2017 Latest Design L Metal Light Duty Slurry Pump to United States Factory
Short Description:
Introduction Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal. Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine partic...
Product Detail
Product Tags
Related Video
Feedback (2)
2017 Latest Design L Metal Light Duty Slurry Pump to United States Factory Detail:
Introduction
Type L(R) pumps are cantilevered, horizontal, centrifugal slurry pumps, which are also called light duty slurry pump. They are suitable for delivering low abrasive low density slurry for metallurgical, mining, coal and building material departments. The shaft seal can adopt gland seal, expeller seal or mechanical seal.
Type L(R) pumps operate in high speed with small volumes and light weight to save floor area. It is mainly used to transport the slurry which contains fine particle size and weight concentration not more than 30%. The liner and impeller of this pump can be changeable ,eight with anti-abrasive metal or rubber material.
Advantages
1. Discharge branch can be positioned at intervals of 45 degree.
2. Good replaceability of components with original pump.
3. Wear-resistant metal and long service life time.
4. With greater axial and radial load rating capacity,
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Suit different working condition.
7. Wide application, high efficiency and easy to maintain.
8. Wide options for impeller.
9. Bearing assembly use grease lubrication.
Type Notation
Technical Parameters
Pump Model | Allowable Max. Power (kw) |
Clear Water Performance | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) |
Max.Eff. (%) |
NPSH (m) |
Impeller. Dia. (mm) | |||
m3/h | l/s | |||||||
20A – L | 7.5 | 2.34-10.8 | 0.65-3 | 6-37 | 1400-3000 | 40 | 2.5-3 | 152.4 |
50B – L | 15 | 11.5-76 | 3.2-21.1 | 8.5-46 | 1400-2800 | 62 | 2.5-5.5 | 190 |
75C – L | 30 | 18-151 | 5-42 | 4-46.4 | 900-2400 | 57 | 3-6 | 229 |
100D – L | 60 | 46.8-324 | 13-90 | 7-48.3 | 800-1800 | 64 | 2-6 | 305 |
150E – L | 120 | 115-568.8 | 32-158 | 10.5-51.8 | 800-1500 | 60 | 2.5-6 | 381 |
200E – L | 120 | 234-910 | 65-235 | 9.5-40 | 600-1100 | 64 | 3-6 | 457 |
250E – L | 120 | 396-1425 | 110-396 | 8–30 | 500-800 | 77 | 2-10 | 550 |
300S – L | 560 | 468-2538 | 130-708 | 8-60 | 400-950 | 79 | 2-10 | 653 |
350S – L | 560 | 650-2800 | 180-780 | 10-59 | 400-840 | 81 | 3-10 | 736 |
400ST – L | 560 | 756-3312 | 210-920 | 7-37.5 | 300-600 | 85 | 2-8 | 825 |
450ST – L | 560 | 1080-4356 | 300-1210 | 9-40 | 300-550 | 87 | 3-10 | 933 |
550TU – L | 1200 | 1980-7920 | 560-2200 | 10-50 | 250-475 | 86 | 4-10 | 1213 |
650TU – L | 1200 | 2520-9108 | 700-2530 | 10-55 | 200-350 | 86 | 2-8 | 1425 |
50B – L(R) | 15 | 9-61 | 2.5-17 | 3-32.4 | 1200-2600 | 48 | 2.75-4.5 | 190 |
75C – L(R) | 30 | 28.8-154.8 | 8-43 | 9-43 | 1100-2300 | 60 | 3-5 | 229 |
100D – L(R) | 60 | 54-288 | 15-80 | 12-38 | 800-1600 | 65 | 2.5-5.5 | 305 |
150E – L(R) | 120 | 72-576 | 20-160 | 4-38 | 800-1300 | 65 | 2.5-5.5 | 381 |
250E – L(R) | 120 | 396-1425 | 110-396 | 8-30 | 500-800 | 77 | 2-10 | 550 |
300S – L(R) | 560 | 432-1900 | 120-528 | 7-41 | 400-800 | 81 | 3-8 | 653 |
350S – L(R) | 560 | 720-2844 | 200-790 | 10-41 | 400-700 | 86 | 3-7 | 736 |
400ST – L(R) | 560 | 720-3312 | 200-920 | 7-51 | 300-700 | 80 | 2-10 | 825 |
450ST – L(R) | 560 | 1008-4356 | 280-1210 | 9-48 | 300-600 | 80 | 2-9 | 933 |
550TU – L(R) | 1200 | 1980-7920 | 560-2200 | 10-50 | 250-475 | 86 | 4-10 | 1213 |
650TU – L(R) | 1200 | 2520-9108 | 700-2530 | 10-39 | 200-350 | 86 | 2-8 | 1425 |
Remark: 1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed |
Selection Chart
Application
L(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material…etc. various industrial sites. Our pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump, Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump…
Product detail pictures:
Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for 2017 Latest Design L Metal Light Duty Slurry Pump to United States Factory, The product will supply to all over the world, such as: Korea, Oman, Indonesia, Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we've insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.
Pumping solvent at capacity of 800 m3/hr @ 16.7 meter. Design pressure 150 BarG.
A self-propelled grab hopper dredger,
Cherry Sand has recently been modernised
with a Pulleman grab crane and equipped
with a range of buckets to enable dreging
in a wide variety of materials. The hopper
well is fitted with a grid to avoid debris
being deposited at sea, and discharges via
hydraulically operated bottom doors.
The dredging crane is fitted with precise
depth-indicating equipment and a
computer-controlled safe-working load
system to prevent accidental overload
conditions.
The vessel is fitted with all usual navigation
aids, VHF, MF and mobile telephone, e-mail
and fax links.
SPECIFICATIONS
Built 1968, modified 1994
& 1999
Builder Appledore
Shipbuilders
Classification MSA Grab Hopper
Dredger
Length Overall 62.5 m
Breadth Moulded 12.04 m
Draught Light 3.40 m
Draught Loaded 4.02 m
Gross Tonnage 1080 tonnes
Hopper Capacity 765 m3
Max. Dredge Depth 21.0 m
Main Propulsion 2 x 665 kw
Bucket Sizes 3 cu m heavy
digging
5 cu m soft digging
By Jack 2016-2-14 16:32
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Doris 2016-2-18 16:14