Cheap PriceList for 6/4D-G Gravel Pump to Puerto Rico Factory
Short Description:
Product Features Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps. Construction Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. ...
Product Detail
Product Tags
Related Video
Feedback (2)
Cheap PriceList for 6/4D-G Gravel Pump to Puerto Rico Factory Detail:
Product Features
Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.
Construction
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni_hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
1.Support 8. Discharge Joint Ring
2.Bearing Housing Assembly 9. Discharge Flang
3.Adapter Plate Clamp Band 10. Door Clamp Band
4.Volute Liner Seal 11. Cover Plate
5.Frame Plate Liner Insert 12. Intake joint ring
6. Impeller 13. Intake flange
7. Frame Plate / Bowl 14. Adapter plate
Performance Chart
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) |
Max.Eff. (%) |
NPSH (m) |
Impeller. Dia. (mm) | |||
m3/h | l/s | |||||||
6/4D-G | 60 | 36-250 | 10-70 | 5-52 | 600-1400 | 58 | 2.5-3.5 | 378 |
8/6E-G | 120 | 126-576 | 35-160 | 6-45 | 800-1400 | 60 | 3-4.5 | 378 |
10/8S-GH | 560 | 216-936 | 60-260 | 8-52 | 500-1000 | 65 | 3-7.5 | 533 |
10/8S-G | 560 | 180-1440 | 50-400 | 24-30 | 500-950 | 72 | 2.5-5 | 711 |
12/10G-G | 600 | 360-1440 | 100-400 | 10-60 | 400-850 | 65 | 1.5-4.5 | 667 |
12/10G-GH | 1200 | 288-2808 | 80-780 | 16-80 | 350-700 | 73 | 2.0-10.0 | 950 |
14/12G-G | 1200 | 576-3024 | 160-840 | 8-70 | 300-700 | 68 | 2.0-8.0 | 864 |
16/14G-G | 600 | 720-3600 | 200-1000 | 18-44 | 300-500 | 70 | 3.0-9.0 | 1016 |
16/14TU-G | 1200 | 324-3600 | 90-1000 | 26-70 | 300-500 | 72 | 3.0-6.0 | 1270 |
18/16TU-G | 1200 | 720-4320 | 200-1200 | 12-48 | 250-500 | 72 | 3.0-6.0 | 1067 |
Applications
The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.
Product detail pictures:
We continuously execute our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management advertising and marketing gain, Credit history attracting buyers for Cheap PriceList for 6/4D-G Gravel Pump to Puerto Rico Factory, The product will supply to all over the world, such as: Peru, London, Netherlands, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Servo Motor│How do servo motors work│
Hi everybody , this video I will share about servo motor.
More videos:-
A servomotor is a rotary actuator or linear actuator that allows for precise control of angular or linear position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for position feedback. It also requires a relatively sophisticated controller, often a dedicated module designed specifically for use with servomotors.
Servomotors are controlled by sending an electrical pulse of variable width, or pulse width modulation (PWM), through the control wire. There is a minimum pulse, a maximum pulse, and a repetition rate. A servo motor cans usually only turn 90 degrees in either direction for a total of 180 degree movement.
Servomotors are not a specific class of motor although the term servomotor is often used to refer to a motor suitable for use in a closed-loop control system.
Servomotors are used in applications such as robotics, CNC machinery or automated manufacturing.
How Do Servo Motors Work.
A servomotor is closed-loop servomechanism that uses position feedback to control its motion and final position. The input to its control is some signal, either analogue or digital, representing the position commanded for the output shaft.
The motor is paired with some type of encoder to provide position and speed feedback. In the simplest case, only the position is measured. The measured position of the output is compared to the command position, the external input to the controller. If the output position differs from that required, an error signal is generated which then causes the motor to rotate in either direction, as needed to bring the output shaft to the appropriate position. As the positions approach, the error signal reduces to zero and the motor stops.
Thanks for watching my learning video. Don’t forget like, share, and comment this video.
Servo Motor│How do servo motors work│
More videos please subscribe My channel Learning Engineering.
content source by https://en.wikipedia.org/wiki/Servomotor
In this HVAC Furnace Troubleshooting Video I go over how to definitely tell if your Pressure Switch is good or bad. The pressure switch is one of the most misdiagnosed components in furnaces. I use a modulating gas furnace with several pressure switches as the example. I use a SDMN6 with an internal pump in order to diagnose the pressure switch while comparing the pump pressure to the rated pressure on the pressure switch.
Supervision is needed by a licensed HVAC Tech while doing this as Experience and Apprenticeship garners Wisdom and Safety.
These Videos are all part of our Training Series on HVACR Service, Installation, Preventative Maintenance, General Knowledge, and Tips. Please comment and ask for videos that you would like to see in the future! We come out with new videos every few days from my job sites, service calls, and the training shop! I hope you enjoy and find them very beneficial! See you next time at ACSERVICETECH Channel!
Check out this Playlist Next!
Air Conditioning and Heat Pump Refrigerant Charging—–
https://www.youtube.com/playlistlist=PLxnHR5_D2ojzAUXWWQt9A8juotNkzwYlk
Please add any Questions or Comments in the Box Below and I will Get Back with You!
ACSERVICETECH is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
You can enter Amazon through this Affiliate Link found here or in the ” Discussion” Channel Page Comments https://amzn.to/2aenwTq
Prices are the same as usual. (Link has to be clicked on from an ACSERVICETECH YouTube source and not cut and pasted)
The above link happens to be the Gauge Set that I use in my refrigerant videos but you can search from there.
Fieldpiece SDMN6 Dual Pressure Testing Manometer with Pump-https://amzn.to/2jyK5Ka
Here is a link to Refrigerant hoses with valves used in the videos https://amzn.to/2aBumVI
Here is the Link for the Yellow Jacket Refrigerant Manifold Gauge Set used in the videos https://amzn.to/2aenwTq
Here is a link to the Hilmor 4 port Aluminum Manifold Gauge Set-
https://amzn.to/2m4QLik
Here is a link to the Appion core removal and vacuum tool- https://amzn.to/2t5ogIb
Here is the link to the Fieldpiece SDMN6 Dual Pressure Testing Manometer with Pump-https://amzn.to/2jyK5Ka
Here is a link to the UEI DL389 Multimeter used in the video https://amzn.to/2av8s3q
Here is a link for RectorSeal Bubble Gas Leak Detector https://amzn.to/2ckWACn
Here is a link to the Air Acetylene Torch setup- https://amzn.to/2aQalsb
Here is a link the Nitrogen Regulator https://amzn.to/2bXdR5f
Here is a link to the Nitrogen Flow Meter https://amzn.to/2brvoBg
Here is a link for the Supco Magnet Jumpers https://amzn.to/2gS4h6z
Here is a link to the Digital Refrigerant Scale used in the video
https://amzn.to/2b9oXYl
Here is a link to the thermostat 3/32 screwdriver — https://amzn.to/2hxt7uK
Here is a link to the JB 6 CFM Vacuum Pump https://amzn.to/2nqbvo8
Here is a link to the JB Platinum 5 CFM Vacuum Pump with Valve
https://amzn.to/2mGKcSh
Here is a link to the Supco Vacuum Micron Gauge https://amzn.to/2bH98bO
Here is a link to the 1/4″ by 1/4″ female coupler from Supco – https://amzn.to/2kFrbU9
Here is a link the Nitrogen Regulator https://amzn.to/2bXdR5f
Here is a link to the Nitrogen Flow Meter https://amzn.to/2brvoBg
Here is a link to the General Tools digital Psychrometer
https://amzn.to/2cSHsi1
Here is a link to the Amprobe Digital Psychrometer https://amzn.to/2d7cGkW
Here is a link to the Fieldpiece SDP2 Digital Psychrometer- https://amzn.to/2nniMVR
Here is the UEI Digital Manometer used in the videos https://amzn.to/2c1XkiT
Here is the link for the Ratcheting Service Wrench https://amzn.to/2dGV4Nh
Here is a link to the Appion G5 Twin Recovery Pump https://amzn.to/2dGSEyr
Here is a link to the Malco Sheet metal scribe- https://amzn.to/2qCwu9D
Here is a link to the Wiss Right Tin Snips- https://amzn.to/2rGnBvX
Here is a link to the Wiss Bulldog snips- https://amzn.to/2rd1Dz5
Here is a link to the Malco 90 Degree Right Hand Vertical Snips- https://amzn.to/2qHHpu4
Here is a link to the Malco 90 Degree Left Hand Vertical Snips- https://amzn.to/2qHF564
Here is a link to the Wiss 12″ Folding Tool/Breaker Bar- https://amzn.to/2qD3Lxi
Here is a link to the Wiss 3 Pack Tin Snips- https://amzn.to/2bHWhWO
Here is a link to the Wiss 5 Blade Crimper- https://amzn.to/2bwTlsW
Here is a link to the Wiss Hand Seamers- https://amzn.to/2dRk83v
Here is the link for the Irwin Wire Stripper/Cutter/Crimper https://amzn.to/2dGTj2V
Here is the link to the Stanley 6 in 1 Screwdriver https://amzn.to/2q2SAhe
Thanks for your support! I believe this to be the very
best price I have found. Please let me know if anyone finds a lower price anywhere!
Thank You,
ACSERVICETECH
By Barbara 2016-10-17 12:04
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Louis 2016-11-11 13:14