Special Design for L Metal Light Duty Slurry Pump for Philadelphia Manufacturer
Short Description:
Introduction Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal. Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine partic...
Product Detail
Product Tags
Related Video
Feedback (2)
Special Design for L Metal Light Duty Slurry Pump for Philadelphia Manufacturer Detail:
Introduction
Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal.
Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine particle size and weight concentration not more than 30%. The liner and impeller of this pump can be changeable ,eight with anti-abrasive metal or rubber material.
Advantages
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Type Notation
Technical Parameters
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) |
Max.Eff. (%) |
NPSH (m) |
Impeller. Dia. (mm) | |||
m3/h | l/s | |||||||
20A – L | 7.5 | 2.34-10.8 | 0.65-3 | 6-37 | 1400-3000 | 40 | 2.5-3 | 152.4 |
50B – L | 15 | 11.5-76 | 3.2-21.1 | 8.5-46 | 1400-2800 | 62 | 2.5-5.5 | 190 |
75C – L | 30 | 18-151 | 5-42 | 4-46.4 | 900-2400 | 57 | 3-6 | 229 |
100D – L | 60 | 46.8-324 | 13-90 | 7-48.3 | 800-1800 | 64 | 2-6 | 305 |
150E – L | 120 | 115-568.8 | 32-158 | 10.5-51.8 | 800-1500 | 60 | 2.5-6 | 381 |
200E – L | 120 | 234-910 | 65-235 | 9.5-40 | 600-1100 | 64 | 3-6 | 457 |
250E – L | 120 | 396-1425 | 110-396 | 8–30 | 500-800 | 77 | 2-10 | 550 |
300S – L | 560 | 468-2538 | 130-708 | 8-60 | 400-950 | 79 | 2-10 | 653 |
350S – L | 560 | 650-2800 | 180-780 | 10-59 | 400-840 | 81 | 3-10 | 736 |
400ST – L | 560 | 756-3312 | 210-920 | 7-37.5 | 300-600 | 85 | 2-8 | 825 |
450ST – L | 560 | 1080-4356 | 300-1210 | 9-40 | 300-550 | 87 | 3-10 | 933 |
550TU – L | 1200 | 1980-7920 | 560-2200 | 10-50 | 250-475 | 86 | 4-10 | 1213 |
650TU – L | 1200 | 2520-9108 | 700-2530 | 10-55 | 200-350 | 86 | 2-8 | 1425 |
50B – L(R) | 15 | 9-61 | 2.5-17 | 3-32.4 | 1200-2600 | 48 | 2.75-4.5 | 190 |
75C – L(R) | 30 | 28.8-154.8 | 8-43 | 9-43 | 1100-2300 | 60 | 3-5 | 229 |
100D – L(R) | 60 | 54-288 | 15-80 | 12-38 | 800-1600 | 65 | 2.5-5.5 | 305 |
150E – L(R) | 120 | 72-576 | 20-160 | 4-38 | 800-1300 | 65 | 2.5-5.5 | 381 |
250E – L(R) | 120 | 396-1425 | 110-396 | 8-30 | 500-800 | 77 | 2-10 | 550 |
300S – L(R) | 560 | 432-1900 | 120-528 | 7-41 | 400-800 | 81 | 3-8 | 653 |
350S – L(R) | 560 | 720-2844 | 200-790 | 10-41 | 400-700 | 86 | 3-7 | 736 |
400ST – L(R) | 560 | 720-3312 | 200-920 | 7-51 | 300-700 | 80 | 2-10 | 825 |
450ST – L(R) | 560 | 1008-4356 | 280-1210 | 9-48 | 300-600 | 80 | 2-9 | 933 |
550TU – L(R) | 1200 | 1980-7920 | 560-2200 | 10-50 | 250-475 | 86 | 4-10 | 1213 |
650TU – L(R) | 1200 | 2520-9108 | 700-2530 | 10-39 | 200-350 | 86 | 2-8 | 1425 |
Remark: 1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed |
Selection Chart
Application
L(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
Our firm has been concentrating on brand strategy. Customers' satisfaction is our best advertising. We also offer OEM provider for Special Design for L Metal Light Duty Slurry Pump for Philadelphia Manufacturer, The product will supply to all over the world, such as: Gambia, Malta, Morocco, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
Where to find https://www.amazon.com/dp/B000EDOSP6/?tag=gadgetidtrack1-20 Camco 41197 TST Orange Holding Tank Chemical – 1 gallon review. Discount: Camco 41197 TST Orange Holding Tank Chemical – 1 gallon.
We produce biomass pellet prod0uction line machines such as wood debarking machine , wood logs splitter, wood chipper, hammer mill crusher, straw bale crusher, grass cutter, dryer and cooler, pellet machine and briquette machine, various mixer, screener, biomass pellet stove, pellet packing machines and all conveyors e. c. t , for wood pellet machine, introduction as below :
1.wood pellet machine
can press high crude fiber biomass and chemical fertilizer materials into 2-8MM diameter pellets. it is specially fit for biomass waste from wheat straw or rice straw, corn stalk, rice husk , palm fiber ,palm shell or groundnut shell , very hard wood e.c.t, also can press fertilizer granules from animal manure, plant waste, chemical waste e.c.t ,before pelletizing , raw materials should crush into fine powder, humidity should control between 15%-20%.
2.wood pellet machine
adopts both common ring die pellet machine and flat die pellet machine advantages ,working principle is –roller assemble rotary, the ring die keep stable, producing high pressure and press very low adhesive biomass waste into high density pellets — 1.1-1.4ton/m3. pellet length can be adjusted
3.wood pellet machine contains hydraulic pump, which can adjust pressure between rollers and ring die to fit for different materials pressure ratio.
when adjusted to the fit pressure, pressure will keep stable automatically, but other supplier pellet press need to adjust pressure manually each time .
4.sawdust pellet machine also contains automatical lubricate spare parts oil systems , which can lubricate spare parts oil automatically—- such as rollers, vertical shaft ,gears, bearings ,but other common supplier pellet machine needs to add oil each four working hours, very trouble to operate. this technology got national patent
5.wood pellet machine adopts flat die pellet machine vertical feeding materials advantages , feed materials vertically and directly to pelletizing room , ring die and roller assemble works in horizontal type, but other supplier common ring die pellet machine only can feed materials from gear box side and its ring die works in vertical type, their feeding speed and working efficiency are both very low. Its spare parts can not produce large pressure, especially inner big shaft and bearings , if can not produce large pressure ,after long continuous hours , will be easily broken
6.wood pellet machine
has one ring die with two–layers : the top layer and bottom layer .when pellet machine works , Roller assemble will rotary ,toughing with ring die bottom layer ,
the ring die keeps stable , once ring die bottom layer was broken ,
turn over it and make the top layer to bottom, then it will work secondly time .
So one ring die can use two times .also the top and bottom layer hole dimension can be different, so one ring die can press into two different diameter pellets .
but other supplier pellet machine just have one layer and only can press one dimension pellets.
7.wood pellet machine
works with air fan and bags dust filter, on one hand, it will clean dust, very environmental protection . on the other hand, it can cool pellet machine inner spare parts heat temperature ,
making sure long continuous working hours.
8.wood pellet machine
all spare parts are made by CNC systems , through high technical heat treatment . we sold out more than 5000 sets XGJ pellet machine per year, have big discount for old customer, greatly welcome to ask me for details.
Technical parameter of XGJ series efficient centrifugal wood pellet machine
Model Power
(kw) Voltage Pellet Size
(mm) Pellets temperature
(degree) Raw material moisture Output
(t/h)
XGJ560 90 380 4-10 70-80 15%-20% 1-1.5
XGJ720 160 380 4-10 70-80 15%-20% 1.5-2
XGJ850 220 380 4-12 70-80 15%-20% 2-3
XGJ920 315 380 4-12 70-80 15%-20% 3-4
XGJ1050 365-450 380 4-30 70-80 15%-20% 5-6
XGJ1250 550-660 380 4-30 70-80 15%-20% 8-12
By Cindy 2016-3-16 11:41
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
By Mario 2016-12-12 13:03