2790 |
250DT-A75 | 560 | 300-1480 | 20.8-97.5 | 490-980 | 77.5 | 3.0 | 72 | 3191 |
250DT-A45 | 90 | 221-804 | 5.0-27.0 | 490-980 | 68.2 | 6.5 | 56 | 1321 |
200DT-B45 | 90 | 136-639 | 5.5-30.1 | 490-990 | 80.8 | 2.0 | 51 | 1750 |
150DT-A60 | 450 | 156-704 | 28.9-150.0 | 700-1480 | 70.7 | 2.1 | 39 | 1657 |
150DT-B55 | 132 | 139-630 | 11.3-53.7 | 490-990 | 78.1 | 2.3 | 56 | 1540 |
150DT-A50 | 90 | 62-279 | 9.3-44.6 | 490-980 | 65.7 | 2.1 | 30 | 1470 |
150DT-A40 | 132 | 122-503 | 11.2-61.2 | 700-1490 | 73.1 | 2.6 | 40 | 830 |
100DT-A60 | 220 | 71-305 | 29.1-147.0 | 700-1480 | 57.9 | 2.4 | 18 | 890 |
100DT-A50 | 160 | 85-360 | 20.5-100.2 | 700-1480 | 69.6 | 2.5 | 34 | 975 |
100DT-A45 | 90 | 47-228 | 14.8-83.5 | 700-1480 | 58.7 | 2.2 | 22 | 810 |
100DT-A40 | 75 | 61-268 | 12.0-61.0 | 700-1480 | 70.4 | 1.7 | 29 | 620 |
100DT-A35 | 75 | 77-323 | 8.8-45.9 | 700-1480 | 73.2 | 1.9 | 42 | 550 |
80DT-A36 | 37 | 41-167 | 8.9-47.1 | 700-1480 | 62.4 | 1.5 | 16 | 480 |
65DT-A40 | 55 | 34-159 | 11.5-60.1 | 700-1480 | 62.1 | 2.1 | 16 | 490 |
65DT-A30 | 22 | 21-99 | 7.0-35.6 | 700-1470 | 54.6 | 2.2 | 19 | 260 |
50DT-A50 | 90 | 27-111 | 22.3-110.7 | 700-1480 | 45.1 | 3 | 13 | 856 |
50DT-A45 | 55 | 21.6-93.6 | 15.2-81.0 | 700-1480 | 48.4 | 3.6 | 9.5 | 849 |
50DT-B40 | 37 | 24.5-99.5 | 12.0-60.7 | 700-1470 | 55.0 | 3.1 | 14 | 490 |
50DT-A30 | 18.5 | 16-78 | 5.8-35.1 | 700-1460 | 48.5 | 0.8 | 16 | 210 |
40DT-A25 | 45 | 16.8-74.7 | 13.7-88.6 | 1400-2950 | 42.5 | 2.6 | 9 | 185 |
40DT-B20 | 15 | 7.9-37.1 | 10.7-57.5 | 1400-2930 | 53.0 | 0.9 | 7 | 160 |
40DT-A19 | 15 | 7.8-34.9 | 12.3-57.1 | 1400-2930 | 58.8 | 1.2 | 11 | 173 |
40DT-A17 | 7.5 | 4.6-23.4 | 9.2-44.6 | 1400-2900 | 52.4 | 2.5 | 11 | 127 |
25DT-A25 | 4 | 4.7-19.9 | 3.3-21.6 | 700-1400 | 38.0 | 3.3 | 5 | 107 |
25DT-A15 | 5.5 | 4.4-19.3 | 6.2-34.4 | 1390-2900 | 41.8 | 1.3 | 8 | 89 |
Note:1.(NPSH)r:Value of the second speed. 2.Normal partical size: 56% of allowable occasional particle Max. size. |
Applicable Condition
PH value: 2.5~13
Chloride ion concentration: ≤60000ppm
Concentration weight: ≤60%
Medium temperature: ≤120℃
Performance and material characteristics
- High efficiency, long service life and reliable operation.
- The wet parts are made of low carbon stainless steel material.
- Low carbon stainless steel mainly consisting of ferritic has excellent resistance to chloride stress corrosion cracking and higher mechanical strength.
- Less hydraulic friction, the efficiency is higher than the same parameters of the metal pump about 3%.
- Metal pump is easy to control the geometric dimension and high volume efficiency. The pump parts is with high surface and small clearance. The overall efficiency of 5% higher than non-metal pump.
- The wet parts has long-service life and long-term shear wear ability. Shear sliding wear ability of metal protective plate is stronger than that of the common non-metallic materials.
- Dynamic abrasion resistance is 0.008-0.08mm every year, with high tensile strength. The pump performance can be maintained constant in the long-term abrasion conditions
Seal Type
All seal type adopt mechanical seal, divided into a water and anhydrous type.
Water type
Double face mechanical seal with double sets of friction pairs, reliable operation, can achieve the effect of liquid leakage.
Anhydrous type
The self washing mechanical seal with no water medium has the advantages of unique structure, high operation reliability and good water saving effect.
Product detail pictures:
Our firm promises all consumers with the first-class products as well as most satisfying post-sale services. We warmly welcome our regular and new consumers to join us for Personlized Products DT Series FGD Pump to French Factory, The product will supply to all over the world, such as: Tanzania, Mauritius, Manchester, We solution have passed through the national skilled certification and been well received in our key industry. Our specialist engineering team will often be ready to serve you for consultation and feedback. We've been able to also provide you with no cost samples to meet your needs. Best efforts are going to be produced to supply you the very best service and solutions. For anyone who is considering our business and solutions, please speak to us by sending us emails or get in touch with us right away. As a way to know our items and enterprise. lot more, you'll be able to come to our factory to find out it. We'll constantly welcome guests from around the globe to our firm. o build enterprise. elations with us. You should really feel absolutely free to make contact with us for small business and we believe we'll share the top trading practical experience with all our merchants.
Test pitch of the Outwell Hornet XL using the Bravo BP12 electric pump powered by recreational battery fully inflated in 2 minutes
No other END OF PIVOT SPRINKLER works in the low pressure range of 15-30 PSI and provides up to 10 additional irrigated acres (on a 1/4 mile pivot). The perfect solution for low pressure pivots needing to irrigate extra acreage of corn, sugar beets, potatoes, rice and sugar cane.
Performance
• LOW PRESSURE (15-30 PSI / 1-2 bar)
- No booster pump required.
• UP TO 50′ (15 m) RADIUS
- Up to 10 acres (4.1 ha) irrigating full
circle on a ¼ mile (0.4 km) pivot.
• COST EFFECTIVE
- Costs 50% less than traditional brass
impacts.
- Irrigate more ground with less
money.
• VERSATILITY
- Operate full circle, corners only, or
as a secondary end gun.
• UNIFORMITY
- Fills in the pattern of high-volume
end guns.
• EFFICIENCY
- Low trajectory streams and large
droplets penetrate the wind and
resist evaporation and drift.
Features
• NELSON ROTATOR® TECHNOLOGY
- Field-proven reliability, 25+ years.
• WEAR-RESISTANT PLATE
- For abrasive end-of-system water.
• FOUR COLOR-CODED NOZZLES
- Match system gpm/acre.
• DURABLE CAST ALUMINUM BODY
• EASY TO INSTALL
- Standard 1 ¼” threads replace
brass impacts.
- Angle markers to help align the
sprinkler.
• EASY TO MAINTAIN
- Separate the nozzle from the body by
pulling a single pin
By Mike 2016-10-22 19:08
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Anne 2016-3-08 16:27