Discount wholesale AH Metal Lined Slurry Pump for Roman Manufacturers
Short Description:
Introduction Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc. AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pu...
Product Detail
Product Tags
Related Video
Feedback (2)
Discount wholesale AH Metal Lined Slurry Pump for Roman Manufacturers Detail:
Introduction
Type AH, HH, M pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc.
AH(R), HH are also called heavy duty slurry pumps, are used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, the pumps of this type also can be installed in multistage series. HH type pump is mainly used for transport low density high head or high density low abrasive high head slurry.
M(R) is a kind of middle duty slurry pump, is used to transport the fine particle size and middle density slurry.
The liner and impeller of AH(R) and M(R) model can be changeable and material can be either anti-abrasive metal or rubber, but material of liner and impeller of HH model only can be metal version. Rubber material wet parts are mainly used for transport the slurry which contains fine, non-sharp particle size.
The shaft seals for type AH(R), M(R) and HH pumps can be adoptable of gland seal, expeller seal and mechanical seal. The discharge can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Advantages
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Selection Chart and Performance
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) | Max.Eff. (%) |
NPSH (m) | Impeller. Dia. (mm) | |||
m3/h | l/s | |||||||
1.5 / 1 B -AH | 15 | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 152 |
2 / 1.5 B -AH | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 |
3 / 2 C – AH | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 |
4 / 3 C – AH | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
4 / 3 D – AH | 60 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
6 / 4 D – AH | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
6 / 4 E – AH | 120 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
8 / 6 E – AH | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
8 / 6 R – AH | 300 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
10 / 8 ST -AH | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 |
12 / 10 ST – AH | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 |
14 / 12 ST – AH | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 |
16 / 14 TU – AH | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 |
20 / 18 TU – AH | 1200 | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5-10 | 1370 |
1.5 /1 B -AH(R) | 15 | 10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | 2-4 | 152 |
2 / 1.5 B – AH(R) | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 178 |
3 / 2 C – AH(R) | 30 | 36-75.6 | 10-21 | 13-39 | 1300-2100 | 55 | 2-4 | 213 |
4 / 3 C – AH(R) | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
4 / 3 D – AH(R) | 60 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
6 / 4 D – AH(R) | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
6 / 4 E – AH(R) | 120 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
8 / 6 E – AH(R) | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
8 / 6 R – AH(R) | 300 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
10 / 8 ST – AH(R) | 560 | 540-1188 | 150-330 | 12-50 | 400-750 | 75 | 4-12 | 686 |
12 / 10 ST -AH(R) | 560 | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 762 |
14 / 12 ST – AH(R) | 560 | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3-8 | 965 |
16 / 14 TU – AH(R) | 1200 | 1224-2754 | 340-765 | 9-43 | 250-450 | 82 | 3-8 | 1067 |
20 / 18 TU – AH(R) | 1200 | 2268-4860 | 630-1350 | 11-46 | 200-350 | 82 | 2-8 | 1372 |
10 / 8 E – M | 120 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
10 / 8 R – M | 300 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
1.5 / 1 C -HH | 30 | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 330 |
3 / 2 D -HH | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 |
4 / 3 E -HH | 120 | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 508 |
6 / 4 F – HH | 260 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 711 |
8 / 6 S – HH | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 |
Remark: 1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed |
Construction
The AH type slurry pumps have pump bodies that consist of replaceable wear-resistant metal liners or wear-resistant rubber liners, and impellers can also apply wear-resistant metal material or wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and impellers.
Application
AH series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for Discount wholesale AH Metal Lined Slurry Pump for Roman Manufacturers, The product will supply to all over the world, such as: Belgium, Hanover, Tuvalu, We accomplish this by exporting our wigs directly from our own factory to you. The goal of our company is to get customers who enjoy coming back to their business. We sincerely hope to cooperate with you in the near future. If there's any opportunity, welcome to visit our factory!!!
MARINE SEA SERVICE
(A Complete Marine Service Company)
SERVICE PORT: Chittagong, Mongla, Kutubdia, outer Anchor & OPL
=====================================================================
Dear Sir/Madam.
With Due To Respect That MARINE SEA SERVICE Ship Supply/Service & Repair/Ship Scrap Material Buyer Company In Chittagong And Mongla Port, Bangladesh.
SUPPLY (ALL KINDS OF MARINE SUPPLY):
1. Deck store, Engine store, Cabin store
2. BUNKER & LUBE OIL: (MGO, IFO, MDO) (Castrol, Shell, Mobil, Mani Engine, Hydraulic And Slender Oil)
3. FRESH PROVISIONS: Fresh fruit , Vegetable , Meat , Bonded store
4. BRIDGE ITEM: Gyro Compass, Auto Pilot, Voice Data Recorder And Communication Item.
5. SAFETY ITEMS: Life Boat/ Life Raft (All Class) Annual Servicing With Certificate. (Lsa & Fsa)
6. WIRE ROPE: Diameter 2mm-90mm, Thimble, Clip, Socket.
7. MOORING ROPE: Polypropylene, Pp Rope, Etc
8. ANCHOR, ANCHOR CHAIN: Shackle, Swivel.
9. PUMPS: Oil Pump, Bilge Pump, Crane Pump, Sewage Pump, Boiler Feed Pump, Sea Water Pump, Hydraulic Pumps: Gear Pump, Vane Pump, Piston Pump Etc.
10. LASHING MATERIALS: Turnbuckle, Midblock, Twist Lock, Turnbuckle, Etc.
11. DECK HARDWARE: Store Such As IMPA And ISA
12. DECK MACHINERY: Winch, Grab, Crane, Etc
13. LADDERS: Gangway Ladder, Extension Ladder, Accommodation Ladder, Etc
MARINE SPARE PARTS, SUPPLY, INSTALLING AND EXPORTS:
1. MAIN ENGINE SPARE PARTS:
MAN B&W: 6L60MC, 6L60MCE, 6L50MC, 6L35MC, 6L70MC, 6L80MC
SOLZER: RTA84, RTA 76, RTA58, RTA62, RTA45
Such As Cyl. Liner, Cyl. Cover, Piston Crown, Piston Ring, Nozzle Etc.
2. AUXILIARY ENGINE:
DAIHATSU: DL- 20, 22, 24, 80, PS- 20, 26, 80,
YANMAR: 6N 280, 6N260, 6N21,T220, T240, T260, S165, S185
SULZER: 25/30ATL, 25/30, 25/30D. Original & OEM parts.
3. DIESEL ENGINE:
Zhenjiang Diesel (ZJMD), Shangxi Diesel(SXD), Henan Diesel(HD), etc. We can offer original & OEM (same quality as original ones) competitively: South Korea, German, Japanizes Maker are available.
SERVICE:
1. Chipping & Painting Works / Shore Crane Service
2. Garbage/ Tank/ Hatch/ Ship Hull And Bottom Etc Cleaning With Certificate
3. Discharging Slops And Sludge Oil / Cargo Inspection.
4. Oxygen, Acetylenes, Freon, L.P.G Gas Refilling/ Servicing/Testing.
5. Firefighting Equipment-Inspection/Testing/Survey/Servicing/Refilling
SHIP REPAIR OFFER AS FOLLOW:
1. Hatch Covers Repair/Inspections (Incl. Ultrasonic Testing By Certified Operators).
2. Ship Main and Auxiliary Engine Over-Hauling and Repair
3. Pumps/Compressor/All Pipes Lines/Steel/Over-Hauling and Repair.
4. Repairing Of Navigational Apparatus /Radar/Vhf /Radio Transmitter /Echo Sounding
5. Under Water Hull/Ship Bottom/ Propeller Cleaning & Repairing
6. Life Raft/Co2 System/Safety & Fire Fighting Equipment Servicing
7. Cranes/Grabs/Hydraulics/Boilers/Heat Exchangers Repair/Servicing
8. Electrical/Automation/Cable Line Install/Repair/Servicing
Your Prompt Reply Will be highly Appreciated.
B. Regards-
MR. KING
General Manager
MARINE SEA SERVICE
HEAD OFFICE: SHARIPARA, PS+PO: PAHARTOLI, (FLORE NO: 02, ROOM NO: 09)-CHITTAGONG.
BRANCH OFFICE: MAIN ROAD, FLORE NO-11, PS+PO- MONGLA,BAGERHAT.
——————————————————————————————————
CONTACT EMAIL:
[email protected]
[email protected]
H/P: +88 01733 472 916
CHATTING:
SKYPE: marineseaservice
QQ: 3057628161
http: www.marineseaservice.com
———————————————————————————————————
With Asetek liquid cooling, you may experience pump noise when installing your cooler for the first time or after relocating your system. The noise is typically caused by air bubbles moving through the pump. It generally goes away on its own within 15 minute of starting up, but here are a few ways you can minimize air bubbles in your system.
When installing your liquid cooling, ensure that at least a portion of the hex is higher than the pump. Also, install it with the tubes entering at the bottom of the hex when installing at the rear or side panel of a case. In some cases, it may help to uninstall your hex and shake it to help move the air bubbles along.
Here’s an example of a noisy pump. If we shake it, the air bubbles go away.
These steps should ensure your liquid cooling performs as quietly as possible.
By Emma 2016-3-28 12:27
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Christine 2016-9-29 19:19