Chinese wholesale TL(R)Series FGD Pump Export to South Africa

Chinese wholesale
 TL(R)Series FGD Pump  Export to South Africa

Short Description:

Introduction Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD. Samples 600X-TLR: The diameter of discharge: 600mm. bearing lubr...


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking towards the principle of "Super High-quality, Satisfactory service" ,We've been striving to become a superb business partner of you for , , , Quality is factory's life , Focus on customers' demand is the source of company survival and development, We adhere to honesty and good faith working attitude, looking forward to your coming !
Chinese wholesale TL(R)Series FGD Pump Export to South Africa Detail:

Introduction

Series of TL FGD pump is a single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide range capacity, high efficiency, better energy saving. This series of pump is matched by tight structure X support which can save much space. Meanwhile our company develops many kinds of materials targeted on the pump for FGD.

Samples

600X-TLR: The diameter of discharge: 600mm. bearing lubricating type: thin oil, rubber liner.

700X-TL: The diameter of discharge:700mm, bearing lubricating type: thin oil, metal liner.

Features

  1. CFD flowing simulating analysis technology is adopted on wetted parts of pump, it has a reliable property and high operational efficiency.
  2. To adjust bearing assembly can change impeller position in volute, it can keep pump unit in a state of high efficient operation.
  3. The pump is back pull-out construction, it has easy construction and simplifies maintenance. It can be disassembled without dismantling suction & discharge pipes.
  4. Double rows taper roller bearings are fitted on pump end, roller bearings are fitted on drive end. Bearings are lubricated by oil which can modify bearing working condition and increase wear life of bearings.
  5. Mechanical seal adopted is special for cartridge mechanical seal of FGD process.

Technical Parameters

 Pump   Model    

       Capacity          Q  (m3/h)

       Head          H (m)

    Speed          n (r/min)

    Max.Eff.    (%)

        NPSH         (m)

    Outlet Dia./  Inlet Dia.     (mm)

 
 
1000X- TL(R)

10440

15

485

89

7.0

1000/1200

 
900X-TL(R)

15000

30

485

90

8.5

900/1000

 
800X-TL(R)

9360

31

485

90

7.0

800/900

 
700X-TL(R)

6840

26

485

87

6.0

700/800

 
600X-TL(R)

6300

25.5

620

88

5.5

600/700

 
500X-TL(R)

3750

25

725

85

5.0

500/500

 
400X-TL(R)

2500

25

725

83

5.0

400/450

 
350X-TL(R)

1600

25

960

82

4.5

350/400

 
300X-TL(R)

720-1800

15-40

450-800

60-79

2-5.5

300/350

 
250X-TL

540-1800

20-75

450-900

75-86

2-4

250/300

 
200R-TL(R)

360-1000

10-40

450-980

80-85

2-5.5

200/250

 
150R-TL(R)

200-800

15-60

600-1200

65-80

2-5.5

150/200

 
150E-TL(R)

150-540

12-40

800-1480

50-67

2.5-6

150/200

 
100E-TL(R)

70-360

15-55

800-1600

50-68

2-6.5

100/150

 
100D-TL(R)

20-220

10-40

800-1800

50-65

2-4.5

100/150

 
75D-TL(R)

40-160

10-50

1000-2200

50-72

2-6

75-100

 
75CC-TL(R)

30-130

8-45

900-2400

40-57

2-6.5

75/100

 
50D-TL

70-140

25-85

850-1450

30-47

2-6.5

50/75

 
50CC-TL(R)

40-85

12-64

1300-2700

40-58

2-10

50/75

 
50BB-TL(R)

16-75

9-44

1400-2800

35-62

2-5.5

50/75

 
40BB-TL(R)

32-72

6-58

1200-3200

30-45

2-8

40/50

 
20CC-TL

16-34

25-92

1400-2200

16-20

2-4.5

20/40

 
20BB-TL(R)

12.5-28

6-68

1200-3800

20-40

2-4.5

20/40

 
20A-TL(R)

2.5-10

6-37

1400-3000

15-30

 

20/40

 

 

Constuction

TL web

 

Sheet One

  NO.  Name    Material NO.    Name  Material
1 Support  Cast Iron 7 Suction Cover  duplex phase stainless white iron
2      Impeller Release Collar Stainless Steel 8 Impeller   duplex phase stainless white iron
3 Shaft Sleeve ZG0Cr18Ni12Mo2Ti 9 Cover Plate QT500-7 Ductile iron
4      Mechanical Seal  Hard Alloy 10 Frame Plate Liner Natural Rubber+A3
5 Frame plate Liner Insert  Natural Rubber+A3 11 Frame Plate QT500-7 Ductile iron
6 Cover Plate Liner  Natural Rubber+A3 12 Adaptor Plate QT500-7 Ductile iron

Sheet Two

 NO.      Name   Material  NO.   Name    Material
1 Support  Cast Iron 7 Throatbushing     duplex phase stainless white iron
2      Impeller Release Collar  Stainless Steel 8 Impeller  duplex phase stainless white iron
3 Shaft Sleeve ZG0Cr18Ni12Mo2Ti 9 Suction Cover    QT500-7+Rubber
4  Mechanical Seal  Hard Alloy 10     Cover Plate QT500-7 Ductile Iron
5 Frame plate Liner insert duplex phase stainless white iron 11 Frame Plate QT500-7 Ductile Iron
6 Volute liner duplex phase stainless white iron 12 Adaptor Plate QT500-7 Ductile Iron

Material Adopted

Our company developed a kind of new material duplex phase stainless white iron (A49)on FGD device specially. The material has anti-corrosive property of duplex stainless steel and anti-abrasive property of high chrome white iron so that it has remarkable anti-abrasive and anti-corrosive property in FGD process.

Pump casing, pump cover and adaptor plate are bearing pressure parts which are made of ductile iron.

Rubber lined pump: impeller, suction cover/front liner insert are made of duplex phase stainless white iron. Front liner, back liner, back liner insert material is natural rubber which has good anti-corrosive property with light weight, low cost.

Metal lined pump: impeller, volute liner, throatbushing ,frame plate liner insert are made of duplex stainless white iron. Suction cover is made of ductile iron with rubber stuck.

 

TL 3D

 

Advantages

  • The distinct characteristic of our FGD engineering pump is double-casing and rubber lined technology. Double-casing structure refers that the pump body is divided into outer pump shell and inner lining. The former bears pressure and insulates slurry. The latter contact abrasive and corrosive slurry. we only need to replace the worn out inner liner.
  • FGD engineering pump is mainly used to transport limestone and gypsum slurry. This requires the wet part performance well not only in anti-abrasive but also in anti-corrosive. Therefore, the wet parts (such as: impeller, volute liner and frame plate insert, etc.) adopt A49 combined with rubber material. The engineering practice shows that the  service life of components made by ours is triple or even higher than the traditional Cr30A products or duplex stainless steel pump.
  • A49 material is a kind of abrasive-resistant and corrosive-resistant alloy widely used for FGD projects in the world , the main composition include chromium 28-30%,  molybdenum 2-3%, nickel%, carbon 1%, copper is less than or equal to 2%. Corrosive-resistance characteristic: this is given by the austenitic element. In the 70 degree sulfuric acid solution which contains chloride 100000ppm and pH value of 4, the corrosion rate of is 0.5mm/a. In the 60 degree solution which contains 5% nitric, the corrosion rate is 0.5mm/a. In the sodium hydroxide solution at 80 degree and pH value of 13, the corrosion rate is 0.5mm/a. Wear-resistance characteristic: The abrasion performance is given by the chromium carbide on the grain boundary and secondary carbon compounds precipitated on austenite bodies. The abrasion performance is equal to A05, GLH-5, Ni-1.
  • TL (R) series FGD engineering pump has the characteristics of uniform parts specifications, widely used in the market, fast delivery, long service time, convenient installation, low cost and so on.

Product detail pictures:

Chinese wholesale
 TL(R)Series FGD Pump  Export to South Africa detail pictures


Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, have confidence in the very first and management the advanced" for Chinese wholesale TL(R)Series FGD Pump Export to South Africa, The product will supply to all over the world, such as: Ukraine , Mali , United States , Our qualified engineering team will usually be prepared to serve you for consultation and feedback. We've been able to also deliver you with absolutely free samples to meet your needs. Best efforts might be made to offer you the ideal service and items. For anyone who is interested in our company and products, be sure to make contact with us by sending us emails or contact us right away. In order to know our solutions and organization. ar more, you can come to our factory to determine it. We are about to usually welcome guests from around the globe to our corporation. o create small business relations with us. Please genuinely feel no cost to speak to us for enterprise. nd we believe we have been gonna share the most effective trading practical experience with all our merchants.


  • Experiment 1: Centrifugal Pump Performance Curve
    Performed by: Group 4 (5ME-A)
    Submitted to: Engr. Jeffrey Mercado



    More Details: http://www.pakistancrushers.com/contact.php
    Iron ore mining process and iron ore mining equipments- SCM
    Iron ore mining process Crushing equipment: 1.Primary crusher锛?0mm锛夛細Jaw crusher 2.Secondary crusher锛?0mm锛夛細Cone crusher Grinding equipment:
    3/2C-AH (50ZJ) AH Slurry Pump For Iron Ore Dressing Plant
    (50ZJ) AH Slurry Pump For Iron Ore Dressing Plant of shijiazhuang Naipu pump Co.,ltd from China. Sign In
    Join Free mining ,coal, power,
    Magnetite Separation Production Line – Xinhai Mining
    Xinhai Magnetite Separation Production Line reduces the production line cost by Iron Ore Mining This is 3D demo Video of the dressing plant created
    gold ore dressing pdf – Gold Ore Crusher
    Sector G Metal Mining Facilities (Ore Mining and Dressing subsectors: iron ore; copper ores; lead and zinc ores, gold and silver ores;
    iron ore dressing process pdf – Coal Surface Mining
    iron ore dressing process pdf Description : ore dressing operation Therefore, the question asked is how an underground iron ore mining company like
    ore dressing for iron is done by
    3 stages of ore dressing–Henan Mining Heavy Machinery Co., Ltd. During the 18th century, most of the ore dressing (or processing) was done by hand. beneficiation
    Iron ore dressing equipments for iron ore concentrate
    Iron ore dressing plant usually involves a combination of crushing and milling as well as magnetic separation. This is achieved by passing the finely crushed ore over
    ORE MINING AND DRESSING POINT SOURCE CATEGORY
    Pt. 440 PART 440鈥擮RE MINING AND DRESSING POINT SOURCE CATEGORY Subpart A鈥擨ron Ore Subegory Sec. 440.10 Applicability; mines operated to obtain iron ore
    Iron ore dressing technology and dressing plants – Mining
    Iron ore dressing plants. Iron ore dressing technology: Magnetite beneficiation, weak-magnetite beneficiation, polymetallic ore dressing technology and dressing plants.
    51722 RULES AND REGULATIONS – EPA
    RULES AND REGULATIONS Iron or subegory the ore mining and dressing point source egory pursuant to sections 301, 304 (b)
    PART 440鈥擮RE MINING AND Subpart D鈥擬ercury Ore Subegory
    1 PART 440鈥擮RE MINING AND DRESSING POINT SOURCE CAT-EGORY Subpart A鈥擨ron Ore Subegory Sec. 440.10 Applicability; description of the iron ore sub-
    Korshunov Mining Plant – Mechel
    Zheleznogorsk-Iliymsky, Irkutsk Region, Russian Federation. Korshunov Mining Plant OAO is an industrial complex producing and dressing iron ore.
    MINING EQUIPMENT FOR SPECULARITE IRON ORE UPGRADING-IRON
    MINING EQUIPMENT FOR SPECULARITE IRON ORE UPGRADING-IRON ORE DRESSING PLANT . Similar to hematite and limonite iron ore, specularite is also kind of weak mineral and
    Iron ore dressing plant – ironoredressingplant.com/
    To celebrate the Ghana Independence Day and Triennials of SMMI (Shanghai Shibang Machinery Co.,Ltd) Ghana Branch office, SMMI is to offer a Special Surprise for Ghana
    mining iron ore dressing sale crasher – crusherasia.com
    Iron ore processing, iron ore mining, iron ore grinding plant Iron ore processing, iron ore mining, iron ore grinding plant, iron ore crusher. 10mm wet vibratory
    iron in mining – whost.biz
    Iron Ore mining in the Plibara region of Western Australia near Newman. The Mt. Whaleback, Yandi, chrome ore mining process; cu pb zn dressing process;
    Ore Mining and Dressing Effluent Guidelines
    Effluent
    EPA promulgated the Ore Mining and Dressing Effluent Guidelines and The Ore Mining Effluent Guidelines and Standards are incorporated Iron Ore. Aluminum
    Iron Mining – Pisces Exim
    Iron ore Mining Iron ore are rocks and minerals. before designing the dressing solution. Iron ore crushing and screening
    iron ore minerals – whost.biz
    Iron ore is a mineral substance which, when heated in the presence of a reductant, will yield metallic iron chrome ore mining process; cu pb zn dressing process;
    ore dressing plant,iron ore beneficiation flowsheet- Henan
    Ore Dressing Beneficiation Iron Ore Processing Plant Rutile Mineral P Copper Ore Benefiion equipment mining e
    Top 18 Ore Dressing Engineer profiles
    LinkedIn
    Here are the top 18 Ore Dressing Engineer year experience in the field of Iron Ore Processing and Ore Dressing Engineer. industry Mining

    Jaw Crusher: https://www.youtube.com/watch?v=j8OIR8ohTzY

    The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.

    5 Stars By Zoe 2016-9-27 16:17
    We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!





















    5 Stars By Sara 2016-2-24 14:25