Discountable price 10/8F-G Sand Pump Supply to America
Product Features Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps. Construction Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. ...
Discountable price 10/8F-G Sand Pump Supply to America Detail:
Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni_hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
1.Support 8. Discharge Joint Ring
2.Bearing Housing Assembly 9. Discharge Flang
3.Adapter Plate Clamp Band 10. Door Clamp Band
4.Volute Liner Seal 11. Cover Plate
5.Frame Plate Liner Insert 12. Intake joint ring
6. Impeller 13. Intake flange
7. Frame Plate / Bowl 14. Adapter plate
|Clear Water Performance|
|Capacity Q|| Head
|Impeller. Dia. (mm)|
The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.
Product detail pictures:
With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and advancement, we will build a prosperous future with each other with your esteemed firm for Discountable price 10/8F-G Sand Pump Supply to America, The product will supply to all over the world, such as: Chad , US , Boston , As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification. The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
Please visit http://www.drillingtechnology.org for more information
THIS IS A SMALL-SCALE PROTOTYPE OF A PROPOSED BALANCED HYDRAULICS REVERSE-CIRCULATOR. IT IS PART OF AN ONGOING R & D EFFORT TO DRIVE DOWN DRILLING COSTS AND REDUCE FORMATION DAMAGE. THE APPROACH HERE IS TO GET THE PUMP PRESSURE OFF THE FORMATION, TO KEEP DRILLING-FLUID SOLIDS AND REWORKED FORMATION SOLIDS OUT OF THE FORMATION, AND TO ENCOURAGE THE DRILLING FLUID TO GO BACK TO THE SURFACE FROM WHERE IT CAME……….MAKING IT POSSIBLE TO DRILL AHEAD WITHOUT EXCESSIVE OVERBALANCE FROM A SURFACE PUMP AND FORMATION-BREAKDOWN.
THIS SIMPLE INEXPENSIVE ELECTRO-HYDRAULIC INNOVATION IS INTENDED TO PROVIDE FOOD FOR THOUGHT REGARDING THE POSSIBILITY OF REVERSE-CIRCULATING DRILL-CUTTINGS TO THE SURFACE, INCLUDING FINE SAND AND ROCK CHIPS. THE TEST APPARATUS INDICATES IT MAY BE POSSIBLE TO DO SO WITH A LOW-VISCOSITY NEWTONIAN-REFRIGERANT DRILLING FLUID SUCH AS SOLUTION-WEIGHTED BRINE.
THE 2-INCH-DIAMETER PROTOTYPE, WHICH HAS ONE MOVING PART, PLUS TWO AUTOMATIC CHECK VALVES, IS ENERGIZED BY MEANS OF A 12-VOLT BATTERY CHARGER, SET AT TWO AMPS. BUT THE PROTOTYPE MIGHT BE SCALED-UP TO A DOWNHOLE PUMP FIVE INCHES OR SO IN DIAMETER FOR HYDROCARBON AND GEOTHERMAL DRILLING OPERATIONS. THIS MIGHT BE ACCOMPLISHED WITH MODERATE LEVELS OF ELECTRIC POWER INPUT, OPERATING FOR THE MOST PART, WITHIN THE TOP-HOLE ARTIFICIAL PERMAFROST RIND CREATED BY THE REFRIGERANT HYDRAULICS.
AT SUCTION-SPALLATION DRILLING DEPTHS, THE REVERSE-CIRCULATORS MIGHT BE INCREASED IN LENGTH TO 20 FEET OR SO IN AN EFFORT TO SEND STRONG UNDERBALANCED PULSE WAVES DOWN THROUGH THE DRILLSTRING T0 THE BOTTOM OF THE HOLE IN AN EFFORT TO FAIL THE ROCK IN TENSION AND EXCAVATE THE BEDROCK WITH MINIMAL ENERGY INPUT.
By Carlos 2016-6-08 15:58
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Arthur 2015-10-28 15:33