12 Years Factory wholesale 700WN Dredge Pump for US Factories

12 Years Factory wholesale
 700WN Dredge Pump  for US Factories

Short Description:

Product Introduction WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad. Features Overall structure performance well in marine use Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. Acco...


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for , , , Please sense no cost to speak to us anytime. We are going to reply you when we receive your inquiries. Remember to note that samples are available before we start our business enterprise.
12 Years Factory wholesale 700WN Dredge Pump for US Factories Detail:

Product Introduction

WN (Q) dredging pump is a kind of highly effective wear-resistant marine dredging pump, which is based on absorption of abroad technology. WN (Q) dredging pump meets the comprehensive dredging requirement at home and abroad.

Features

Overall structure performance well in marine use

Simple and reliable structure: 200WN-500WN and 600WNQ-1000WNQ type dredge pump with a single pump casing or double pump casing, single stage single suction cantilever horizontal structure. According to the connection type with the gear box, there are two kinds of typical structure, one is with independent support, the other is combined with gear box. The lubrication of pump with support is grease lubrication or thin oil lubrication. The double casing design can make the pump body safe even when the liner is worn out. Easy to disassemble and  maintenance: WN type dredging pump can be disassembled from front. This make the disassemble and maintenance easier.

Good performance of dredging

Good cavitation performance: WN type dredging pump have good cavitation performance which can ensure suction ability of pump. While it can achieve greater digging depth and higher suction concentration.

High flow capacity and wide applicability: WN type dredge pump impeller passage is very wide to continuous pumping gravel or high plastic clay and not happens jam. Good carrying ability of pump is guarantee for dredger performance.

Sharp Dropping performance curve: The flow and head curve falling steeply makes the mud pump having a stronger adaptability to the change of row spacing.

Achieving various blendings of pump performance: WN dredging pump can change the rotational speed and the diameter of the impeller, to achieve the different head of pump under the same flow.

Wear-resistant and long-life service wet parts

Wet parts of WN dredging pump , such as impeller, volute liner, throat bushing and frame plate liner insert(wearable liner) adopt alloy cast iron material whose hardness is not less than 58HRC. It has not only impact on resistance but also high anti-abrasion performance.

The service life of each part is fully considered in the process of product design. The same replacement cycle reduces the maintenance and replacement costs.

Small hydraulic loss, high efficiency, low power consumption: Due to the advanced hydraulic model, the dredging pump has high efficiency level. The efficiency of WN dredging pump is higher about 2-3 percentage points than imported. Thus, in the same production, it can achieve lower fuel consumption.

A reliable seal and no leakage

200WN-500WN dredge pump adopts mechanical seals or packing seals or combination of  mechanical and packing seals.

600WN(Q)-1000WN(Q) dredge pump adopts shaft seal with L-shaped screw shell rubber seal device which has three L-shaped seal rings and one shaft sleeve with special thread.

Technical Parameters

    Pump           Model
                             
    Capacity        Q (m3/h) Head H  (m) Speed  n (r/min)      Eff.     (%)  NPSHrn       (m)
   Inlet Diameter (mm)     Outlet       Diameter     (mm) Max. Diameter of    Flowd       Particle (mm)
200WNQ 600-800 20-40 700-900 60-65 <4.5 250 200 178
200WN 750-1000 40-65 700-850 70-72 <4 250 200 180
250WNQ 950-1100 20-40 500-700 65-70 <4 300 250 220
250WN 1100-1300 40-65 500-650 70-74 <4 350 250 144
300WNQ 1500-1800 20-40 400-600 65-68 <4 350 300 241
300WN 1800-2200 40-65 400-550 74-78 <4 450 300 241
350WN 2600-3000 40-65 400-550 74-78 <4.5 450 350 245
400WN 2800-3200 20-40 400-550 74-78 <4.5 450 400 250
450WN 3200-3850 40-67 350-500 76-80 <4.5 600 450 354
500WNQ 3600-4200 20-40 220-320 72-75 <4.8 600 500 330
500WN 4500-5500 30-72 350-450 78-80 <4.8 650 500 250
600WN 5000-9000 30-75 280-420 81-85 <6 660 600 220
700WN 8000-12000 30-76 280-380 83-85 <6 760 700 280
800WN 10000-15000 28-72 260-350 80-84 <6 900 800 300
900WN 12000-19000 25-75 220-330 85-87 <6 960 900 320
1000WN 16000-25000 23-76 181-290 85-87 <6 1200 1000 350

 

 


Product detail pictures:

12 Years Factory wholesale
 700WN Dredge Pump  for US Factories detail pictures


Our company promises all buyers of the first-class products and solutions as well as most satisfying post-sale support. We warmly welcome our regular and new shoppers to join us for 12 Years Factory wholesale 700WN Dredge Pump for US Factories, The product will supply to all over the world, such as: Netherlands , Paraguay , Frankfurt , With more than 9 years of experience and a professional team, we have exported our products to many countries and regions all over the world. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.


  • A 60,000 psi direct drive pump provides more actual cutting power than a 90,000 psi hydraulic intensifier with the same size motor. With the same abrasive flow, the direct drive pump cuts faster and at a lower cost.

    For more about OMAX, visit http://www.headland.com.au/machinery/fabrication-machinery/water-jet/



    Find more info http://www.miningok.com/

    Contact person: Mr Jason Lau
    Tel: +86-21-51690096
    Fax: +86-21-51690095
    Email: jason@dingbocrusher.net
    Add:No.17, Jinwen Road, Pudong Airport Industrial Park, Pudong New District, Shanghai, China

    Shanghai Ding Bo heavy industry machinery co., LTD
    Shanghai Ding Bo heavy industry machinery co., LTD is the pioneer enterprise of mining technology and equipment, at the core of the Yangtze river delta economic zone ofsea, convenient – Shanghai, is effectively combine advanced technology with the traditional technology of high-tech enterprises.

    The main products of the company
    Shanghai Ding Bo heavy industry machinery co., LTD. Has the abundant technical force and strong production capacity, the company’s products in mining, roads, Bridges, housing construction and other industries widely used, crusher, grinding machine, feeding machine, vibrating screen, sand washer, belt conveyor equipment and series of products, all passed the ISO9001:2000 standard quality certification.

    The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.







    5 Stars By Miguel 2015-11-29 15:24
    In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.

    5 Stars By Matthew 2016-11-18 17:10