Discount Price 8/6E-G Sand Pump Export to Thailand
Product Features Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps. Construction Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. ...
Discount Price 8/6E-G Sand Pump Export to Thailand Detail:
Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni_hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
1.Support 8. Discharge Joint Ring
2.Bearing Housing Assembly 9. Discharge Flang
3.Adapter Plate Clamp Band 10. Door Clamp Band
4.Volute Liner Seal 11. Cover Plate
5.Frame Plate Liner Insert 12. Intake joint ring
6. Impeller 13. Intake flange
7. Frame Plate / Bowl 14. Adapter plate
|Clear Water Performance|
|Capacity Q|| Head
|Impeller. Dia. (mm)|
The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.
Product detail pictures:
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Discount Price 8/6E-G Sand Pump Export to Thailand, The product will supply to all over the world, such as: Tanzania , azerbaijan , Southampton , At present our sales network is growing continually, improving service quality to meet customer's demand. If you are interested in any products , please contact us at anytime. We are looking forward to forming successful business relationships with you in near future.
Quality Korean Hook & Claw vacuum pumps for the Dairy Farm industry in New Zealand
Korean manufactured Wonchang pumps are dry running (use no oil or water), compact and direct driven by high efficiency electric motors. The air suction volume is controlled via a variable speed driven motor which determines the volumetric flow delivered to the milking machine.
All vacuum pumps in this industry are rated in free air at -50kPa vacuum level. Working vacuum levels are typically between -44 kPa through to -50kPa.
Claw pumps are energy efficient and in conjunction with the variable speed drives significant cost savings can be made.
As an example, a Liquid ring vacuum pump installed with no variable speed drive has an adsorbed motor power of 15kW and a delivered flow rate of around 4000 l/min. A system with 4000 l/min flow requirement has a built in reserve capacity and is regulated by an adjustable vacuum regulation valve (bleeds in air from atmosphere) to maintain a constant vacuum level.
If you replaced the above pump with a dry running VCX 500 Hook & Claw vacuum pump without a variable speed drive, it would require 11kW motor power and deliver a flow rate of 4300 l/min. When you add the variable speed drive, you will achieve further motor power saving with the average adsorbed power diving as low as 9kW. Thats a huge saving of 6kWs per hour multiplied by your kWh unit price for every operational hour of your plant! As an illustration, with a 6kW motor power saving and a unit cost of $0.20 per kWh x 6hrs per day x 200 days per year, you achieve a saving of $1,440 per year!
Hook & Claw pumps have pumping speeds from 1000 to 5000 l/min at -50kPa. These pumps can be used in harsh environments where water vapour content is high, due to a rugged simple design, an internal coating and high running temperature which ensures that vapour doesnt condense inside the pump.
These pumps do require protection from the ingestion of liquid (slugs) from wash down and process carryover. mbar Ltd can provide a proven process solution to eliminate this risk, ensuring maximum service life for your vacuum pump even in even the harshest environment.
look no hands, once I got hydraulic drive to vacuum pump no need to get off tractor……..
By Linda 2015-12-30 16:23
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Danny 2016-9-14 19:18